Download

PERHATIAN…!!Bagi Anda yang telah atau sedang melakukan download SISFOKOL, harap membaca semua komentar dari kanal download ini. Selain itu juga banyak solusi – solusi untuk menangani berbagai bugs atau error, bisa dilihat di kanal Solusi Bugs, dan Milist Diskusi SISFOKOL serta Petunjuk Lain. Hal ini bertujuan agar kepuasan dan kenyamanan Anda dalam menggunakan produk kami, semakin nyata.

Berikut paket SISFOKOL yang bisa anda nikmati :

SISFOKOL v4.0 (code:NyurungBAN), 11Pebruari2012.

* SISFOKOL_v4.0_SMK

* SISFOKOL_v4.0_SMA

* SISFOKOL_v4.0_SMP

* SISFOKOL_v4.0_SD

untuk download, LinuxBIASAWAE dan SISFOKOL, bisa lihat alamat situs berikut :

http://omahbiasawae.com/sisfokol/

http://linuxbiasawae.unm.web.id/

http://sisfokol.bitnet.web.id/

http://library.borcess.com/iso/linux_biasawae/

http://sisfokol.randymandala.net/

http://www.baliexoticcoffee.com/linux_biasawae/

http://ftp.itb.ac.id/pub/ISO-IMAGES/linux/linux_biasawae/

http://tech.groups.yahoo.com/group/sisfokol/message/995/

Like this:

Be the first to like this page.

364 Comments »

364 Responses

on July 8, 2008 at 11:27 am amed

minta tolong dunk
on July 14, 2008 at 4:14 am sisfokol

ya. gmana…?
on July 15, 2008 at 2:11 pm peno

aq mau download mna link nya bos besar
on July 16, 2008 at 1:19 am Jakaria

Mas gimana Kabar Sisfobel nya??
waktu itu katanya Oktober 2007 Mau Keluar Sisfobel 2.0, tapi kok gak ada sampai sekarang???
on July 17, 2008 at 3:55 am sisfokol

sepertinya project SISFOBEL tidak dilanjutkan lagi.

hanya tersisa SISFOKOL saja yg akan tetap lanjut.
on July 17, 2008 at 3:58 am sisfokol

kan belum dirilis. jadi blm ada link utk download. lihat beritanya dong.
on August 3, 2008 at 12:35 pm amednduetz

bos kapan bisa nempil download sisfokol 2.0 katanya agustus
n q hubungin k HP nya kok g bisa
on August 4, 2008 at 4:10 am sisfokol

Rilis SISFOKOL v2.0, akhirnya telah ditentukan tanggal rilisnya. Yakni pada 17 Agustus 2008 ini. Datang lagi aja pada tanggal tersebut. Sementara kalau hubungi saya pas tidak bisa, sms dulu aja. soalnya sering luar kota.
on August 16, 2008 at 6:09 am Alfin

Makasih mas, infonya, yang berminat dengan ebook, semoga link ini bisa membantu http://sinauonline.50webs.com/Download%20Area.html
on August 16, 2008 at 6:34 am SinauBisnis

pa kbr Jir? moga sukses sisfokol-nya
on August 16, 2008 at 2:06 pm tiyo

keren banget bozz sisfokolnya…
on August 16, 2008 at 2:36 pm handoko

untuk yang SMK kapan Yaaa?
on August 16, 2008 at 3:02 pm Ibenk

Saya download di http://www.geocities.com/sisfokol/ bisa. Thanks
on August 16, 2008 at 3:12 pm empe

wahh.. kabar baik nih, izin diintip ya
on August 17, 2008 at 2:50 am Idham

Mohon untuk SMK juga dipercepat rilisnya..
on August 17, 2008 at 3:25 am SISFOKOL SLTA v2.0 | SentraLinux

[...] Tentang petunjuk instalasi dan aturan – aturan lainnya, bisa anda lihat pada paket file, yang bisa anda ambil di menu ‘download‘. [...]
on August 17, 2008 at 3:32 am render

katanya diliris tgl 17 agustus 2008, kok skarang masih kosong….!
on August 17, 2008 at 4:39 am sisfokol

link download, ada di beberapa mirror diatas. salah satunya : http://www.geocities.com/sisfokol/ .
on August 17, 2008 at 4:42 am sisfokol

kabarku baik – baik aja. cuman lagi sibuk aja. untuk SMK, akan aq rilis awal bulan depan, september 2008. pas puasa ramadhan.
on August 17, 2008 at 8:22 am bytescode

thx bro atas sisfokolnya sudah gw sedot. keren juga setelah diuji coba di server lokal. tdk spt versi pertama, dimana bugs tsb tdk ada lg (mhs ingat imel yg gw kirim dulu dan sedikit saran pemecahan yg kebetulan gw temui?)
OK, met kerja ajah. untuk sisfokol lainnya akan gw tunggu. maju Indonesia. merdeka!!
on August 18, 2008 at 12:24 am Citra Paska

Bisa ikutan dalam tim SISFOKOL, tidak?
on August 18, 2008 at 3:59 am sisfokol

sementara ini blm bs. nanti kalau deskripsi pengembangannya udah jelas, akan saya kasi tahu kabar berikutnya. biar kerja tim tahu akan tugasnya masing – masing.
on August 18, 2008 at 7:41 am Citra Paska

Oke. Kalau masih belum bisa, kayaknya asyik kalau aku bikin aplikasi yang kompatibel dengan SISFOKOL. Biar terjadi simbiosis yang saling menguntungkan. Meski tidak kerja dalam satu tim, tim yang beda, aplikasinya bisa tetanggaan.
on August 19, 2008 at 5:39 am Arintoko

bos..thx bgt. aspirasiku sudah dipenuhi..
on August 20, 2008 at 12:36 am dicky

Maaf ney.. saya udah download dari mailing list sisfokol…
saya dah konfigurasi dan berhasil berjalan.

Namun saya bingung… dalam petunjuk bahwa administrator itu punya hak untuk mengatur hak akses user, sedangkan pada menu untuk admin hanya untuk setting password dan reset passwords….

Mohon penjelasannya, pak… Terima kasih
on August 20, 2008 at 4:23 am sisfokol

begitulah tugas admin. urusan total untuk pengelolaan sistem informasi sekolah, diatur oleh bagian tata usaha.
on August 21, 2008 at 3:26 am ilul

hi frend, mau nanya yah..
saya masih bingung about..
1. apa yang harus di rubah di file konfigurasi pada folder inc.
tolong berikan contoh..mis pada untuk paket sd
2. apa yang menjadi alamat yang di ketik pada server untuk
mengkoneksikan. misalnya untuk paket sd http; localhost/….???
3. gimana cara menbuat tabel baru pada database
thats all frend
tb4 ya..
on August 21, 2008 at 7:55 am sisfokol

1). anda bisa mengubah nama sekolah, koneksi database, alamat situs dan lainnya.

misal yg penting aja, seperti:
$sek_nama = “SD Dimana III”;

$sek_alamat = “Jl. Raya Kampung Laut”;

$sek_kontak = “Telp. 080989999″;

2). $sumber = “http://localhost/”;

ini berguna utk url alamat situs di kotak address browser.
jadi jika anda telah meletakkan di folder web yg ada di apache misalnya, anda bisa langsung panggil nomer IP atau nama domainnya. yang pasti, alamat situs yg akan diakses, harus sama dengan nilai yang ada di ‘$sumber’.

misal :
$sumber = “http://www.situsku.com/”;
$sumber = “http://127.0.0.1/”;

3). koneksi db

$xhostname = “localhost”;

$xdatabase = “sisfokol_SD_v2″;

$xusername = “root”;

$xpassword = “”;

ini dipakai utk koneksi database. sesuaikan dengan konfigurasi MySQL yang ada di server komputer anda.

sedangkan utk membuat table database, anda tidak perlu. tapi cukup import file ‘.sql’ yg ada di folder ‘db’. yang penting anda telah bikin database, bisa menggunakan phpmyadmin atau mysql-dump lainnya, setelah itu jalankan file query tersebut via import.

good luck.
on August 28, 2008 at 5:06 am wahyu

saya sudah menggunakan sisfokol sma
spesifikasi minimal web server sudah saya penuhi.
masalah yang saya temui :
reset password untuk semua level user bisa dijalankan dan pasword baru sudah tersimpan di database.
tetapi pada waktu login – pasword baru tersebut tidak bisa digunakan.
ini saya beri contoh tampilan reset pasword untuk siswa baru.

NIS : ,Nama : Password Baru : c0ead3e

password baru muncul, akan tetapi NIS dan nama tidak muncul.
kira -kira kesalahan ada dimana. trims
on August 29, 2008 at 4:24 am sisfokol

reset password tersebut memang berhasil. kemungkinan masalah pengambilan nilai $_POST dari NIS atau nama atau kode unique siswa, yang menyebabkan update ke database tidak sesuai keinginan kita.

coba cek spesifikasi webserver anda. bila anda pakai xampp, cobalah yg terbaru, v1.6.7 . sementara solusinya begitu, sampai solusi baru telah saya peroleh, khususnya perihal pemasangan di berbagai bentuk versi webserver.
on September 3, 2008 at 2:54 am peng

aku coba liat2 dulu ya.. tak coba download dulu… tapi makasih sebelumnya…
on September 3, 2008 at 4:21 am sisfokol

ok. thanks telah ‘berani’ coba karya saya . good luck.

oh iya, bagi teman – teman yang menemukan bugs, solusi sudah saya dapatkan. lihat link kategori ‘solusi bugs’.
on September 4, 2008 at 6:27 am wahyu

bug reset pasword dan ganti password sudah bisa saya atasi.
bug saya temukan lagi pada waktu memberi nilai pada siswa. nilai tidak bisa tersimpan dan pada laporan file pdfnya tidak bisa dibuka.

kesalahan ada dimana ya

trims
on September 4, 2008 at 7:14 am sisfokol

utk versi pdf reader, udah yang tinggi…?. itu terjadi pada SISFOKOL apa…? bagian akses siapa…?. nanti saya cek lagi. thanks infonya.
on September 6, 2008 at 3:15 am wahyu

saya masukkan nilai NH , NR, NS (Nilai Semester) dan berhasil.
Tetapi pada laporan nilai rapor yang diproses hanya Nilai Harian dan Nilai Remidi. Untuk nilai semester tidak ikut diproses.
Untuk rumus nilai raport rumusnya apa sih ?

bisa ndak rumus nilai raport diubah seperti ini :

nilai rapor = 4NH+2NTS+2NS
——————–
6

NH : rata-rata nilai harian
NTS : nilai tengah semester
NS : nilai semester

mohon pencerahan.
trims
on September 6, 2008 at 4:18 am sisfokol

nilai rapor-nya, memang perhitungannya tidak melibatkan nilai ulangan semester. hanya rata – rata nilai ulangan harian saja. yang anda gambarkan itu adalah nilai raport utk akhir semester kan…?

untuk laporan nilai raport tengah semester dan akhir semester, memang masih sama rumusnya.

jika anda mau memodifikasi rumusnya, anda bisa bongkar file laporannya tersebut. disitu nanti akan anda temukan yang bisa diubah.

tentang modifikasi hal ini, akan saya jelaskan nantinya.

good luck.
on September 8, 2008 at 2:35 am amed

mas registry globalnya kudu mesti on ya g bisa di off in
on September 8, 2008 at 9:04 am sisfokol

maksudnya register global…?

ya, harus ON.
on September 8, 2008 at 9:05 am sisfokol

maksudnya register global…?

ya, harus ON. agar pengambilan nilai dari form – form bisa diambil dan diproses.
on September 8, 2008 at 12:24 pm deotiur

Donasi dalam bentuk hosting dan domain gratis untuk sisfokol, misal pake nama sisfokol.org. gimana bisa?
on September 9, 2008 at 12:04 pm d3w3w43

mas, saya sudah coba pake, tapi saat masukkan user admin, password admin kok keluar peringatan passworda salah…..mohon solusinya. thanks
on September 10, 2008 at 5:54 am sisfokol

bisa.

tapi sementara hanya berlaku sebagai server mirror download dahulu. soalnya saya belum mnentukan nama domain yang cocok, selain itu juga masih ada sangkutan kebijakan dengan BIASAWAE Production.
on September 10, 2008 at 6:01 am sisfokol

apakah spesifikasi minimal webserver anda sudah benar…?

jika iya, seharusnya login sebagai administrator, dengan username = ‘admin’, password = ‘admin’, bisa dilakukan.
on September 10, 2008 at 3:36 pm deotiur

Oke mas sudah bisa tapi gambar loginnya tidak muncul….rubah phpnya gimana?
on September 10, 2008 at 9:08 pm koentjoro

mas, dah saya install di server lokal, dan databasenya dah saya import dari folder ‘db’, tapi pas di masukkan sebagai user admin kok tidak bisa ya, kenapa ? mohon bantuannya. makasih.
on September 11, 2008 at 4:30 am sisfokol

tidak bisanya bagaimana…?
dianggap salah…? atau bagaimana…?

harap pv via email ya, jika memang solusi yang saya tuliskan di situs ini, tidak bisa. sekalian kasi tampilan yg tdk bs.
on September 11, 2008 at 4:40 am sisfokol

gambar login tidak muncul…?

apakah setting path situs, pada bagian nilai ‘$sumber’, pada file ‘config.php’, pada folder ‘inc’, sudah benar..?
on September 13, 2008 at 6:37 am selvi

gimana caranya beli cd debian 4.0 ?????????????????/
on September 13, 2008 at 8:19 pm Nasrul

Hebat…….. Keren…. Ada raport online sebagus ini
salut… ama team nya.

buat referensi tugas akhir……
on September 14, 2008 at 4:12 am sisfokol

kalau mau beli debian, bukan disini tempatnya.
silahkan mampir saja ke situs sebelah di :
–> http://toko.baliwae.com
–> http://gudanglinux.com
–> http://distrolinux.net
on September 16, 2008 at 4:37 pm Hendy Irawan

SVN repositorynya di mana ya?

Trims.
on September 20, 2008 at 4:10 am sisfokol

list-nya blm ada.
on September 20, 2008 at 4:38 am pakpur

Sedang donlod … makasih banget Abang ..
on October 27, 2008 at 11:45 am Yuszak

Dear Tim Sisfokol

saya orang baru disini.:) saya telah mencoba SISFOKOL SLTP v2.0 . Alhamdulillah proses Instalasinya telah selesai dengan mudah, akan tetapi di awal saya menemukan masalah.dalam hal ini saya sudah mencoba menggunakan server yang berbeda.

1. dengan menggunakan WAMP server.tampilan awal keluar tetapi saya tidak bisa login sama sekali.
2. dengan cara instalasi yang sama menggunakan JSAS server saya berhasil login ( misal login admin ), tetapi disana saya hanya menemukan tulisan ‘ Anda Berada di ADMINISTRATOR AREA
{Harap Dikelola Dengan Baik.) ‘ dan menu Home , Setting dan log off saja.

3. dengan cara instalasi yang sama dengan online server Cpanel. saya tidak bisa login dengan keluar javascrip popup bertuliskan PASSWORD SALAH HARAP DIULANGI

trus saya mau tanya, di dalam folder db terdapat 3 buah file sql. sebaiknya yang mana yang dipakai?

mohon pencerahannya mas.terima kasih banyak.dan sukses selalu untuk kerja tulus ini.

Wassalam
on October 29, 2008 at 5:34 am sisfokol

thanks telah berkenan menggunakan produk FREE saya.

1. memang benar, di WAMPP, kurang berjalan sempurna.

2. jika anda membaca arsip berita di situs SISFOKOL, hal itu sudah dijelaskan. Bahwa petugas administrasi sekolah adalah akses Tata Usaha (TU), bukan akses admin.

3. jika file database telah di-import, dan benar, harusnya segala bentuk akses login, akan berhasil. harap di cek lagi.

4. file database yang bs dipakai utk ‘import’ ke server database anda, tiga file tersebut isinya adalah sama semua.

good luck,

wa’alaikum salam.
on October 29, 2008 at 7:53 pm BRAM

Wah Boz, keliatannya agak kewalahan yah?
Apa butuh bantuan nih?
Sory aku lum sempet test sourcemu yg terakhir. Cuman kalo memang belum ada perubahan fundamental dalam akses (read/write) data, aku mau kasi info aja kalo proses query pada data lebih dari 100ribu record (terutama tabel ulangan_harian dan ulangan_rata) akan melambat dengan signifikan (gila bok rasanya kalo ngadepin system yg live).
Saran aja kalo bisa jangan sering menggunakan “SELECT * ” tp coba rujuk langsung nama field yg dibutuhkan biar ndak gembos di mysqlnya. Sori ini adalah hasil pengalaman pribadi di system yg live.
Pertimbangkan jg penggunaan LIMIT, bayangkan untuk cari 1 data aja harus searching 100-300ribu baris. Belum kalo dikalikan 40-50. Wuih !!!
Oh ya kalo nilai siswa sudah terisi dan suatu saat siswa tersebut dipindah ke ruang/kelas lain kok nilainya ndak ikutan yah, sori nih kalo dah diperbaiki di versi yg ini. lum coba sih he he he
gitu dulu Boz, FR ku, ntar kalo ketemu masalah lg aku join lg deh thanks b4
on October 29, 2008 at 7:57 pm BRAM

Oh yah satu lg, ada fasilitas yg mirip VIEW nya SQL Server 2000 gitu di MySQL? mungkin perlu dipertimbangkan main – main seperti gitu. Trus juga Indexing field tabel. Lumayan membantu kok, tp tidak menyelesaikan masalah sih. OK
on October 30, 2008 at 4:23 am sisfokol

perbaikan coding-nya sih juga lumayan.

terus masalah query MySQL agar lebih cepat, juga tetap aq pakai tekniknya.

pembacaan semua field setiap query SQL, masih ada.

sistem LIMIT utk per page data, sudah aq atur.

thanks masukannya.

ini juga lagi aq kerjakan solusinya, yang akan jadi v2.1 ntar rilisnya aq kabari lagi di situs.
on November 1, 2008 at 5:26 am Pak Poe

aku gabubg ah…
on November 12, 2008 at 1:06 pm BRAM

Code untuk mempercepat query telah di-inject-kan tp lum tau hasilnya karena sekolah masih sibuk poenya gawe.. bazaar ( hiks!!
Tp entar lg ulangan akhir semeseter dan mulai input2 nilai, wah grogi nih, berhasil gak yah tricknya? he he he (ku harap berhasil)
Oh ya satu lagi (sori, ini juga karena masih belum coba source yg ver ini (2.0)), dah ada laporan untuk wali kelas kan untuk nilai akhir semester?
Istilahnya DKN (Daftar Kumpulan Nilai)(bukan Daftar Koleksi Nilai) ntar Diknas ngamuk ngrubah2 singkatan he he he (padahal mereka jg paling hobi ngubah2 sistem penilaian dan kita yg pusing)
Untuk jenis laporan yg satu ini emang paling bikin pusing mulai kepala sekolah, wakasek kurikulum dan EDP (he he he) karena tiap sekolah punya penafsiran yg sangat berbeda jd kostumizenya amit2 ( > 70%)
on November 16, 2008 at 9:52 am sisfokol

memang begitulah keadaannya.

saat ini tiap sekolah punya wewenang utk menyempurnakan sistemnya sendiri – sendiri. kalo kita semuanya mau ikut yang di pusat, malah bisa – bisa sistem administrasi sekolah yang ada jai kacau balau.

cobalah hai bram, v2.0 . siapa tahu situ punya ide baru lagi.

memang di SISFOKOL belum ada DKN, soalnya terkadang beberapa sekolah juga bingung cara pengolahannya. daripada bikin bingung orang banyak, akhirnya tidak aq berikan menu tersebut.

ok. good luck.
on November 19, 2008 at 1:43 pm HOME « Mas samsul

[...] Tentang petunjuk instalasi dan aturan – aturan lainnya, bisa anda lihat pada paket file, yang bisa anda ambil di menu ‘download‘. [...]
on November 27, 2008 at 7:35 am ubcybers

wow…. keren om, thank’s yach
on November 30, 2008 at 9:34 am pray

mas… keren banget nih aplikasinya, aku dah coba yang v2.0, pengennya sih aku ngembaning sendiri, tapi pas liat sourcenya bingung minta ampyun, kayaknya mending buat dari awal kali yah… biar ngerti.. oh. iya mas.. kalo mo bikin aplikasi semacam itu atau yang lainnya, apa aja sih langkah2nya?
on December 3, 2008 at 4:37 am sisfokol

thanks telah coba karya saya.

memang tiap penulis programmer, punya cirikhas dan cara penulisan yang khas. biasanya beda orang beda metode. walaupun sebenarnya metode yang saya pakai saja, sebenarnya masih tidak standar. kalau anda pengin lebih mantap, lihat aja source – source CMS, seperti MAMBO atau wordpress. pasti akan lebih bikin pusing bagi mereka yang tidak biasa dengan coding seperti itu.

yang pasti kalo mo bikin aplikasi, kita harus tahu tentang :
* apa yang akan dibuat
* bagaimana logikanya
* alurnya seperti apa
* pakai program apa untuk membuatnya
* bagaimana menulis coding-nya
* bagaimana kalau nanti sudah jadi
* distribusnya
* ….dll.

itu adalah langkah – langkah teori saja.
tergantung nantinya, anda pasti akan bisa menemukan langkahnya yang tepat sendiri.

good luck.
on December 8, 2008 at 9:30 am angga

mas…
untuk import sql di folder db itu kan ada 3 file

sept04_1153.sql
sept04_1154.sql
sept04_1155.sql

itu diimpor ketiganya?

saya cuma berhasil impor yg pertama. yg kedua dan ketiga gagal ada pesan error
on December 9, 2008 at 3:30 am sisfokol

pilih salah satu saja file-nya. karena pada prinsipnya, ketiganya isinya sama.
on December 9, 2008 at 4:27 am angga

oh gitu, pantes…
skrg sudah bisa mas

trims
on December 10, 2008 at 5:50 am rino

mas tanya?
kenapa ketika saya coba di browser terjadi kesalahan sbb:

Warning: mysql_connect() [function.mysql-connect]: Lost connection to MySQL server at ‘reading initial communication packet’, system error: 111 in /var/www/source/inc/koneksi.php on line 17
Lost connection to MySQL server at ‘reading initial communication packet’, system error: 111

saya menggunakan server ubuntu ibex
on December 11, 2008 at 4:57 am sisfokol

harusnya instalasi tidak masalah. silahkan coba pada webserver yang berbeda atau distro yang berbeda.

beberapa teman jg sering mengalami masalah, saat memakai sisfokol di distro ubuntu.
on December 18, 2008 at 4:13 am citra

tetep aja ga bs login sbagai admin. padahal user dan password udah benar. saya pake Vertrigo sbg web servernya
. bermasalah ya??
tolong masukannya!!
terima kasih!
on December 18, 2008 at 4:29 am sisfokol

sudah coba pake XAMPP atau AppServ…?

kalau memang setting dan instalasi sudah benar, berarti masalah ada di webserver anda. silahkan bandingkan dengan webserver lain dl.

sebab saat perancangan dulu, tidak melakukan testing di Vertigo. thanks atas laporannya.
on December 18, 2008 at 6:41 am citra

bs ga registrasi user d user interfacenya admin?? cman ada home , setting dan log out ja…??? hiks hiks hiks….
on December 19, 2008 at 2:55 am sisfokol

silahkan anda baca semua komentar yang ada di kanal ‘download’ ini. baca juga file petunjuk yang ada.

baca dulu, kalo tidak ada penjelasan, anda baru bisa tanya. diatas sudah dijelaskan kalo yang mengurus administrasi sekolah itu bagian tata usaha. HARAP DIPERHATIKAN…!!.
on December 30, 2008 at 3:21 pm ninno

jir, aku pesen SISFUCKALL ono ora..??????? Ha.. ha.. piye kabare ndes..
on December 31, 2008 at 4:56 am sisfokol

wah… wah….. dumeh wes sukses dadi gaya ya… .
ojo petingkah ndul, awakmu bs dimasa wong akeh neng situs ki ngko…!!
kabarku apik wae. cuman lg galang mental go keluarganan.
on January 4, 2009 at 3:37 am Galih

saya udah coba sisfokol dengan XAMP 1.6.6 sebagai servernya. saya coba runing dan berhasil masuk menu login, saya isi sebagai administrator, username: admin pass: admin
lalu saya proses, dan muncul kotak dialog untuk masukin username dan passwor lg. saya bingung diisi apa.
saya coba kosongin dan muncul tulisan page error seperti ini:

Server error!

The server encountered an internal error and was unable to complete your request. Either the server is overloaded or there was an error in a CGI script.

If you think this is a server error, please contact the webmaster.
Error 500
localhost
01/04/09 10:16:00
Apache/2.2.8 (Win32) DAV/2 mod_ssl/2.2.8 OpenSSL/0.9.8g mod_autoindex_color PHP/5.2.5

saya close webbrowsnya lalu saya jalankan lg. dan karang saya coba isi kotak dialognya disamakan dengan yg awal.
user:admin pass: admin tp masih sama muncul error.

apa error terjadi karena XAMP saya. soalnya saya punya 2 servernya, WAMP & XAMP. tp yg WAMP ga runing ko…
on January 7, 2009 at 4:34 am sisfokol

itu error pada webserver anda, bukan pada SISFOKOL.

silahkan pake satu webserver saja.
misal XAMPP 1.6.7 .

good luck.
on January 12, 2009 at 3:30 am Bram

Jir, trick yang dulu kamu kasih dah sip, untuk versi yg running di sekolah ku dah stabil (based on ver 0.9). Sori lum bisa upgrade ke versi 2.0
Lompatannya terlalu jauh. Takut mengganggu proses yg sudah berjalan.
Mungkin masih ada beberapa hal yang belum running well di versi yang ini tp yang penting untuk base processnya dah bisa jalan sesuai harapan. Seperti input nilai guru, melihat daftar nilai siswa untuk guru, wali kelas, dan kepala sekolah (oops modul aku acak2 he he he sori), dan juga raport sisipan (untuk raport semester karena sekolah masih membuat manual berdasar DKN maka ndak dipakai). Dan tak lupa satu ini DKN, yg dah kamu buat khusus untuk sekolah ku dulu, aku nda tahu apa dah standar DIKNAS (katanya WAKASEK sih standar) tapi pada kenyataannya sudah 2x ganti format (permintaan format terbaru belum penuhi). Pusing deh, masa’ DIKNAS tiap tahun mengganti seenaknya format DKNnya, untung format raport nda terlalu sering berubah.
Anyway thanks for support.

(ps: gue sedang mumet di bidang manufactur bro, kapan you menyusul? )
on January 16, 2009 at 3:24 am sisfokol

o….

ya begitulah kalo banyak kurikulum yg beredar.
asal sekolahnya komitmen sendiri dengan kurikulum yang ada, pasti yang bawah tak akan pernah pusing.

nanti dulu, aq lg konsen di “persewaan buku” dan “sisfokol”. kuwi wae wes lumayan nyita waktu. opo maneh nambah swastanan lagi, bs2 keno insomnia tahunan lagi… . . .. . h e e. .e e
on January 16, 2009 at 10:32 am abd. azis wasik

aku sudah berhasil menggunakan Sisfokol V2 tinggal sedikit masalah saja, hanya tampilan warna dasar kok halaman webnya kok nggak bisa dirubah tolong gimana caranya biar tampilannya lebih cantik, soalnya logo untuk login sudah aku ganti sesuai sekolah.

makasih….
on January 18, 2009 at 3:55 am sisfokol

itu bisa anda ubah.

sisfokol menggunakan sistem template.

coba lihat folder ‘template’. disinilah mereka berada.

salah satunya, disitu anda bisa edit file ‘index,html’ . nanti semuanya bisa ikut berubah interface-nya.

anda juga bisa mengubah tiap menu – menu yang ada, dengan template yang berbeda pula. tentu saja dengan sedikit utak-atik pada source file-nya.

good luck.
on January 21, 2009 at 7:13 am krida85

mas” tolong sisfokol dibuat dengan framework semisal codeigniter seperti aigaion(library system) atau inktype (blog manj system), biar kita bisa ngembangin dan menambah module dengan mudah”
on January 22, 2009 at 4:53 am sisfokol

mungkin suatu saat jika ganti konsep.

sebab konsep yang ada saat ini, memahg full coding. tujuannya agar lehih OOP, file tidak gemuk, loading gak terlalu berat, sederhana. Bisa dipasang dengan mudah pada berbagai webserver dan OS yang beda.

Dan mudah modifikasi konsepnya jika ada kurikulum sekolah yang berubah. jadi belum full AJAX, maka belum saatnya pake framework.

harap maklum adanya dulu.
on January 22, 2009 at 5:35 am krida

saya sendiri dan bebarapa teman telah mengembangkan dan menggunakan aplikasi sistem informasi perpustakaan dengan menggunakan koha library system (http://www.koha.org/) untuk proses sirkulasi perpustakaan bila ada yang berkenan dan ingin membangun sistem perpustakaan yang terintegrasi silahkan hubungi kami di krida85.wordpress.com , oiya mas muhajir ni aku baru mencoba untuk menggunakan sisfokol
on January 22, 2009 at 7:26 am cah kurtekdik

mantan muridmu ki Mas….
awal2 kemunculanya dah tak coba, bagus. Ya sekedar iseng nyoba2 aja. karna ga jelas mo diaplikasiin buat sapa, ya mandeg deh pada tahap nyoba.

Tapi kini, ada job minta di buatin sistem kaya gini, jadi… kembali deh ke sisfokol. Semoga versi terbaru sesuai kebutuhan klien, Amin….

Semangat terus Mas Hajir, Btw neng Kendal pa Semarang Mas, jadi misal ada kebuntuan bs ketemu, he..he..Kalo sempet

Thank
on January 24, 2009 at 12:36 pm wayan

wah tlg di compile dunk ke component or module atau plugin wordpress…biar gampang
on January 27, 2009 at 8:47 am sisfokol

thanks telah pake sisfokol ya. mg2 sim perpus-nya sukses jg.

aq sekarang lebih banyak di kota kendal.

sisfokol versi online, nantinya juga akan aq buat. biar semua bisa coba langsung.

amin.
on February 1, 2009 at 6:48 am masiyant

Alhamdulillah akhirnya bisa menemukan Sistem Informasi Sekolah sebagus ini, Free lagi, ma kasih ya mas, kenalin aku yanto dari SMP N 3 Boyolali, pekerjaan di Tata usaha, wah kayaknya harus bisa di implementasikan di sekolah ini, karena dengan sistem manual sekarangg banyak reportnya,
Ni Masih coba coba menggunakan,
Oh Ya mas Bisa gak Aku di kasih Konsep Diagram alur perancangan sistem ini, ya Siapa tahu ntar bisa untuk referensi mengerjakan Tugas Akhir Kuliah,
Saya juga pingin membuat aplikasi Sistem administrasi pembayaran SPP tapi mau tak buat Desktop Aplication menggunakan java. masih cari referensi sistem pembayaranya yang lumayan gak ribet sepeti apa

ttd
http://masiyant.co.cc
on February 3, 2009 at 7:39 am sisfokol

ok. thanks telah pake karya aq.

tentang perancangannya, anda bisa membacanya sendiri. aplikasinya kan sudah ok. anda bisa mengira – ngira aja seperti apa diagram alurnya.

yang pasti kalo anda mau bikin aplikasi desktop, seperti halnya web, perancarangan database juga perlu yang baik.

good luck.
on February 11, 2009 at 11:39 am abd. azis wasik

saya tambahkan data siswa baru dengan NIS dana Nama siswa sudah bisa tambah, tapi pada permintaan reset pasword oleh admin kok keluarnya cuma paswordnya saja sementara NIS dan Nama siswa tidak muncul yang akhirnya kalau login pakai user siswa tidak bisa

apakah pada Remidi cuma 2 kolom apa nggak bisa ditambah.
on February 12, 2009 at 4:39 am sisfokol

tentang ‘reset password’, cara memperbaikinya ada pada ‘solusi bugs’ dan sudah pernah dibahas hal ini.

ketentuan yang ada adalah remidi maksimal 2 (dua) kali. belum ada penambahan remidi. jika nanti dari teman – teman lain, ternyata perlu adanya penambahan remidi, mungkin kelak di versi berikutnya, bisa di set sendiri.
on February 17, 2009 at 2:22 am cHuby

aku dah donlod sisfokol SMK.. tapi koq gda databsenya ya..
on February 17, 2009 at 3:18 am sisfokol

ada. anda harus import database dahulu, menggunakan phpmyadmin.

file source sql, ada di folder ‘db’.

harap dibaca semua petunjuk yang ada.
HARAP DIPERHATIKAN.
on February 24, 2009 at 9:38 am Muhammad Spn

mas ko link untuk downloadnya ga bisa ya,
on March 2, 2009 at 3:48 am sisfokol

semua link bisa kok.

jika gagal pakai yang satu, masih ada link yang lain.

silahkan anda coba.

kalo masih tidak bisa, silahkan ambil di milst sisfokol yang ada di yahoogroups.
on April 19, 2009 at 1:08 pm adang

saya mencobadi lokal dengan apache,.. tampilan adminnya lari-larian, sudah mengadminnya???

ada trial online demonya ngak ya???
on April 19, 2009 at 2:32 pm mul14

We need screenshot!!
on April 20, 2009 at 5:56 am sisfokol

sudah benar setting-nya…?.

semua solusi ada di kanal ‘download’ ini.

semua solusinya sudah ada.
silahkan dibaca dengan baik.
anda pasti bisa.

kalo butuh screenshot semuanya, ada pada paket cd donasi.
lengkap dengan manual e-book buku pedoman.

good luck.
on May 15, 2009 at 5:49 am Selamet Hanafi

Terima kasih atas versi free – nya. Di sekolah sudah saya kustom biar sesuai dan mudah digunakan. Semoga tetap berlanjut
on May 17, 2009 at 3:21 am Hajir

Smg2 selalu bermanfaat. Amin.
on June 3, 2009 at 4:01 am Yuche

Salut pak dgn kerja kerasnya..

Sisfokol rencana mo saya aplikasikan di SMAN 1 Pati, karena PAS yg dari dinas pendidikan susah banget dibuat web version dan terkesan sangat berbelit-belit. Saya lihat sistem anda ini sangat luar biasa.

Gimana caranya mengubah username pada tiap-tiap tipe login ya?

Trs, gimana juga caranya supaya masing-masing guru dan siswa mempunyai user name dan password sendiri-sendiri?

Saya tunggu respon dari anda.
Terimakasih.

Yuche
SMAN 1 Pati
085640599601
on June 4, 2009 at 12:41 am sisfokol

Thanks tlah coba karya saya.

Utk reset password para user, dilakukan oleh admin.

Sedangkan utk menambah user, dan memberi akses, dilakukan oleh TU. Dengan password default sama dengan username.

Saran saya, gunakan aja versi donasi. Siap pakai. Anda tdk perlu ribet lg utak-atik bugs yg ada. Selain fix bugs, jg ada tambahan menu kenaikan kelas.

Goodluck.
on June 4, 2009 at 1:21 pm Patman

Thank..
on June 13, 2009 at 4:37 am tatank raharjo

saya sudah berhasil menjalankan program ini..namun ada sedikit pertanyaan..bagaimana kalo tampilan headernya menyesuaikan websitenya..misalkan web saya adalah http://www.smkjaya.com jadi program ini bisa dibuka disana..terintegrasi..terima kasih…saya menggunakan joomla v.1.5
ato bisa juga dibuat komponen joomla..
on June 23, 2009 at 10:25 am mustofa

mas untuk pass TU apa yah…saya sudah instalasi dan selesai, masuk admin ok..tapi password yang lainya apa yah?

tq
on June 23, 2009 at 10:31 am mustofa

saya sudah coba pake username 120386458 dan pass defautnya itu tetapi tidak bisa.
on June 24, 2009 at 5:35 am sisfokol

Contoh akses, ada pd file petunjuk. Semuanya bs dipake utk login. Harap dibaca dgn baik.
on June 28, 2009 at 6:46 am sisfokol

utk : tatank raharjo.

SISFOKOL adalah sistem informasi, program yang terpisah. Jadi jika ingin dimasukkan kedalam joomla, dalam bentuk komponen, tidak bisa.

solusinya, anda bikin link sendiri untuk SISFOKOL.
tidak bisa integrasi secara langsung.

jika ingin mengubah tampilan header yang ada, anda bisa ubah file – file yang ada pada folder ‘template’.
on June 29, 2009 at 4:57 am adi nodes

mas, download linknya mati. bisa minta download link yang lain atau upload ke server yang lain. pengen komentar tapi belum coba sistemnya nih DITUNGGU BANGET
on July 14, 2009 at 3:28 pm robi

OKeh bagus banget mas aplikasi web nya. Sekedar saran, gimana kalo menggunakan framework CakePHP.
on July 15, 2009 at 5:42 am sisfokol

Ok thanks telah coba karyaku.
Mgkin kelak versi berikutnya, akan aq gunakan framework.
on July 15, 2009 at 5:59 am bagazt_aj.Cilacap

Tank’s bro….
Sisfokol the best pokoke lah….
Semoga kedepan sisfokol semakin kreatif lg, dengan mengeluarkan produk2 yang sangat membantu dalam proses pendidikan….
Maju terus sisfokol….!!!
on July 28, 2009 at 2:11 am mivtech

Bos. Kayaknya yg sisfokol smp zip smk tar dan zip mati tuh linknya
on July 29, 2009 at 6:31 am charis

mas saya sudah install xampp, sdh buat database baru, sdh import db, sdh rubah config.php, tapi mau login type “administrator” username “admin” password “admin” kok belum bisa? apanya yg salah ??
on July 30, 2009 at 12:50 am sisfokol

@charis:
Thanks telah coba karya saya.

Harusnya itu udah bs. Silahkan cek koneksi database ke mysql. Mgkin username dan password, tidak sesuai. Goodluck.

@mivtech :
thanks infonya. Nanti jg akan aq tambah lg link mirror server download-nya.

@bagazt :
thanks jg. Mohon doanya ya. Amin.
on July 30, 2009 at 6:31 am charis

bagi teman-teman ini saya sedikit shering, cara install sisfokom :
1. download sisfokom
2. install phpmysql (atau bisa pakai xampp) pd drive C:\ atau D:\ atau yg lain
3. waktu install xampp : apache dan Mysql di centang
4. tunggu proses sampai selesai
5. extrak semua file di dalam folder source hasil download sisfokom yg dikompres tadi ke folder tadi C:\xampp\htdocs klu D:\xampp\htdocs
5. buka program browser-nya dan ketik pd adress “http://localhost/phpmyadmin” tekan enter,
6. klik Home (gambar rumah di pojok kiri atas)
7. pada form create new database buat baru, contoh: “smkm” klik create
8. klik Import yg letaknya di atas dan klik browse
9. cari file db. yg letaknya C:\xampp\htdocs\db\sept …… lalu klik GO.
10. Buka file config.php yg ada di C:\xampp\htdocs\inc
sesuaikan dg sekolah anda tapi jangan sampai hilang tanda petik (“), lalu pada KONEKSI DATA BASE coba dirubah sesuai dg data base tadi, contoh :
$xhostname = “localhost”;
$xdatabase = “smkm”;
$xusername = “root”;
$xpassword = “”;
setelah selesai simpan dan tutup
sekarang dicoba program browsing-nya, pada adress ketik http://localhost dan tekan enter, masukkan user name dan password seperti yg tercantum pada petunjuk sisfokom, nah berhasil kan…! Selamat mencoba.
untuk teman-teman saya tunggu komentarnya!
untuk Team Sisfokom terima kasih dan sukses selalu.”
on August 15, 2009 at 7:01 am wawan

mas ko abdi teh dah sedot tapi ko gak bisa dijalankan ya… padahal config nya dah diubah kenapa ya??
dan image nya gak bisa nampil…neyy mohon bantuannya ya..
on August 16, 2009 at 4:40 am sisfokol

Thanks tlah coba download karya saya.

Mgkin nilai ‘$sumber’ blm sesuai dgn alamat situs-nya.
Jika udah benar, image halaman depan akan muncul.

Goodluck.
on August 22, 2009 at 10:08 am drico

kok g bs login y?pdahal dah mgunakn smua usrname/pasword.
to mas charis gmana cranya?
on August 27, 2009 at 8:25 am sisfokol

@drico :
mungkin koneksi database ada yang blm cocok.
on August 28, 2009 at 1:19 am yono

Mas, aq install sama ndak keluar imagenya,
contoh ganti script untuk ‘$sumber’ gimana sih….

matur nuwun
on August 29, 2009 at 3:05 pm Santos

Ms beberapa minggu lalu aq coba program ini, semua berjalan baik kecuali bagian reset user baru persis pertanyaan ms wahyu dan sampai sekarang belum ketemu solusinya, padahal aq udah pake xampp terbaru. mohon bantuannya ya ms…!

Makasih…
on August 30, 2009 at 7:11 am sisfokol

@yono :
komentar sebelumnya pd kanal download ini, udah ada contoh. Silahkan dilihat.

@santos :
pd kanal solusi bugs, dan kanal petunjuk, udah ada penjelasannya. Silahkan dibaca.
on August 30, 2009 at 8:54 am Santos

Wah iya ms udah bisa sekarang, btw makasih atas petunjuknya.

Thank’s so much…
on October 24, 2009 at 5:43 pm Rifa'i

Makasih y atas ilmu yang di publikasikannya,,,mudah2n kedepannya mas2 smua lebih sukses lagi n ngasih ilmu yang lebih bermanfaat bagi kita semua,,thx 4 All
on October 24, 2009 at 10:42 pm wawan

Askum mas agus,,ak trial di webhost langsung kok gak isa login ya,,file config udah bener,,tapi tetep gak isa login sebagai admin ya mas,,mohon pencerahannya,,anda bisa lihat di http://blog.muuanis.co.cc
on October 24, 2009 at 10:45 pm wawan1103

mas,,ku kok gak isa login sebagai admin ya,,file config udah ak ubah,,emmm,,mohon pencerahannya,,mas isa lihat di http://blog.muuanis.co.cc
on October 29, 2009 at 2:42 pm masbanu

saya sudah instal di website sekolah saya (alamat diatas). namun saat login sebagai administrator, username: admin, password: admin, yang terjadi adalah blank screen, alias tidak muncul apa2. saya refresh berulang2 juga masih sama. bagaimana solusinya.
on November 2, 2009 at 4:36 am sisfokol

@rifa’i :
amin.

@wawan :
mungkin bs juga karena koneksi database anda, belum sesuai dengan user dan pass dari mysql-server.

harap dicek lagi.

@masbanu :
thanks telah coba karya saya. mungkin itu karena setting pada file ‘php.ini’, milik server anda.
terutama pada : error_reporting, variables_order, register_long_arrays, register_argc_argv, auto_globals_jit.

berikut beberapa setting yang bisa anda sesuaikan :

# php.ini
error_reporting = E_ALL & ~E_NOTICE
variables_order = “EGPCS”
register_long_arrays = On
register_argc_argv = On
auto_globals_jit = On

max_execution_time = 600
max_input_time = 600
memory_limit = 64M

display_errors = Off
log_errors = On
error_log = syslog
implicit_flush = On
output_buffering = 4096

session.save_handler = files
session.use_cookies = 1
session.name = SISFOKOLID
session.auto_start = 0
session.cookie_lifetime = 0
session.cache_limiter = nocache
session.cache_expire = 180

allow_url_fopen = On

file_uploads = On
upload_max_filesize = 10M
on November 3, 2009 at 3:22 pm wawan

mas agus,,kok gak isa ya,,misal kalu database server saya lom isa konek pasti buka index gak isa,,itu nyatanya isa,,tapi untuk login admin nya yang gak isa mas,,mohon pencerahannya
on November 17, 2009 at 7:05 am sisfokol

@wawan :
bila koneksi masih salah, buka file index home, terkadang masih bisa.
harap dicek lagi.
seperti :
–> setting pada php.ini
–> isi table database sisfokol.
on November 17, 2009 at 7:38 am zaqy arsat

aku sebenarnya banyak mas’alah ingin bergabung untuk menyelasaikan mas’alah di sekolah; akucari kok beulum juga nongol
on November 17, 2009 at 7:41 am zaqy arsat

mas’alah yang membelit aku adalah materi UN yang nenakutkan
on November 20, 2009 at 3:06 am abdul gadir

thanks bgt ya, so inspiring
on November 23, 2009 at 10:18 am sisfokol

@zaqy :
semoga cepat mendapatkan solusi.

@abdul :
good luck jg…
on November 25, 2009 at 2:46 am masiyant

Bagaimana caranya merubah tampilan/template dari Sisfokol. bagi yang dah pernah Uprek Sisfokol. Minta Step by Stepny agar tampilan sisfokol bisa di kombinasikan dgn theme websiteb skolah.
terima kasih
on December 3, 2009 at 8:08 am sisfokol

@masiyant :

lihat aja file2 yang ada di folder ‘template’.
default yang dipakai adalah ‘index.html’.

tapi tiap file menu sisfokol, anda bisa set sendiri.
silahkan bongkar source. khususnya pada bagian ini :

$tpl = LoadTpl(“template/index.html”);

silahkan sesuaikan dengan file template yg ada.

good luck.
on December 3, 2009 at 9:16 am Abu Abdullah

mas, saya baru coba install paket SD
semua udh setting , termasuk confignya
tapi ketika coba login, kenapa tidak sukses ya, error pun tidak
seperti diam ditempat, url pun tidak berubah
apanya yg salah ya
on December 5, 2009 at 12:37 am sisfokol

@abu :
harap perhatikan beberapa setting ‘php.ini’ pada webserver, yg perlu disesuaikan :

error_reporting = E_ALL & ~E_NOTICE
variables_order = “EGPCS”
register_long_arrays = On
register_argc_argv = On
auto_globals_jit = On

max_execution_time = 600
max_input_time = 600
memory_limit = 64M

display_errors = Off
log_errors = On
error_log = syslog
implicit_flush = On
output_buffering = 4096

session.save_handler = files
session.use_cookies = 1
session.name = SISFOKOLID
session.auto_start = 0
session.cookie_lifetime = 0
session.cache_limiter = nocache
session.cache_expire = 180

allow_url_fopen = On

file_uploads = On
upload_max_filesize = 10M
on December 15, 2009 at 6:01 pm Muchlis

Maaf mas, saya udah download beberapa kali dan berhasil. tapi saat saya pasang dan saya jalankan ada beberapa kendala.
1. Tampilan tidak seharusnya, gambarnya tidak tampil.
2. Function Date nya error.
3. Login ga mau masuk-masuk, sedangkan tidak pesan koneksi gagal.

mohon bantuannya mas, saya menggunakan XAMPP.
terima kasih.
on December 16, 2009 at 7:34 am sisfokol

@muchlis :
thanks telah coba karya saya.
berikut solusinya :
1. itu karena setting konfigurasi ‘$sumber’ tidak sesuai.
silahkan baca komentar2 pada kanal ini.

2. fungsi date, harusnya bisa.
mungkin pada XAMPP anda, ada yang error.
silahkan coba pada webserver pada versi dan tipe yg berbeda.

3. mungkin itu masalah ‘EGPCS’, pada setting ‘php.ini’ di webserver anda. solusi ada di kanal ini juga.
silahkan dibaca dibagian atas. . .
on December 27, 2009 at 1:51 pm bytescode

Cuman pengen sharing aja, sapa tahu ada juga yg mencoba sisfokol di Ubuntu (atau distro linux lainnya) :

Saya mencoba sisfokol slta untuk sekolah tempat ayah saya bekerja sbg guru, dimana semua pc, baik client maupun server lokal untuk sisfokol ini, berbasiskan linux, dipilih linux ubuntu jaunty, biar ga menggunakan produk bajakan dan mengajarkan siswa/i ttg produk open source agar tdk menjadi pembajak perangkat lunak (dan penggunanya) kelak.
Dan semua kegiatan berkomputer guru dan siswa/i d sekolah ini dgn ubuntu, mereka sudah biasa, dlm 2-3 hari saja.

Server daemonnya menggunakan server instan xampp (sebenarnya bisa sie menggunakan ubuntu server, cuman cdnya ketinggalan :peace: ). Cukup download, extract : tar -xzvf (nama_file_xampp.tar.gz) -C /opt/

Lalu jalankan dgn : /opt/lampp/lampp start|stop|restart

File sisfokol saya letakkan di /opt/lampp/htdocs/sisfosekolah/
Konfigurasi pd file2 lainnya mengikuti konfigurasi database saya di mysql.
Konfigurasi pd php.ini (gedit /opt/lampp/etc/php.ini) mengikuti yg disarankan ama mas agus muhajir sbb :
==========konfigurasi=========
[PHP]

;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; PHP’s initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP’s behavior.

; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server’s directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the –with-config-file-path compile time option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://php.net/configuration.file

; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from http://www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections

; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* – foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can’t find an expected
; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string (“bar”), or a reference to a
; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:

; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = “None” ; sets foo to the string ‘None’

; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.

; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.

; php.ini-development is very similar to its production variant, except it’s
; much more verbose when it comes to errors. We recommending using the
; development version only in development environments as errors shown to
; application users can inadvertently leak otherwise secure information.

;;;;;;;;;;;;;;;;;;;
; Quick Reference ;
;;;;;;;;;;;;;;;;;;;
; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP’s default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP’s behavior.

; allow_call_time_pass_reference
; Default Value: On
; Development Value: Off
; Production Value: Off

; display_errors
; Default Value: On
; Development Value: On
; Production Value: Off

; display_startup_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; error_reporting
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED

; html_errors
; Default Value: On
; Development Value: On
; Production value: Off

; log_errors
; Default Value: Off
; Development Value: On
; Production Value: On

; magic_quotes_gpc
; Default Value: On
; Development Value: Off
; Production Value: Off

; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)

; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096

; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off

; register_long_arrays
; Default Value: On
; Development Value: Off
; Production Value: Off

; request_order
; Default Value: None
; Development Value: “GP”
; Production Value: “GP”

; session.bug_compat_42
; Default Value: On
; Development Value: On
; Production Value: Off

; session.bug_compat_warn
; Default Value: On
; Development Value: On
; Production Value: Off

; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000

; session.hash_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5

; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off

; track_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; url_rewriter.tags
; Default Value: “a=href,area=href,frame=src,form=,fieldset=”
; Development Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; Production Value: “a=href,area=href,frame=src,input=src,form=fakeentry”

; variables_order
; Default Value: “EGPCS”
; Development Value: “GPCS”
; Production Value: “GPCS”

;;;;;;;;;;;;;;;;;;;;
; php.ini Options ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is “.user.ini”
;user_ini.filename = “.user.ini”

; To disable this feature set this option to empty value
;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine = On

; This directive determines whether or not PHP will recognize code between
; tags as PHP source which should be processed as such. It’s been
; recommended for several years that you not use the short tag “short cut” and
; instead to use the full tag combination. With the wide spread use
; of XML and use of these tags by other languages, the server can become easily
; confused and end up parsing the wrong code in the wrong context. But because
; this short cut has been a feature for such a long time, it’s currently still
; supported for backwards compatibility, but we recommend you don’t use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag = Off
; XAMPP for Linux is currently old fashioned
short_open_tag = On

; Allow ASP-style tags.
; http://php.net/asp-tags
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
; http://php.net/precision
precision = 14

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
; http://php.net/y2k-compliance
y2k_compliance = On

; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application’s output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you’ve already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering = 4096

; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to “mb_output_handler”, character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both “mb_output_handler” with “ob_iconv_handler”
; and you cannot use both “ob_gzhandler” and “zlib.output_compression”.
; Note: output_handler must be empty if this is set ‘On’ !!!!
; Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are ‘off’, ‘on’, or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression = Off

; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = On

; The unserialize callback function will be called (with the undefined class’
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn’t include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; This directive allows you to enable and disable warnings which PHP will issue
; if you pass a value by reference at function call time. Passing values by
; reference at function call time is a deprecated feature which will be removed
; from PHP at some point in the near future. The acceptable method for passing a
; value by reference to a function is by declaring the reference in the functions
; definition, not at call time. This directive does not disable this feature, it
; only determines whether PHP will warn you about it or not. These warnings
; should enabled in development environments only.
; Default Value: On (Suppress warnings)
; Development Value: Off (Issue warnings)
; Production Value: Off (Issue warnings)
; http://php.net/allow-call-time-pass-reference
allow_call_time_pass_reference = Off

; Safe Mode
; http://php.net/safe-mode
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
; http://php.net/safe-mode-gid
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
; http://php.net/safe-mode-include-dir
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
; http://php.net/safe-mode-exec-dir
safe_mode_exec_dir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
; http://php.net/safe-mode-allowed-env-vars
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won’t be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
; http://php.net/safe-mode-protected-env-vars
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/open-basedir
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-functions
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-classes
disable_classes =

; Colors for Syntax Highlighting mode. Anything that’s acceptable in
; would work.
; http://php.net/syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP’s default behavior
; is to disable this feature.
; http://php.net/ignore-user-abort
;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; http://php.net/realpath-cache-size
;realpath_cache_size = 16k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120

;;;;;;;;;;;;;;;;;
; Miscellaneous ;
;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; http://php.net/expose-php
expose_php = On

;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds
; http://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
max_execution_time = 600

; Maximum amount of time each script may spend parsing request data. It’s a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
max_input_time = 600

; Maximum input variable nesting level
; http://php.net/max-input-nesting-level
;max_input_nesting_level = 64

; Maximum amount of memory a script may consume (128MB)
; http://php.net/memory-limit
memory_limit = 64M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn’t be wasting
; resources complaining about best practices and coding standards. That’s what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
;
; Error Level Constants:
; E_ALL – All errors and warnings (includes E_STRICT as of PHP 6.0.0)
; E_ERROR – fatal run-time errors
; E_RECOVERABLE_ERROR – almost fatal run-time errors
; E_WARNING – run-time warnings (non-fatal errors)
; E_PARSE – compile-time parse errors
; E_NOTICE – run-time notices (these are warnings which often result
; from a bug in your code, but it’s possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it’s automatically initialized to an
; empty string)
; E_STRICT – run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR – fatal errors that occur during PHP’s initial startup
; E_CORE_WARNING – warnings (non-fatal errors) that occur during PHP’s
; initial startup
; E_COMPILE_ERROR – fatal compile-time errors
; E_COMPILE_WARNING – compile-time warnings (non-fatal errors)
; E_USER_ERROR – user-generated error message
; E_USER_WARNING – user-generated warning message
; E_USER_NOTICE – user-generated notice message
; E_DEPRECATED – warn about code that will not work in future versions
; of PHP
; E_USER_DEPRECATED – user-generated deprecation warnings
;
; Common Values:
; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED
; http://php.net/error-reporting
error_reporting = E_ALL & ~E_NOTICE

; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; It’s recommended that errors be logged on production servers rather than
; having the errors sent to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-errors
display_errors = Off

; The display of errors which occur during PHP’s startup sequence are handled
; separately from display_errors. PHP’s default behavior is to suppress those
; errors from clients. Turning the display of startup errors on can be useful in
; debugging configuration problems. But, it’s strongly recommended that you
; leave this setting off on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/display-startup-errors
display_startup_errors = On

; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://php.net/log-errors
log_errors = On

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
; http://php.net/log-errors-max-len
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; http://php.net/ignore-repeated-errors
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; http://php.net/ignore-repeated-source
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; http://php.net/report-memleaks
report_memleaks = On

; This setting is on by default.
;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean). Setting this value
; to On can assist in debugging and is appropriate for development servers. It should
; however be disabled on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/track-errors
track_errors = On

; Turn off normal error reporting and emit XML-RPC error XML
; http://php.net/xmlrpc-errors
;xmlrpc_errors = 0

; An XML-RPC faultCode
;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of inserting html
; links to documentation related to that error. This directive controls whether
; those HTML links appear in error messages or not. For performance and security
; reasons, it’s recommended you disable this on production servers.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: On
; Development Value: On
; Production value: Off
; http://php.net/html-errors
html_errors = On

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://php.net/docs
; and change docref_root to the base URL of your local copy including the
; leading ‘/’. You must also specify the file extension being used including
; the dot. PHP’s default behavior is to leave these settings empty.
; Note: Never use this feature for production boxes.
; http://php.net/docref-root
; Examples
;docref_root = “/phpmanual/”

; http://php.net/docref-ext
;docref_ext = .html

; String to output before an error message. PHP’s default behavior is to leave
; this setting blank.
; http://php.net/error-prepend-string
; Example:
;error_prepend_string = “”

; String to output after an error message. PHP’s default behavior is to leave
; this setting blank.
; http://php.net/error-append-string
; Example:
;error_append_string = “”

; Log errors to specified file. PHP’s default behavior is to leave this value
; empty.
; http://php.net/error-log
; Example:
;error_log = php_errors.log
error_log = “/opt/lampp/logs/php_error_log”
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
error_log = syslog

;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;

; Note – track_vars is ALWAYS enabled

; The separator used in PHP generated URLs to separate arguments.
; PHP’s default setting is “&”.
; http://php.net/arg-separator.output
; Example:
;arg_separator.output = “&”

; List of separator(s) used by PHP to parse input URLs into variables.
; PHP’s default setting is “&”.
; NOTE: Every character in this directive is considered as separator!
; http://php.net/arg-separator.input
; Example:
;arg_separator.input = “;&”

; This directive determines which super global arrays are registered when PHP
; starts up. If the register_globals directive is enabled, it also determines
; what order variables are populated into the global space. G,P,C,E & S are
; abbreviations for the following respective super globals: GET, POST, COOKIE,
; ENV and SERVER. There is a performance penalty paid for the registration of
; these arrays and because ENV is not as commonly used as the others, ENV is
; is not recommended on productions servers. You can still get access to
; the environment variables through getenv() should you need to.
; Default Value: “EGPCS”
; Development Value: “GPCS”
; Production Value: “GPCS”;
; http://php.net/variables-order
variables_order = “EGPCS”

; This directive determines which super global data (G,P,C,E & S) should
; be registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive are
; specified in the same manner as the variables_order directive, EXCEPT one.
; Leaving this value empty will cause PHP to use the value set in the
; variables_order directive. It does not mean it will leave the super globals
; array REQUEST empty.
; Default Value: None
; Development Value: “GP”
; Production Value: “GP”
; http://php.net/request-order
request_order = “GP”

; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don’t want to clutter your scripts’ global scope
; with user data. This makes most sense when coupled with track_vars – in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
; http://php.net/register-globals
register_globals = Off

; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
; are registered by PHP or not. As they are deprecated, we obviously don’t
; recommend you use them. They are on by default for compatibility reasons but
; they are not recommended on production servers.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-long-arrays
register_long_arrays = On

; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-argc-argv
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they’re first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
; http://php.net/auto-globals-jit
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
; http://php.net/post-max-size
post_max_size = 8M

; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
; escape any character sequences in GET, POST, COOKIE and ENV data which might
; otherwise corrupt data being placed in resources such as databases before
; making that data available to you. Because of character encoding issues and
; non-standard SQL implementations across many databases, it’s not currently
; possible for this feature to be 100% accurate. PHP’s default behavior is to
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
; scheduled for removal in PHP 6.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/magic-quotes-gpc
magic_quotes_gpc = Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
; http://php.net/magic-quotes-runtime
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ‘ with ” instead of \’).
; http://php.net/magic-quotes-sybase
magic_quotes_sybase = Off

; Automatically add files before PHP document.
; http://php.net/auto-prepend-file
auto_prepend_file =

; Automatically add files after PHP document.
; http://php.net/auto-append-file
auto_append_file =

; By default, PHP will output a character encoding using
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP’s built-in default is text/html
; http://php.net/default-mimetype
default_mimetype = “text/html”

; PHP’s default character set is set to empty.
; http://php.net/default-charset
;default_charset = “iso-8859-1″

; Always populate the $HTTP_RAW_POST_DATA variable. PHP’s default behavior is
; to disable this feature.
; http://php.net/always-populate-raw-post-data
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: “/path1:/path2″
;include_path = “.:/php/includes”
;
; Windows: “\path1;\path2″
;include_path = “.;c:\php\includes”
;
; PHP’s default setting for include_path is “.;/path/to/php/pear”
; http://php.net/include-path

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://php.net/doc-root
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
; http://php.net/user-dir
user_dir =

; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
; extension_dir = “./”
; On windows:
; extension_dir = “ext”

; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = Off

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://php.net/cgi.force-redirect
;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP’s default behavior is to disable this feature.
;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://php.net/cgi.redirect-status-env
;cgi.redirect_status_env = ;

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP’s
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1;

; Disable logging through FastCGI connection. PHP’s default behavior is to enable
; this feature.
;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it’s set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://php.net/upload-tmp-dir
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 10M

;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-fopen
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-include
allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP’s default setting
; for this is empty.
; http://php.net/from
;from=”john@doe.com”

; Define the User-Agent string. PHP’s default setting for this is empty.
; http://php.net/user-agent
;user_agent=”PHP”

; Default timeout for socket based streams (seconds)
; http://php.net/default-socket-timeout
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; … or under UNIX:
;
; extension=msql.so
;
; … or with a path:
;
; extension=/path/to/extension/msql.so
;
; If you only provide the name of the extension, PHP will look for it in its
; default extension directory.
;
; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.
;
;extension=php_bz2.dll
;extension=php_curl.dll
;extension=php_dba.dll
;extension=php_exif.dll
;extension=php_fileinfo.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_intl.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_mysql.dll
;extension=php_mysqli.dll
;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
;extension=php_openssl.dll
;extension=php_pdo_firebird.dll
;extension=php_pdo_mssql.dll
;extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
;extension=php_pdo_sqlite.dll
;extension=php_pgsql.dll
;extension=php_phar.dll
;extension=php_pspell.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_soap.dll
;extension=php_sockets.dll
;extension=php_sqlite.dll
;extension=php_sqlite3.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_zip.dll

extension=”zip.so”

extension=”sqlite.so”

extension=”radius.so”

extension=”pgsql.so”

; disabled in XAMPP 1.7.2 because incompatible with PHP 5.3.0
;extension=”dbx.so”

extension=”ming.so”

;extension=”dio.so”

;extension=”interbase.so”

; disabled in XAMPP 1.7.2 because incompatible with PHP 5.3.0
;extension=”eaccelerator.so”
;eaccelerator.shm_size=”16″
;eaccelerator.cache_dir=”/opt/lampp/tmp/eaccelerator”
;eaccelerator.enable=”1″
;eaccelerator.optimizer=”1″
;eaccelerator.check_mtime=”1″
;eaccelerator.debug=”0″
;eaccelerator.filter=”"
;eaccelerator.shm_max=”0″
;eaccelerator.shm_ttl=”0″
;eaccelerator.shm_prune_period=”0″
;eaccelerator.shm_only=”0″
;eaccelerator.compress=”1″
;eaccelerator.compress_level=”9″

;oci8mark

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = Europe/Berlin

; http://php.net/date.default-latitude
;date.default_latitude = 31.7667

; http://php.net/date.default-longitude
;date.default_longitude = 35.2333

; http://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.583333

; http://php.net/date.sunset-zenith
;date.sunset_zenith = 90.583333

[filter]
; http://php.net/filter.default
;filter.default = unsafe_raw

; http://php.net/filter.default-flags
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[intl]
;intl.default_locale =

[sqlite]
; http://php.net/sqlite.assoc-case
;sqlite.assoc_case = 0

[sqlite3]
;sqlite3.extension_dir =

[Pcre]
;PCRE library backtracking limit.
; http://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000

;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
; http://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000

[Pdo]
; Whether to pool ODBC connections. Can be one of “strict”, “relaxed” or “off”
; http://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict

;pdo_odbc.db2_instance_name

[Pdo_mysql]
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/pdo_mysql.cache_size
pdo_mysql.cache_size = 2000

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/pdo_mysql.default-socket
pdo_mysql.default_socket=

[Phar]
; http://php.net/phar.readonly
;phar.readonly = On

; http://php.net/phar.require-hash
;phar.require_hash = On

;phar.cache_list =

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
; http://php.net/define-syslog-variables
define_syslog_variables = Off

[mail function]
; For Win32 only.
; http://php.net/smtp
SMTP = localhost
; http://php.net/smtp-port
smtp_port = 25

; For Win32 only.
; http://php.net/sendmail-from
;sendmail_from = me@example.com

; For Unix only. You may supply arguments as well (default: “sendmail -t -i”).
; http://php.net/sendmail-path
;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
mail.add_x_header = On

; Log all mail() calls including the full path of the script, line #, to address and headers
;mail.log =

[SQL]
; http://php.net/sql.safe-mode
sql.safe_mode = Off

[ODBC]
; http://php.net/odbc.default-db
;odbc.default_db = Not yet implemented

; http://php.net/odbc.default-user
;odbc.default_user = Not yet implemented

; http://php.net/odbc.default-pw
;odbc.default_pw = Not yet implemented

; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype

; Allow or prevent persistent links.
; http://php.net/odbc.allow-persistent
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
; http://php.net/odbc.check-persistent
odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/odbc.max-persistent
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/odbc.max-links
odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
; http://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; http://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1

;birdstep.max_links = -1

[Interbase]
; Allow or prevent persistent links.
ibase.allow_persistent = 1

; Maximum number of persistent links. -1 means no limit.
ibase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
ibase.max_links = -1

; Default database name for ibase_connect().
;ibase.default_db =

; Default username for ibase_connect().
;ibase.default_user =

; Default password for ibase_connect().
;ibase.default_password =

; Default charset for ibase_connect().
;ibase.default_charset =

; Default timestamp format.
ibase.timestampformat = “%Y-%m-%d %H:%M:%S”

; Default date format.
ibase.dateformat = “%Y-%m-%d”

; Default time format.
ibase.timeformat = “%H:%M:%S”

[MySQL]
; Allow accessing, from PHP’s perspective, local files with LOAD DATA statements
; http://php.net/mysql.allow_local_infile
mysql.allow_local_infile = On

; Allow or prevent persistent links.
; http://php.net/mysql.allow-persistent
mysql.allow_persistent = On

; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysql.cache_size
mysql.cache_size = 2000

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysql.max-persistent
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/mysql.max-links
mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysql.default-port
mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysql.default-socket
mysql.default_socket =

; Default host for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysql.default-host
mysql.default_host =

; Default user for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysql.default-user
mysql.default_user =

; Default password for mysql_connect() (doesn’t apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run ‘echo get_cfg_var(“mysql.default_password”)
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysql.default-password
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
; http://php.net/mysql.connect-timeout
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
; http://php.net/mysql.trace-mode
mysql.trace_mode = Off

[MySQLi]

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysqli.max-persistent
mysqli.max_persistent = -1

; Maximum number of links. -1 means no limit.
; http://php.net/mysqli.max-links
mysqli.max_links = -1

; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysqli.cache_size
mysqli.cache_size = 2000

; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysqli.default-port
mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysqli.default-socket
mysqli.default_socket =

; Default host for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysqli.default-host
mysqli.default_host =

; Default user for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysqli.default-user
mysqli.default_user =

; Default password for mysqli_connect() (doesn’t apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run ‘echo get_cfg_var(“mysqli.default_pw”)
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysqli.default-pw
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mysqlnd]
; Enable / Disable collection of general statstics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_statistics
mysqlnd.collect_statistics = On

; Enable / Disable collection of memory usage statstics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_memory_statistics
mysqlnd.collect_memory_statistics = On

; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
; http://php.net/mysqlnd.net_cmd_buffer_size
;mysqlnd.net_cmd_buffer_size = 2048

; Size of a pre-allocated buffer used for reading data sent by the server in
; bytes.
; http://php.net/mysqlnd.net_read_buffer_size
;mysqlnd.net_read_buffer_size = 32768

[OCI8]

; Connection: Enables privileged connections using external
; credentials (OCI_SYSOPER, OCI_SYSDBA)
; http://php.net/oci8.privileged-connect
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
; http://php.net/oci8.max-persistent
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
; http://php.net/oci8.persistent-timeout
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
; http://php.net/oci8.ping-interval
;oci8.ping_interval = 60

; Connection: Set this to a user chosen connection class to be used
; for all pooled server requests with Oracle 11g Database Resident
; Connection Pooling (DRCP). To use DRCP, this value should be set to
; the same string for all web servers running the same application,
; the database pool must be configured, and the connection string must
; specify to use a pooled server.
;oci8.connection_class =

; High Availability: Using On lets PHP receive Fast Application
; Notification (FAN) events generated when a database node fails. The
; database must also be configured to post FAN events.
;oci8.events = Off

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
; http://php.net/oci8.statement-cache-size
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
; http://php.net/oci8.default-prefetch
;oci8.default_prefetch = 100

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
; http://php.net/oci8.old-oci-close-semantics
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
; http://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.
; http://php.net/pgsql.max-persistent
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
; http://php.net/pgsql.max-links
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://php.net/pgsql.log-notice
pgsql.log_notice = 0

[Sybase-CT]
; Allow or prevent persistent links.
; http://php.net/sybct.allow-persistent
sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/sybct.max-persistent
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/sybct.max-links
sybct.max_links = -1

; Minimum server message severity to display.
; http://php.net/sybct.min-server-severity
sybct.min_server_severity = 10

; Minimum client message severity to display.
; http://php.net/sybct.min-client-severity
sybct.min_client_severity = 10

; Set per-context timeout
; http://php.net/sybct.timeout
;sybct.timeout=

;sybct.packet_size

; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
; Default: one minute
;sybct.login_timeout=

; The name of the host you claim to be connecting from, for display by sp_who.
; Default: none
;sybct.hostname=

; Allows you to define how often deadlocks are to be retried. -1 means “forever”.
; Default: 0
;sybct.deadlock_retry_count=

[bcmath]
; Number of decimal digits for all bcmath functions.
; http://php.net/bcmath.scale
bcmath.scale = 0

[browscap]
; http://php.net/browscap
;browscap = extra/browscap.ini

[Session]
; Handler used to store/retrieve data.
; http://php.net/session.save-handler
session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP’s session functions.
;
; The path can be defined as:
;
; session.save_path = “N;/path”
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = “N;MODE;/path”
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process’s umask.
; http://php.net/session.save-path
;session.save_path = “/tmp”

; Whether to use cookies.
; http://php.net/session.use-cookies
session.use_cookies = 1

; http://php.net/session.cookie-secure
;session.cookie_secure =

; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it’s very helpful in combatting
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it’s a good start.
; http://php.net/session.use-only-cookies
session.use_only_cookies = 1

; Name of the session (used as cookie name).
; http://php.net/session.name
session.name = SISFOKOLID

; Initialize session on request startup.
; http://php.net/session.auto-start
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://php.net/session.cookie-lifetime
session.cookie_lifetime = 0

; The path for which the cookie is valid.
; http://php.net/session.cookie-path
session.cookie_path = /

; The domain for which the cookie is valid.
; http://php.net/session.cookie-domain
session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
; http://php.net/session.cookie-httponly
session.cookie_httponly =

; Handler used to serialize data. php is the standard serializer of PHP.
; http://php.net/session.serialize-handler
session.serialize_handler = php

; Defines the probability that the ‘garbage collection’ process is started
; on every session initialization. The probability is calculated by using
; gc_probability/gc_divisor. Where session.gc_probability is the numerator
; and gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.gc-probability
session.gc_probability = 1

; Defines the probability that the ‘garbage collection’ process is started on every
; session initialization. The probability is calculated by using the following equation:
; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
; session.gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request. Increasing this value to 1000 will give you
; a 0.1% chance the gc will run on any give request. For high volume production servers,
; this is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://php.net/session.gc-divisor
session.gc_divisor = 1000

; After this number of seconds, stored data will be seen as ‘garbage’ and
; cleaned up by the garbage collection process.
; http://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, even when register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled. This feature
; introduces some serious security problems if not handled correctly. It’s
; recommended that you do not use this feature on production servers. But you
; should enable this on development servers and enable the warning as well. If you
; do not enable the feature on development servers, you won’t be warned when it’s
; used and debugging errors caused by this can be difficult to track down.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-42
session.bug_compat_42 = On

; This setting controls whether or not you are warned by PHP when initializing a
; session value into the global space. session.bug_compat_42 must be enabled before
; these warnings can be issued by PHP. See the directive above for more information.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-warn
session.bug_compat_warn = On

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://php.net/session.referer-check
session.referer_check =

; How many bytes to read from the file.
; http://php.net/session.entropy-length
session.entropy_length = 0

; Specified here to create the session id.
; http://php.net/session.entropy-file
;session.entropy_file = /dev/urandom
session.entropy_file =

; http://php.net/session.entropy-length
;session.entropy_length = 16

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://php.net/session.cache-limiter
session.cache_limiter = nocache

; Document expires after n minutes.
; http://php.net/session.cache-expire
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; – User may send URL contains active session ID
; to other person via. email/irc/etc.
; – URL that contains active session ID may be stored
; in publically accessible computer.
; – User may access your site with the same session ID
; always using URL stored in browser’s history or bookmarks.
; http://php.net/session.use-trans-sid
session.use_trans_sid = 0

; Select a hash function for use in generating session ids.
; Possible Values
; 0 (MD5 128 bits)
; 1 (SHA-1 160 bits)
; http://php.net/session.hash-function
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, “-”, “,”)
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://php.net/session.hash-bits-per-character
session.hash_bits_per_character = 5

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a “=”, even if no value follows.
; Default Value: “a=href,area=href,frame=src,form=,fieldset=”
; Development Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; Production Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; http://php.net/url-rewriter.tags
url_rewriter.tags = “a=href,area=href,frame=src,input=src,form=fakeentry”

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 – 2147483647. Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 – 2147483647. Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0

; Specify how
on December 27, 2009 at 1:52 pm bytescode

Cuman pengen sharing aja, sapa tahu ada juga yg mencoba sisfokol di Ubuntu (atau distro linux lainnya) :

Saya mencoba sisfokol slta untuk sekolah tempat ayah saya bekerja sbg guru, dimana semua pc, baik client maupun server lokal untuk sisfokol ini, berbasiskan linux, dipilih linux ubuntu jaunty, biar ga menggunakan produk bajakan dan mengajarkan siswa/i ttg produk open source agar tdk menjadi pembajak perangkat lunak (dan penggunanya) kelak.
Dan semua kegiatan berkomputer guru dan siswa/i d sekolah ini dgn ubuntu, mereka sudah biasa, dlm 2-3 hari saja.

Server daemonnya menggunakan server instan xampp (sebenarnya bisa sie menggunakan ubuntu server, cuman cdnya ketinggalan :peace: ). Cukup download, extract : tar -xzvf (nama_file_xampp.tar.gz) -C /opt/

Lalu jalankan dgn : /opt/lampp/lampp start|stop|restart

File sisfokol saya letakkan di /opt/lampp/htdocs/sisfosekolah/
Konfigurasi pd file2 lainnya mengikuti konfigurasi database saya di mysql.
Konfigurasi pd php.ini (gedit /opt/lampp/etc/php.ini) mengikuti yg disarankan ama mas agus muhajir sbb :
==========konfigurasi=========
[PHP]

;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; PHP’s initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP’s behavior.

; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server’s directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the –with-config-file-path compile time option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://php.net/configuration.file

; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from http://www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections

; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* – foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can’t find an expected
; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string (“bar”), or a reference to a
; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:

; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = “None” ; sets foo to the string ‘None’

; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.

; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.

; php.ini-development is very similar to its production variant, except it’s
; much more verbose when it comes to errors. We recommending using the
; development version only in development environments as errors shown to
; application users can inadvertently leak otherwise secure information.

;;;;;;;;;;;;;;;;;;;
; Quick Reference ;
;;;;;;;;;;;;;;;;;;;
; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP’s default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP’s behavior.

; allow_call_time_pass_reference
; Default Value: On
; Development Value: Off
; Production Value: Off

; display_errors
; Default Value: On
; Development Value: On
; Production Value: Off

; display_startup_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; error_reporting
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED

; html_errors
; Default Value: On
; Development Value: On
; Production value: Off

; log_errors
; Default Value: Off
; Development Value: On
; Production Value: On

; magic_quotes_gpc
; Default Value: On
; Development Value: Off
; Production Value: Off

; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)

; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096

; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off

; register_long_arrays
; Default Value: On
; Development Value: Off
; Production Value: Off

; request_order
; Default Value: None
; Development Value: “GP”
; Production Value: “GP”

; session.bug_compat_42
; Default Value: On
; Development Value: On
; Production Value: Off

; session.bug_compat_warn
; Default Value: On
; Development Value: On
; Production Value: Off

; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000

; session.hash_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5

; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off

; track_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; url_rewriter.tags
; Default Value: “a=href,area=href,frame=src,form=,fieldset=”
; Development Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; Production Value: “a=href,area=href,frame=src,input=src,form=fakeentry”

; variables_order
; Default Value: “EGPCS”
; Development Value: “GPCS”
; Production Value: “GPCS”

;;;;;;;;;;;;;;;;;;;;
; php.ini Options ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is “.user.ini”
;user_ini.filename = “.user.ini”

; To disable this feature set this option to empty value
;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine = On

; This directive determines whether or not PHP will recognize code between
; tags as PHP source which should be processed as such. It’s been
; recommended for several years that you not use the short tag “short cut” and
; instead to use the full tag combination. With the wide spread use
; of XML and use of these tags by other languages, the server can become easily
; confused and end up parsing the wrong code in the wrong context. But because
; this short cut has been a feature for such a long time, it’s currently still
; supported for backwards compatibility, but we recommend you don’t use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag = Off
; XAMPP for Linux is currently old fashioned
short_open_tag = On

; Allow ASP-style tags.
; http://php.net/asp-tags
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
; http://php.net/precision
precision = 14

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
; http://php.net/y2k-compliance
y2k_compliance = On

; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application’s output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you’ve already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering = 4096

; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to “mb_output_handler”, character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both “mb_output_handler” with “ob_iconv_handler”
; and you cannot use both “ob_gzhandler” and “zlib.output_compression”.
; Note: output_handler must be empty if this is set ‘On’ !!!!
; Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are ‘off’, ‘on’, or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression = Off

; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = On

; The unserialize callback function will be called (with the undefined class’
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn’t include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; This directive allows you to enable and disable warnings which PHP will issue
; if you pass a value by reference at function call time. Passing values by
; reference at function call time is a deprecated feature which will be removed
; from PHP at some point in the near future. The acceptable method for passing a
; value by reference to a function is by declaring the reference in the functions
; definition, not at call time. This directive does not disable this feature, it
; only determines whether PHP will warn you about it or not. These warnings
; should enabled in development environments only.
; Default Value: On (Suppress warnings)
; Development Value: Off (Issue warnings)
; Production Value: Off (Issue warnings)
; http://php.net/allow-call-time-pass-reference
allow_call_time_pass_reference = Off

; Safe Mode
; http://php.net/safe-mode
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
; http://php.net/safe-mode-gid
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
; http://php.net/safe-mode-include-dir
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
; http://php.net/safe-mode-exec-dir
safe_mode_exec_dir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
; http://php.net/safe-mode-allowed-env-vars
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won’t be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
; http://php.net/safe-mode-protected-env-vars
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/open-basedir
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-functions
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-classes
disable_classes =

; Colors for Syntax Highlighting mode. Anything that’s acceptable in
; would work.
; http://php.net/syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP’s default behavior
; is to disable this feature.
; http://php.net/ignore-user-abort
;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; http://php.net/realpath-cache-size
;realpath_cache_size = 16k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120

;;;;;;;;;;;;;;;;;
; Miscellaneous ;
;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; http://php.net/expose-php
expose_php = On

;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds
; http://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
max_execution_time = 600

; Maximum amount of time each script may spend parsing request data. It’s a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
max_input_time = 600

; Maximum input variable nesting level
; http://php.net/max-input-nesting-level
;max_input_nesting_level = 64

; Maximum amount of memory a script may consume (128MB)
; http://php.net/memory-limit
memory_limit = 64M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn’t be wasting
; resources complaining about best practices and coding standards. That’s what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
;
; Error Level Constants:
; E_ALL – All errors and warnings (includes E_STRICT as of PHP 6.0.0)
; E_ERROR – fatal run-time errors
; E_RECOVERABLE_ERROR – almost fatal run-time errors
; E_WARNING – run-time warnings (non-fatal errors)
; E_PARSE – compile-time parse errors
; E_NOTICE – run-time notices (these are warnings which often result
; from a bug in your code, but it’s possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it’s automatically initialized to an
; empty string)
; E_STRICT – run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR – fatal errors that occur during PHP’s initial startup
; E_CORE_WARNING – warnings (non-fatal errors) that occur during PHP’s
; initial startup
; E_COMPILE_ERROR – fatal compile-time errors
; E_COMPILE_WARNING – compile-time warnings (non-fatal errors)
; E_USER_ERROR – user-generated error message
; E_USER_WARNING – user-generated warning message
; E_USER_NOTICE – user-generated notice message
; E_DEPRECATED – warn about code that will not work in future versions
; of PHP
; E_USER_DEPRECATED – user-generated deprecation warnings
;
; Common Values:
; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED
; http://php.net/error-reporting
error_reporting = E_ALL & ~E_NOTICE

; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; It’s recommended that errors be logged on production servers rather than
; having the errors sent to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-errors
display_errors = Off

; The display of errors which occur during PHP’s startup sequence are handled
; separately from display_errors. PHP’s default behavior is to suppress those
; errors from clients. Turning the display of startup errors on can be useful in
; debugging configuration problems. But, it’s strongly recommended that you
; leave this setting off on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/display-startup-errors
display_startup_errors = On

; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://php.net/log-errors
log_errors = On

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
; http://php.net/log-errors-max-len
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; http://php.net/ignore-repeated-errors
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; http://php.net/ignore-repeated-source
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; http://php.net/report-memleaks
report_memleaks = On

; This setting is on by default.
;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean). Setting this value
; to On can assist in debugging and is appropriate for development servers. It should
; however be disabled on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/track-errors
track_errors = On

; Turn off normal error reporting and emit XML-RPC error XML
; http://php.net/xmlrpc-errors
;xmlrpc_errors = 0

; An XML-RPC faultCode
;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of inserting html
; links to documentation related to that error. This directive controls whether
; those HTML links appear in error messages or not. For performance and security
; reasons, it’s recommended you disable this on production servers.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: On
; Development Value: On
; Production value: Off
; http://php.net/html-errors
html_errors = On

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://php.net/docs
; and change docref_root to the base URL of your local copy including the
; leading ‘/’. You must also specify the file extension being used including
; the dot. PHP’s default behavior is to leave these settings empty.
; Note: Never use this feature for production boxes.
; http://php.net/docref-root
; Examples
;docref_root = “/phpmanual/”

; http://php.net/docref-ext
;docref_ext = .html

; String to output before an error message. PHP’s default behavior is to leave
; this setting blank.
; http://php.net/error-prepend-string
; Example:
;error_prepend_string = “”

; String to output after an error message. PHP’s default behavior is to leave
; this setting blank.
; http://php.net/error-append-string
; Example:
;error_append_string = “”

; Log errors to specified file. PHP’s default behavior is to leave this value
; empty.
; http://php.net/error-log
; Example:
;error_log = php_errors.log
error_log = “/opt/lampp/logs/php_error_log”
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
error_log = syslog

;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;

; Note – track_vars is ALWAYS enabled

; The separator used in PHP generated URLs to separate arguments.
; PHP’s default setting is “&”.
; http://php.net/arg-separator.output
; Example:
;arg_separator.output = “&”

; List of separator(s) used by PHP to parse input URLs into variables.
; PHP’s default setting is “&”.
; NOTE: Every character in this directive is considered as separator!
; http://php.net/arg-separator.input
; Example:
;arg_separator.input = “;&”

; This directive determines which super global arrays are registered when PHP
; starts up. If the register_globals directive is enabled, it also determines
; what order variables are populated into the global space. G,P,C,E & S are
; abbreviations for the following respective super globals: GET, POST, COOKIE,
; ENV and SERVER. There is a performance penalty paid for the registration of
; these arrays and because ENV is not as commonly used as the others, ENV is
; is not recommended on productions servers. You can still get access to
; the environment variables through getenv() should you need to.
; Default Value: “EGPCS”
; Development Value: “GPCS”
; Production Value: “GPCS”;
; http://php.net/variables-order
variables_order = “EGPCS”

; This directive determines which super global data (G,P,C,E & S) should
; be registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive are
; specified in the same manner as the variables_order directive, EXCEPT one.
; Leaving this value empty will cause PHP to use the value set in the
; variables_order directive. It does not mean it will leave the super globals
; array REQUEST empty.
; Default Value: None
; Development Value: “GP”
; Production Value: “GP”
; http://php.net/request-order
request_order = “GP”

; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don’t want to clutter your scripts’ global scope
; with user data. This makes most sense when coupled with track_vars – in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
; http://php.net/register-globals
register_globals = Off

; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
; are registered by PHP or not. As they are deprecated, we obviously don’t
; recommend you use them. They are on by default for compatibility reasons but
; they are not recommended on production servers.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-long-arrays
register_long_arrays = On

; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-argc-argv
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they’re first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
; http://php.net/auto-globals-jit
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
; http://php.net/post-max-size
post_max_size = 8M

; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
; escape any character sequences in GET, POST, COOKIE and ENV data which might
; otherwise corrupt data being placed in resources such as databases before
; making that data available to you. Because of character encoding issues and
; non-standard SQL implementations across many databases, it’s not currently
; possible for this feature to be 100% accurate. PHP’s default behavior is to
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
; scheduled for removal in PHP 6.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/magic-quotes-gpc
magic_quotes_gpc = Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
; http://php.net/magic-quotes-runtime
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ‘ with ” instead of \’).
; http://php.net/magic-quotes-sybase
magic_quotes_sybase = Off

; Automatically add files before PHP document.
; http://php.net/auto-prepend-file
auto_prepend_file =

; Automatically add files after PHP document.
; http://php.net/auto-append-file
auto_append_file =

; By default, PHP will output a character encoding using
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP’s built-in default is text/html
; http://php.net/default-mimetype
default_mimetype = “text/html”

; PHP’s default character set is set to empty.
; http://php.net/default-charset
;default_charset = “iso-8859-1″

; Always populate the $HTTP_RAW_POST_DATA variable. PHP’s default behavior is
; to disable this feature.
; http://php.net/always-populate-raw-post-data
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: “/path1:/path2″
;include_path = “.:/php/includes”
;
; Windows: “\path1;\path2″
;include_path = “.;c:\php\includes”
;
; PHP’s default setting for include_path is “.;/path/to/php/pear”
; http://php.net/include-path

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://php.net/doc-root
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
; http://php.net/user-dir
user_dir =

; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
; extension_dir = “./”
; On windows:
; extension_dir = “ext”

; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = Off

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://php.net/cgi.force-redirect
;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP’s default behavior is to disable this feature.
;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://php.net/cgi.redirect-status-env
;cgi.redirect_status_env = ;

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP’s
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1;

; Disable logging through FastCGI connection. PHP’s default behavior is to enable
; this feature.
;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it’s set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://php.net/upload-tmp-dir
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 10M

;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-fopen
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-include
allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP’s default setting
; for this is empty.
; http://php.net/from
;from=”john@doe.com”

; Define the User-Agent string. PHP’s default setting for this is empty.
; http://php.net/user-agent
;user_agent=”PHP”

; Default timeout for socket based streams (seconds)
; http://php.net/default-socket-timeout
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; … or under UNIX:
;
; extension=msql.so
;
; … or with a path:
;
; extension=/path/to/extension/msql.so
;
; If you only provide the name of the extension, PHP will look for it in its
; default extension directory.
;
; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.
;
;extension=php_bz2.dll
;extension=php_curl.dll
;extension=php_dba.dll
;extension=php_exif.dll
;extension=php_fileinfo.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_intl.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_mysql.dll
;extension=php_mysqli.dll
;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
;extension=php_openssl.dll
;extension=php_pdo_firebird.dll
;extension=php_pdo_mssql.dll
;extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
;extension=php_pdo_sqlite.dll
;extension=php_pgsql.dll
;extension=php_phar.dll
;extension=php_pspell.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_soap.dll
;extension=php_sockets.dll
;extension=php_sqlite.dll
;extension=php_sqlite3.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_zip.dll

extension=”zip.so”

extension=”sqlite.so”

extension=”radius.so”

extension=”pgsql.so”

; disabled in XAMPP 1.7.2 because incompatible with PHP 5.3.0
;extension=”dbx.so”

extension=”ming.so”

;extension=”dio.so”

;extension=”interbase.so”

; disabled in XAMPP 1.7.2 because incompatible with PHP 5.3.0
;extension=”eaccelerator.so”
;eaccelerator.shm_size=”16″
;eaccelerator.cache_dir=”/opt/lampp/tmp/eaccelerator”
;eaccelerator.enable=”1″
;eaccelerator.optimizer=”1″
;eaccelerator.check_mtime=”1″
;eaccelerator.debug=”0″
;eaccelerator.filter=”"
;eaccelerator.shm_max=”0″
;eaccelerator.shm_ttl=”0″
;eaccelerator.shm_prune_period=”0″
;eaccelerator.shm_only=”0″
;eaccelerator.compress=”1″
;eaccelerator.compress_level=”9″

;oci8mark

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = Europe/Berlin

; http://php.net/date.default-latitude
;date.default_latitude = 31.7667

; http://php.net/date.default-longitude
;date.default_longitude = 35.2333

; http://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.583333

; http://php.net/date.sunset-zenith
;date.sunset_zenith = 90.583333

[filter]
; http://php.net/filter.default
;filter.default = unsafe_raw

; http://php.net/filter.default-flags
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[intl]
;intl.default_locale =

[sqlite]
; http://php.net/sqlite.assoc-case
;sqlite.assoc_case = 0

[sqlite3]
;sqlite3.extension_dir =

[Pcre]
;PCRE library backtracking limit.
; http://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000

;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
; http://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000

[Pdo]
; Whether to pool ODBC connections. Can be one of “strict”, “relaxed” or “off”
; http://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict

;pdo_odbc.db2_instance_name

[Pdo_mysql]
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/pdo_mysql.cache_size
pdo_mysql.cache_size = 2000

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/pdo_mysql.default-socket
pdo_mysql.default_socket=

[Phar]
; http://php.net/phar.readonly
;phar.readonly = On

; http://php.net/phar.require-hash
;phar.require_hash = On

;phar.cache_list =

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
; http://php.net/define-syslog-variables
define_syslog_variables = Off

[mail function]
; For Win32 only.
; http://php.net/smtp
SMTP = localhost
; http://php.net/smtp-port
smtp_port = 25

; For Win32 only.
; http://php.net/sendmail-from
;sendmail_from = me@example.com

; For Unix only. You may supply arguments as well (default: “sendmail -t -i”).
; http://php.net/sendmail-path
;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
mail.add_x_header = On

; Log all mail() calls including the full path of the script, line #, to address and headers
;mail.log =

[SQL]
; http://php.net/sql.safe-mode
sql.safe_mode = Off

[ODBC]
; http://php.net/odbc.default-db
;odbc.default_db = Not yet implemented

; http://php.net/odbc.default-user
;odbc.default_user = Not yet implemented

; http://php.net/odbc.default-pw
;odbc.default_pw = Not yet implemented

; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype

; Allow or prevent persistent links.
; http://php.net/odbc.allow-persistent
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
; http://php.net/odbc.check-persistent
odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/odbc.max-persistent
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/odbc.max-links
odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
; http://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; http://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1

;birdstep.max_links = -1

[Interbase]
; Allow or prevent persistent links.
ibase.allow_persistent = 1

; Maximum number of persistent links. -1 means no limit.
ibase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
ibase.max_links = -1

; Default database name for ibase_connect().
;ibase.default_db =

; Default username for ibase_connect().
;ibase.default_user =

; Default password for ibase_connect().
;ibase.default_password =

; Default charset for ibase_connect().
;ibase.default_charset =

; Default timestamp format.
ibase.timestampformat = “%Y-%m-%d %H:%M:%S”

; Default date format.
ibase.dateformat = “%Y-%m-%d”

; Default time format.
ibase.timeformat = “%H:%M:%S”

[MySQL]
; Allow accessing, from PHP’s perspective, local files with LOAD DATA statements
; http://php.net/mysql.allow_local_infile
mysql.allow_local_infile = On

; Allow or prevent persistent links.
; http://php.net/mysql.allow-persistent
mysql.allow_persistent = On

; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysql.cache_size
mysql.cache_size = 2000

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysql.max-persistent
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/mysql.max-links
mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysql.default-port
mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysql.default-socket
mysql.default_socket =

; Default host for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysql.default-host
mysql.default_host =

; Default user for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysql.default-user
mysql.default_user =

; Default password for mysql_connect() (doesn’t apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run ‘echo get_cfg_var(“mysql.default_password”)
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysql.default-password
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
; http://php.net/mysql.connect-timeout
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
; http://php.net/mysql.trace-mode
mysql.trace_mode = Off

[MySQLi]

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysqli.max-persistent
mysqli.max_persistent = -1

; Maximum number of links. -1 means no limit.
; http://php.net/mysqli.max-links
mysqli.max_links = -1

; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysqli.cache_size
mysqli.cache_size = 2000

; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysqli.default-port
mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysqli.default-socket
mysqli.default_socket =

; Default host for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysqli.default-host
mysqli.default_host =

; Default user for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysqli.default-user
mysqli.default_user =

; Default password for mysqli_connect() (doesn’t apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run ‘echo get_cfg_var(“mysqli.default_pw”)
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysqli.default-pw
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mysqlnd]
; Enable / Disable collection of general statstics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_statistics
mysqlnd.collect_statistics = On

; Enable / Disable collection of memory usage statstics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_memory_statistics
mysqlnd.collect_memory_statistics = On

; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
; http://php.net/mysqlnd.net_cmd_buffer_size
;mysqlnd.net_cmd_buffer_size = 2048

; Size of a pre-allocated buffer used for reading data sent by the server in
; bytes.
; http://php.net/mysqlnd.net_read_buffer_size
;mysqlnd.net_read_buffer_size = 32768

[OCI8]

; Connection: Enables privileged connections using external
; credentials (OCI_SYSOPER, OCI_SYSDBA)
; http://php.net/oci8.privileged-connect
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
; http://php.net/oci8.max-persistent
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
; http://php.net/oci8.persistent-timeout
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
; http://php.net/oci8.ping-interval
;oci8.ping_interval = 60

; Connection: Set this to a user chosen connection class to be used
; for all pooled server requests with Oracle 11g Database Resident
; Connection Pooling (DRCP). To use DRCP, this value should be set to
; the same string for all web servers running the same application,
; the database pool must be configured, and the connection string must
; specify to use a pooled server.
;oci8.connection_class =

; High Availability: Using On lets PHP receive Fast Application
; Notification (FAN) events generated when a database node fails. The
; database must also be configured to post FAN events.
;oci8.events = Off

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
; http://php.net/oci8.statement-cache-size
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
; http://php.net/oci8.default-prefetch
;oci8.default_prefetch = 100

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
; http://php.net/oci8.old-oci-close-semantics
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
; http://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.
; http://php.net/pgsql.max-persistent
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
; http://php.net/pgsql.max-links
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://php.net/pgsql.log-notice
pgsql.log_notice = 0

[Sybase-CT]
; Allow or prevent persistent links.
; http://php.net/sybct.allow-persistent
sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/sybct.max-persistent
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/sybct.max-links
sybct.max_links = -1

; Minimum server message severity to display.
; http://php.net/sybct.min-server-severity
sybct.min_server_severity = 10

; Minimum client message severity to display.
; http://php.net/sybct.min-client-severity
sybct.min_client_severity = 10

; Set per-context timeout
; http://php.net/sybct.timeout
;sybct.timeout=

;sybct.packet_size

; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
; Default: one minute
;sybct.login_timeout=

; The name of the host you claim to be connecting from, for display by sp_who.
; Default: none
;sybct.hostname=

; Allows you to define how often deadlocks are to be retried. -1 means “forever”.
; Default: 0
;sybct.deadlock_retry_count=

[bcmath]
; Number of decimal digits for all bcmath functions.
; http://php.net/bcmath.scale
bcmath.scale = 0

[browscap]
; http://php.net/browscap
;browscap = extra/browscap.ini

[Session]
; Handler used to store/retrieve data.
; http://php.net/session.save-handler
session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP’s session functions.
;
; The path can be defined as:
;
; session.save_path = “N;/path”
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = “N;MODE;/path”
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process’s umask.
; http://php.net/session.save-path
;session.save_path = “/tmp”

; Whether to use cookies.
; http://php.net/session.use-cookies
session.use_cookies = 1

; http://php.net/session.cookie-secure
;session.cookie_secure =

; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it’s very helpful in combatting
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it’s a good start.
; http://php.net/session.use-only-cookies
session.use_only_cookies = 1

; Name of the session (used as cookie name).
; http://php.net/session.name
session.name = SISFOKOLID

; Initialize session on request startup.
; http://php.net/session.auto-start
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://php.net/session.cookie-lifetime
session.cookie_lifetime = 0

; The path for which the cookie is valid.
; http://php.net/session.cookie-path
session.cookie_path = /

; The domain for which the cookie is valid.
; http://php.net/session.cookie-domain
session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
; http://php.net/session.cookie-httponly
session.cookie_httponly =

; Handler used to serialize data. php is the standard serializer of PHP.
; http://php.net/session.serialize-handler
session.serialize_handler = php

; Defines the probability that the ‘garbage collection’ process is started
; on every session initialization. The probability is calculated by using
; gc_probability/gc_divisor. Where session.gc_probability is the numerator
; and gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.gc-probability
session.gc_probability = 1

; Defines the probability that the ‘garbage collection’ process is started on every
; session initialization. The probability is calculated by using the following equation:
; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
; session.gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request. Increasing this value to 1000 will give you
; a 0.1% chance the gc will run on any give request. For high volume production servers,
; this is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://php.net/session.gc-divisor
session.gc_divisor = 1000

; After this number of seconds, stored data will be seen as ‘garbage’ and
; cleaned up by the garbage collection process.
; http://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, even when register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled. This feature
; introduces some serious security problems if not handled correctly. It’s
; recommended that you do not use this feature on production servers. But you
; should enable this on development servers and enable the warning as well. If you
; do not enable the feature on development servers, you won’t be warned when it’s
; used and debugging errors caused by this can be difficult to track down.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-42
session.bug_compat_42 = On

; This setting controls whether or not you are warned by PHP when initializing a
; session value into the global space. session.bug_compat_42 must be enabled before
; these warnings can be issued by PHP. See the directive above for more information.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-warn
session.bug_compat_warn = On

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://php.net/session.referer-check
session.referer_check =

; How many bytes to read from the file.
; http://php.net/session.entropy-length
session.entropy_length = 0

; Specified here to create the session id.
; http://php.net/session.entropy-file
;session.entropy_file = /dev/urandom
session.entropy_file =

; http://php.net/session.entropy-length
;session.entropy_length = 16

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://php.net/session.cache-limiter
session.cache_limiter = nocache

; Document expires after n minutes.
; http://php.net/session.cache-expire
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; – User may send URL contains active session ID
; to other person via. email/irc/etc.
; – URL that contains active session ID may be stored
; in publically accessible computer.
; – User may access your site with the same session ID
; always using URL stored in browser’s history or bookmarks.
; http://php.net/session.use-trans-sid
session.use_trans_sid = 0

; Select a hash function for use in generating session ids.
; Possible Values
; 0 (MD5 128 bits)
; 1 (SHA-1 160 bits)
; http://php.net/session.hash-function
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, “-”, “,”)
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://php.net/session.hash-bits-per-character
session.hash_bits_per_character = 5

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a “=”, even if no value follows.
; Default Value: “a=href,area=href,frame=src,form=,fieldset=”
; Development Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; Production Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; http://php.net/url-rewriter.tags
url_rewriter.tags = “a=href,area=href,frame=src,input=src,form=fakeentry”

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 – 2147483647. Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 – 2147483647. Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0

; Specify how
on December 27, 2009 at 1:55 pm bytescode

Cuman pengen sharing aja, sapa tahu ada juga yg mencoba sisfokol di Ubuntu (atau distro linux lainnya) :

Saya mencoba sisfokol slta untuk sekolah tempat ayah saya bekerja sbg guru, dimana semua pc, baik client maupun server lokal untuk sisfokol ini, berbasiskan linux, dipilih linux ubuntu jaunty, biar ga menggunakan produk bajakan dan mengajarkan siswa/i ttg produk open source agar tdk menjadi pembajak perangkat lunak (dan penggunanya) kelak.
Dan semua kegiatan berkomputer guru dan siswa/i d sekolah ini dgn ubuntu, mereka sudah biasa, dlm 2-3 hari saja.

Server daemonnya menggunakan server instan xampp (sebenarnya bisa sie menggunakan ubuntu server, cuman cdnya ketinggalan :peace: ). Cukup download, extract : tar -xzvf (nama_file_xampp.tar.gz) -C /opt/

Lalu jalankan dgn : /opt/lampp/lampp start|stop|restart

File sisfokol saya letakkan di /opt/lampp/htdocs/sisfosekolah/
Konfigurasi pd file2 lainnya mengikuti konfigurasi database saya di mysql.
Konfigurasi pd php.ini (gedit /opt/lampp/etc/php.ini) mengikuti yg disarankan ama mas agus muhajir sbb :
==========konfigurasi=========
[PHP]

;;;;;;;;;;;;;;;;;;;
; About php.ini ;
;;;;;;;;;;;;;;;;;;;
; PHP’s initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP’s behavior.

; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server’s directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the –with-config-file-path compile time option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://php.net/configuration.file

; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from http://www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections

; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* – foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can’t find an expected
; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string (“bar”), or a reference to a
; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:

; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = “None” ; sets foo to the string ‘None’

; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.

; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.

; php.ini-development is very similar to its production variant, except it’s
; much more verbose when it comes to errors. We recommending using the
; development version only in development environments as errors shown to
; application users can inadvertently leak otherwise secure information.

;;;;;;;;;;;;;;;;;;;
; Quick Reference ;
;;;;;;;;;;;;;;;;;;;
; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP’s default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP’s behavior.

; allow_call_time_pass_reference
; Default Value: On
; Development Value: Off
; Production Value: Off

; display_errors
; Default Value: On
; Development Value: On
; Production Value: Off

; display_startup_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; error_reporting
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED

; html_errors
; Default Value: On
; Development Value: On
; Production value: Off

; log_errors
; Default Value: Off
; Development Value: On
; Production Value: On

; magic_quotes_gpc
; Default Value: On
; Development Value: Off
; Production Value: Off

; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)

; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096

; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off

; register_long_arrays
; Default Value: On
; Development Value: Off
; Production Value: Off

; request_order
; Default Value: None
; Development Value: “GP”
; Production Value: “GP”

; session.bug_compat_42
; Default Value: On
; Development Value: On
; Production Value: Off

; session.bug_compat_warn
; Default Value: On
; Development Value: On
; Production Value: Off

; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000

; session.hash_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5

; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off

; track_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; url_rewriter.tags
; Default Value: “a=href,area=href,frame=src,form=,fieldset=”
; Development Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; Production Value: “a=href,area=href,frame=src,input=src,form=fakeentry”

; variables_order
; Default Value: “EGPCS”
; Development Value: “GPCS”
; Production Value: “GPCS”

;;;;;;;;;;;;;;;;;;;;
; php.ini Options ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is “.user.ini”
;user_ini.filename = “.user.ini”

; To disable this feature set this option to empty value
;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine = On

; This directive determines whether or not PHP will recognize code between
; tags as PHP source which should be processed as such. It’s been
; recommended for several years that you not use the short tag “short cut” and
; instead to use the full tag combination. With the wide spread use
; of XML and use of these tags by other languages, the server can become easily
; confused and end up parsing the wrong code in the wrong context. But because
; this short cut has been a feature for such a long time, it’s currently still
; supported for backwards compatibility, but we recommend you don’t use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag = Off
; XAMPP for Linux is currently old fashioned
short_open_tag = On

; Allow ASP-style tags.
; http://php.net/asp-tags
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
; http://php.net/precision
precision = 14

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
; http://php.net/y2k-compliance
y2k_compliance = On

; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application’s output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you’ve already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering = 4096

; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to “mb_output_handler”, character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both “mb_output_handler” with “ob_iconv_handler”
; and you cannot use both “ob_gzhandler” and “zlib.output_compression”.
; Note: output_handler must be empty if this is set ‘On’ !!!!
; Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are ‘off’, ‘on’, or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression = Off

; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = On

; The unserialize callback function will be called (with the undefined class’
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn’t include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; This directive allows you to enable and disable warnings which PHP will issue
; if you pass a value by reference at function call time. Passing values by
; reference at function call time is a deprecated feature which will be removed
; from PHP at some point in the near future. The acceptable method for passing a
; value by reference to a function is by declaring the reference in the functions
; definition, not at call time. This directive does not disable this feature, it
; only determines whether PHP will warn you about it or not. These warnings
; should enabled in development environments only.
; Default Value: On (Suppress warnings)
; Development Value: Off (Issue warnings)
; Production Value: Off (Issue warnings)
; http://php.net/allow-call-time-pass-reference
allow_call_time_pass_reference = Off

; Safe Mode
; http://php.net/safe-mode
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
; http://php.net/safe-mode-gid
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
; http://php.net/safe-mode-include-dir
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
; http://php.net/safe-mode-exec-dir
safe_mode_exec_dir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
; http://php.net/safe-mode-allowed-env-vars
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won’t be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
; http://php.net/safe-mode-protected-env-vars
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/open-basedir
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-functions
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-classes
disable_classes =

; Colors for Syntax Highlighting mode. Anything that’s acceptable in
; would work.
; http://php.net/syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP’s default behavior
; is to disable this feature.
; http://php.net/ignore-user-abort
;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; http://php.net/realpath-cache-size
;realpath_cache_size = 16k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120

;;;;;;;;;;;;;;;;;
; Miscellaneous ;
;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; http://php.net/expose-php
expose_php = On

;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds
; http://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
max_execution_time = 600

; Maximum amount of time each script may spend parsing request data. It’s a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
max_input_time = 600

; Maximum input variable nesting level
; http://php.net/max-input-nesting-level
;max_input_nesting_level = 64

; Maximum amount of memory a script may consume (128MB)
; http://php.net/memory-limit
memory_limit = 64M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn’t be wasting
; resources complaining about best practices and coding standards. That’s what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
;
; Error Level Constants:
; E_ALL – All errors and warnings (includes E_STRICT as of PHP 6.0.0)
; E_ERROR – fatal run-time errors
; E_RECOVERABLE_ERROR – almost fatal run-time errors
; E_WARNING – run-time warnings (non-fatal errors)
; E_PARSE – compile-time parse errors
; E_NOTICE – run-time notices (these are warnings which often result
; from a bug in your code, but it’s possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it’s automatically initialized to an
; empty string)
; E_STRICT – run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR – fatal errors that occur during PHP’s initial startup
; E_CORE_WARNING – warnings (non-fatal errors) that occur during PHP’s
; initial startup
; E_COMPILE_ERROR – fatal compile-time errors
; E_COMPILE_WARNING – compile-time warnings (non-fatal errors)
; E_USER_ERROR – user-generated error message
; E_USER_WARNING – user-generated warning message
; E_USER_NOTICE – user-generated notice message
; E_DEPRECATED – warn about code that will not work in future versions
; of PHP
; E_USER_DEPRECATED – user-generated deprecation warnings
;
; Common Values:
; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED
; http://php.net/error-reporting
error_reporting = E_ALL & ~E_NOTICE

; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; It’s recommended that errors be logged on production servers rather than
; having the errors sent to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-errors
display_errors = Off

; The display of errors which occur during PHP’s startup sequence are handled
; separately from display_errors. PHP’s default behavior is to suppress those
; errors from clients. Turning the display of startup errors on can be useful in
; debugging configuration problems. But, it’s strongly recommended that you
; leave this setting off on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/display-startup-errors
display_startup_errors = On

; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://php.net/log-errors
log_errors = On

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
; http://php.net/log-errors-max-len
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; http://php.net/ignore-repeated-errors
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; http://php.net/ignore-repeated-source
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; http://php.net/report-memleaks
report_memleaks = On

; This setting is on by default.
;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean). Setting this value
; to On can assist in debugging and is appropriate for development servers. It should
; however be disabled on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/track-errors
track_errors = On

; Turn off normal error reporting and emit XML-RPC error XML
; http://php.net/xmlrpc-errors
;xmlrpc_errors = 0

; An XML-RPC faultCode
;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of inserting html
; links to documentation related to that error. This directive controls whether
; those HTML links appear in error messages or not. For performance and security
; reasons, it’s recommended you disable this on production servers.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: On
; Development Value: On
; Production value: Off
; http://php.net/html-errors
html_errors = On

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://php.net/docs
; and change docref_root to the base URL of your local copy including the
; leading ‘/’. You must also specify the file extension being used including
; the dot. PHP’s default behavior is to leave these settings empty.
; Note: Never use this feature for production boxes.
; http://php.net/docref-root
; Examples
;docref_root = “/phpmanual/”

; http://php.net/docref-ext
;docref_ext = .html

; String to output before an error message. PHP’s default behavior is to leave
; this setting blank.
; http://php.net/error-prepend-string
; Example:
;error_prepend_string = “”

; String to output after an error message. PHP’s default behavior is to leave
; this setting blank.
; http://php.net/error-append-string
; Example:
;error_append_string = “”

; Log errors to specified file. PHP’s default behavior is to leave this value
; empty.
; http://php.net/error-log
; Example:
;error_log = php_errors.log
error_log = “/opt/lampp/logs/php_error_log”
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
error_log = syslog

;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;

; Note – track_vars is ALWAYS enabled

; The separator used in PHP generated URLs to separate arguments.
; PHP’s default setting is “&”.
; http://php.net/arg-separator.output
; Example:
;arg_separator.output = “&”

; List of separator(s) used by PHP to parse input URLs into variables.
; PHP’s default setting is “&”.
; NOTE: Every character in this directive is considered as separator!
; http://php.net/arg-separator.input
; Example:
;arg_separator.input = “;&”

; This directive determines which super global arrays are registered when PHP
; starts up. If the register_globals directive is enabled, it also determines
; what order variables are populated into the global space. G,P,C,E & S are
; abbreviations for the following respective super globals: GET, POST, COOKIE,
; ENV and SERVER. There is a performance penalty paid for the registration of
; these arrays and because ENV is not as commonly used as the others, ENV is
; is not recommended on productions servers. You can still get access to
; the environment variables through getenv() should you need to.
; Default Value: “EGPCS”
; Development Value: “GPCS”
; Production Value: “GPCS”;
; http://php.net/variables-order
variables_order = “EGPCS”

; This directive determines which super global data (G,P,C,E & S) should
; be registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive are
; specified in the same manner as the variables_order directive, EXCEPT one.
; Leaving this value empty will cause PHP to use the value set in the
; variables_order directive. It does not mean it will leave the super globals
; array REQUEST empty.
; Default Value: None
; Development Value: “GP”
; Production Value: “GP”
; http://php.net/request-order
request_order = “GP”

; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don’t want to clutter your scripts’ global scope
; with user data. This makes most sense when coupled with track_vars – in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
; http://php.net/register-globals
register_globals = Off

; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
; are registered by PHP or not. As they are deprecated, we obviously don’t
; recommend you use them. They are on by default for compatibility reasons but
; they are not recommended on production servers.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-long-arrays
register_long_arrays = On

; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-argc-argv
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they’re first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
; http://php.net/auto-globals-jit
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
; http://php.net/post-max-size
post_max_size = 8M

; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
; escape any character sequences in GET, POST, COOKIE and ENV data which might
; otherwise corrupt data being placed in resources such as databases before
; making that data available to you. Because of character encoding issues and
; non-standard SQL implementations across many databases, it’s not currently
; possible for this feature to be 100% accurate. PHP’s default behavior is to
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
; scheduled for removal in PHP 6.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/magic-quotes-gpc
magic_quotes_gpc = Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
; http://php.net/magic-quotes-runtime
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ‘ with ” instead of \’).
; http://php.net/magic-quotes-sybase
magic_quotes_sybase = Off

; Automatically add files before PHP document.
; http://php.net/auto-prepend-file
auto_prepend_file =

; Automatically add files after PHP document.
; http://php.net/auto-append-file
auto_append_file =

; By default, PHP will output a character encoding using
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP’s built-in default is text/html
; http://php.net/default-mimetype
default_mimetype = “text/html”

; PHP’s default character set is set to empty.
; http://php.net/default-charset
;default_charset = “iso-8859-1″

; Always populate the $HTTP_RAW_POST_DATA variable. PHP’s default behavior is
; to disable this feature.
; http://php.net/always-populate-raw-post-data
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: “/path1:/path2″
;include_path = “.:/php/includes”
;
; Windows: “\path1;\path2″
;include_path = “.;c:\php\includes”
;
; PHP’s default setting for include_path is “.;/path/to/php/pear”
; http://php.net/include-path

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://php.net/doc-root
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
; http://php.net/user-dir
user_dir =

; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
; extension_dir = “./”
; On windows:
; extension_dir = “ext”

; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = Off

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://php.net/cgi.force-redirect
;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP’s default behavior is to disable this feature.
;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://php.net/cgi.redirect-status-env
;cgi.redirect_status_env = ;

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP’s
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1;

; Disable logging through FastCGI connection. PHP’s default behavior is to enable
; this feature.
;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it’s set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://php.net/upload-tmp-dir
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 10M

;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-fopen
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-include
allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP’s default setting
; for this is empty.
; http://php.net/from
;from=”john@doe.com”

; Define the User-Agent string. PHP’s default setting for this is empty.
; http://php.net/user-agent
;user_agent=”PHP”

; Default timeout for socket based streams (seconds)
; http://php.net/default-socket-timeout
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; … or under UNIX:
;
; extension=msql.so
;
; … or with a path:
;
; extension=/path/to/extension/msql.so
;
; If you only provide the name of the extension, PHP will look for it in its
; default extension directory.
;
; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.
;
;extension=php_bz2.dll
;extension=php_curl.dll
;extension=php_dba.dll
;extension=php_exif.dll
;extension=php_fileinfo.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_intl.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_mysql.dll
;extension=php_mysqli.dll
;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
;extension=php_openssl.dll
;extension=php_pdo_firebird.dll
;extension=php_pdo_mssql.dll
;extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
;extension=php_pdo_sqlite.dll
;extension=php_pgsql.dll
;extension=php_phar.dll
;extension=php_pspell.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_soap.dll
;extension=php_sockets.dll
;extension=php_sqlite.dll
;extension=php_sqlite3.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_zip.dll

extension=”zip.so”

extension=”sqlite.so”

extension=”radius.so”

extension=”pgsql.so”

; disabled in XAMPP 1.7.2 because incompatible with PHP 5.3.0
;extension=”dbx.so”

extension=”ming.so”

;extension=”dio.so”

;extension=”interbase.so”

; disabled in XAMPP 1.7.2 because incompatible with PHP 5.3.0
;extension=”eaccelerator.so”
;eaccelerator.shm_size=”16″
;eaccelerator.cache_dir=”/opt/lampp/tmp/eaccelerator”
;eaccelerator.enable=”1″
;eaccelerator.optimizer=”1″
;eaccelerator.check_mtime=”1″
;eaccelerator.debug=”0″
;eaccelerator.filter=”"
;eaccelerator.shm_max=”0″
;eaccelerator.shm_ttl=”0″
;eaccelerator.shm_prune_period=”0″
;eaccelerator.shm_only=”0″
;eaccelerator.compress=”1″
;eaccelerator.compress_level=”9″

;oci8mark

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = Europe/Berlin

; http://php.net/date.default-latitude
;date.default_latitude = 31.7667

; http://php.net/date.default-longitude
;date.default_longitude = 35.2333

; http://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.583333

; http://php.net/date.sunset-zenith
;date.sunset_zenith = 90.583333

[filter]
; http://php.net/filter.default
;filter.default = unsafe_raw

; http://php.net/filter.default-flags
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[intl]
;intl.default_locale =

[sqlite]
; http://php.net/sqlite.assoc-case
;sqlite.assoc_case = 0

[sqlite3]
;sqlite3.extension_dir =

[Pcre]
;PCRE library backtracking limit.
; http://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000

;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
; http://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000

[Pdo]
; Whether to pool ODBC connections. Can be one of “strict”, “relaxed” or “off”
; http://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict

;pdo_odbc.db2_instance_name

[Pdo_mysql]
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/pdo_mysql.cache_size
pdo_mysql.cache_size = 2000

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/pdo_mysql.default-socket
pdo_mysql.default_socket=

[Phar]
; http://php.net/phar.readonly
;phar.readonly = On

; http://php.net/phar.require-hash
;phar.require_hash = On

;phar.cache_list =

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
; http://php.net/define-syslog-variables
define_syslog_variables = Off

[mail function]
; For Win32 only.
; http://php.net/smtp
SMTP = localhost
; http://php.net/smtp-port
smtp_port = 25

; For Win32 only.
; http://php.net/sendmail-from
;sendmail_from = me@example.com

; For Unix only. You may supply arguments as well (default: “sendmail -t -i”).
; http://php.net/sendmail-path
;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
mail.add_x_header = On

; Log all mail() calls including the full path of the script, line #, to address and headers
;mail.log =

[SQL]
; http://php.net/sql.safe-mode
sql.safe_mode = Off

[ODBC]
; http://php.net/odbc.default-db
;odbc.default_db = Not yet implemented

; http://php.net/odbc.default-user
;odbc.default_user = Not yet implemented

; http://php.net/odbc.default-pw
;odbc.default_pw = Not yet implemented

; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype

; Allow or prevent persistent links.
; http://php.net/odbc.allow-persistent
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
; http://php.net/odbc.check-persistent
odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/odbc.max-persistent
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/odbc.max-links
odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
; http://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; http://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1

;birdstep.max_links = -1

[Interbase]
; Allow or prevent persistent links.
ibase.allow_persistent = 1

; Maximum number of persistent links. -1 means no limit.
ibase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
ibase.max_links = -1

; Default database name for ibase_connect().
;ibase.default_db =

; Default username for ibase_connect().
;ibase.default_user =

; Default password for ibase_connect().
;ibase.default_password =

; Default charset for ibase_connect().
;ibase.default_charset =

; Default timestamp format.
ibase.timestampformat = “%Y-%m-%d %H:%M:%S”

; Default date format.
ibase.dateformat = “%Y-%m-%d”

; Default time format.
ibase.timeformat = “%H:%M:%S”

[MySQL]
; Allow accessing, from PHP’s perspective, local files with LOAD DATA statements
; http://php.net/mysql.allow_local_infile
mysql.allow_local_infile = On

; Allow or prevent persistent links.
; http://php.net/mysql.allow-persistent
mysql.allow_persistent = On

; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysql.cache_size
mysql.cache_size = 2000

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysql.max-persistent
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/mysql.max-links
mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysql.default-port
mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysql.default-socket
mysql.default_socket =

; Default host for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysql.default-host
mysql.default_host =

; Default user for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysql.default-user
mysql.default_user =

; Default password for mysql_connect() (doesn’t apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run ‘echo get_cfg_var(“mysql.default_password”)
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysql.default-password
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
; http://php.net/mysql.connect-timeout
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
; http://php.net/mysql.trace-mode
mysql.trace_mode = Off

[MySQLi]

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysqli.max-persistent
mysqli.max_persistent = -1

; Maximum number of links. -1 means no limit.
; http://php.net/mysqli.max-links
mysqli.max_links = -1

; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysqli.cache_size
mysqli.cache_size = 2000

; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysqli.default-port
mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysqli.default-socket
mysqli.default_socket =

; Default host for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysqli.default-host
mysqli.default_host =

; Default user for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysqli.default-user
mysqli.default_user =

; Default password for mysqli_connect() (doesn’t apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run ‘echo get_cfg_var(“mysqli.default_pw”)
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysqli.default-pw
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mysqlnd]
; Enable / Disable collection of general statstics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_statistics
mysqlnd.collect_statistics = On

; Enable / Disable collection of memory usage statstics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_memory_statistics
mysqlnd.collect_memory_statistics = On

; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
; http://php.net/mysqlnd.net_cmd_buffer_size
;mysqlnd.net_cmd_buffer_size = 2048

; Size of a pre-allocated buffer used for reading data sent by the server in
; bytes.
; http://php.net/mysqlnd.net_read_buffer_size
;mysqlnd.net_read_buffer_size = 32768

[OCI8]

; Connection: Enables privileged connections using external
; credentials (OCI_SYSOPER, OCI_SYSDBA)
; http://php.net/oci8.privileged-connect
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
; http://php.net/oci8.max-persistent
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
; http://php.net/oci8.persistent-timeout
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
; http://php.net/oci8.ping-interval
;oci8.ping_interval = 60

; Connection: Set this to a user chosen connection class to be used
; for all pooled server requests with Oracle 11g Database Resident
; Connection Pooling (DRCP). To use DRCP, this value should be set to
; the same string for all web servers running the same application,
; the database pool must be configured, and the connection string must
; specify to use a pooled server.
;oci8.connection_class =

; High Availability: Using On lets PHP receive Fast Application
; Notification (FAN) events generated when a database node fails. The
; database must also be configured to post FAN events.
;oci8.events = Off

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
; http://php.net/oci8.statement-cache-size
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
; http://php.net/oci8.default-prefetch
;oci8.default_prefetch = 100

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
; http://php.net/oci8.old-oci-close-semantics
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
; http://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.
; http://php.net/pgsql.max-persistent
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
; http://php.net/pgsql.max-links
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://php.net/pgsql.log-notice
pgsql.log_notice = 0

[Sybase-CT]
; Allow or prevent persistent links.
; http://php.net/sybct.allow-persistent
sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/sybct.max-persistent
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/sybct.max-links
sybct.max_links = -1

; Minimum server message severity to display.
; http://php.net/sybct.min-server-severity
sybct.min_server_severity = 10

; Minimum client message severity to display.
; http://php.net/sybct.min-client-severity
sybct.min_client_severity = 10

; Set per-context timeout
; http://php.net/sybct.timeout
;sybct.timeout=

;sybct.packet_size

; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
; Default: one minute
;sybct.login_timeout=

; The name of the host you claim to be connecting from, for display by sp_who.
; Default: none
;sybct.hostname=

; Allows you to define how often deadlocks are to be retried. -1 means “forever”.
; Default: 0
;sybct.deadlock_retry_count=

[bcmath]
; Number of decimal digits for all bcmath functions.
; http://php.net/bcmath.scale
bcmath.scale = 0

[browscap]
; http://php.net/browscap
;browscap = extra/browscap.ini

[Session]
; Handler used to store/retrieve data.
; http://php.net/session.save-handler
session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP’s session functions.
;
; The path can be defined as:
;
; session.save_path = “N;/path”
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = “N;MODE;/path”
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process’s umask.
; http://php.net/session.save-path
;session.save_path = “/tmp”

; Whether to use cookies.
; http://php.net/session.use-cookies
session.use_cookies = 1

; http://php.net/session.cookie-secure
;session.cookie_secure =

; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it’s very helpful in combatting
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it’s a good start.
; http://php.net/session.use-only-cookies
session.use_only_cookies = 1

; Name of the session (used as cookie name).
; http://php.net/session.name
session.name = SISFOKOLID

; Initialize session on request startup.
; http://php.net/session.auto-start
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://php.net/session.cookie-lifetime
session.cookie_lifetime = 0

; The path for which the cookie is valid.
; http://php.net/session.cookie-path
session.cookie_path = /

; The domain for which the cookie is valid.
; http://php.net/session.cookie-domain
session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
; http://php.net/session.cookie-httponly
session.cookie_httponly =

; Handler used to serialize data. php is the standard serializer of PHP.
; http://php.net/session.serialize-handler
session.serialize_handler = php

; Defines the probability that the ‘garbage collection’ process is started
; on every session initialization. The probability is calculated by using
; gc_probability/gc_divisor. Where session.gc_probability is the numerator
; and gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.gc-probability
session.gc_probability = 1

; Defines the probability that the ‘garbage collection’ process is started on every
; session initialization. The probability is calculated by using the following equation:
; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
; session.gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request. Increasing this value to 1000 will give you
; a 0.1% chance the gc will run on any give request. For high volume production servers,
; this is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://php.net/session.gc-divisor
session.gc_divisor = 1000

; After this number of seconds, stored data will be seen as ‘garbage’ and
; cleaned up by the garbage collection process.
; http://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, even when register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled. This feature
; introduces some serious security problems if not handled correctly. It’s
; recommended that you do not use this feature on production servers. But you
; should enable this on development servers and enable the warning as well. If you
; do not enable the feature on development servers, you won’t be warned when it’s
; used and debugging errors caused by this can be difficult to track down.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-42
session.bug_compat_42 = On

; This setting controls whether or not you are warned by PHP when initializing a
; session value into the global space. session.bug_compat_42 must be enabled before
; these warnings can be issued by PHP. See the directive above for more information.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-warn
session.bug_compat_warn = On

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://php.net/session.referer-check
session.referer_check =

; How many bytes to read from the file.
; http://php.net/session.entropy-length
session.entropy_length = 0

; Specified here to create the session id.
; http://php.net/session.entropy-file
;session.entropy_file = /dev/urandom
session.entropy_file =

; http://php.net/session.entropy-length
;session.entropy_length = 16

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://php.net/session.cache-limiter
session.cache_limiter = nocache

; Document expires after n minutes.
; http://php.net/session.cache-expire
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; – User may send URL contains active session ID
; to other person via. email/irc/etc.
; – URL that contains active session ID may be stored
; in publically accessible computer.
; – User may access your site with the same session ID
; always using URL stored in browser’s history or bookmarks.
; http://php.net/session.use-trans-sid
session.use_trans_sid = 0

; Select a hash function for use in generating session ids.
; Possible Values
; 0 (MD5 128 bits)
; 1 (SHA-1 160 bits)
; http://php.net/session.hash-function
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, “-”, “,”)
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://php.net/session.hash-bits-per-character
session.hash_bits_per_character = 5

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a “=”, even if no value follows.
; Default Value: “a=href,area=href,frame=src,form=,fieldset=”
; Development Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; Production Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; http://php.net/url-rewriter.tags
url_rewriter.tags = “a=href,area=href,frame=src,input=src,form=fakeentry”

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 – 2147483647. Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 – 2147483647. Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0

; Specify how
on December 30, 2009 at 11:10 am bytescode

Saya sudah mencoba di Ubuntu Jaunty dan bisa berjalan dgn baik, menggunakan server xampp, untuk intranet sekolah.

Ini konfigurasi di php.ini (gedit /opt/lampp/etc/php.ini)
=============
[PHP]

; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server’s directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the –with-config-file-path compile time option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://php.net/configuration.file

; The syntax of the file is extremely simple. Whitespace and Lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from http://www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections

; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* – foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can’t find an expected
; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string (“bar”), or a reference to a
; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:

; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = “None” ; sets foo to the string ‘None’

; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.

;;;;;;;;;;;;;;;;;;;
; About this file ;
;;;;;;;;;;;;;;;;;;;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.

; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.

; php.ini-development is very similar to its production variant, except it’s
; much more verbose when it comes to errors. We recommending using the
; development version only in development environments as errors shown to
; application users can inadvertently leak otherwise secure information.

;;;;;;;;;;;;;;;;;;;
; Quick Reference ;
;;;;;;;;;;;;;;;;;;;
; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP’s default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP’s behavior.

; allow_call_time_pass_reference
; Default Value: On
; Development Value: Off
; Production Value: Off

; display_errors
; Default Value: On
; Development Value: On
; Production Value: Off

; display_startup_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; error_reporting
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED

; html_errors
; Default Value: On
; Development Value: On
; Production value: Off

; log_errors
; Default Value: Off
; Development Value: On
; Production Value: On

; magic_quotes_gpc
; Default Value: On
; Development Value: Off
; Production Value: Off

; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)

; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096

; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off

; register_long_arrays
; Default Value: On
; Development Value: Off
; Production Value: Off

; request_order
; Default Value: None
; Development Value: “GP”
; Production Value: “GP”

; session.bug_compat_42
; Default Value: On
; Development Value: On
; Production Value: Off

; session.bug_compat_warn
; Default Value: On
; Development Value: On
; Production Value: Off

; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000

; session.hash_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5

; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off

; track_errors
; Default Value: Off
; Development Value: On
; Production Value: Off

; url_rewriter.tags
; Default Value: “a=href,area=href,frame=src,form=,fieldset=”
; Development Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; Production Value: “a=href,area=href,frame=src,input=src,form=fakeentry”

; variables_order
; Default Value: “EGPCS”
; Development Value: “GPCS”
; Production Value: “GPCS”

;;;;;;;;;;;;;;;;;;;;
; php.ini Options ;
;;;;;;;;;;;;;;;;;;;;
; Name for user-defined php.ini (.htaccess) files. Default is “.user.ini”
;user_ini.filename = “.user.ini”

; To disable this feature set this option to empty value
;user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;
; Language Options ;
;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine = On

; This directive determines whether or not PHP will recognize code between
; tags as PHP source which should be processed as such. It’s been
; recommended for several years that you not use the short tag “short cut” and
; instead to use the full tag combination. With the wide spread use
; of XML and use of these tags by other languages, the server can become easily
; confused and end up parsing the wrong code in the wrong context. But because
; this short cut has been a feature for such a long time, it’s currently still
; supported for backwards compatibility, but we recommend you don’t use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag = Off
; XAMPP for Linux is currently old fashioned
short_open_tag = On

; Allow ASP-style tags.
; http://php.net/asp-tags
asp_tags = Off

; The number of significant digits displayed in floating point numbers.
; http://php.net/precision
precision = 14

; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
; http://php.net/y2k-compliance
y2k_compliance = On

; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application’s output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you’ve already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering = 4096

; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to “mb_output_handler”, character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both “mb_output_handler” with “ob_iconv_handler”
; and you cannot use both “ob_gzhandler” and “zlib.output_compression”.
; Note: output_handler must be empty if this is set ‘On’ !!!!
; Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =

; Transparent output compression using the zlib library
; Valid values for this option are ‘off’, ‘on’, or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression = Off

; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = On

; The unserialize callback function will be called (with the undefined class’
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn’t include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =

; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 100

; This directive allows you to enable and disable warnings which PHP will issue
; if you pass a value by reference at function call time. Passing values by
; reference at function call time is a deprecated feature which will be removed
; from PHP at some point in the near future. The acceptable method for passing a
; value by reference to a function is by declaring the reference in the functions
; definition, not at call time. This directive does not disable this feature, it
; only determines whether PHP will warn you about it or not. These warnings
; should enabled in development environments only.
; Default Value: On (Suppress warnings)
; Development Value: Off (Issue warnings)
; Production Value: Off (Issue warnings)
; http://php.net/allow-call-time-pass-reference
allow_call_time_pass_reference = Off

; Safe Mode
; http://php.net/safe-mode
safe_mode = Off

; By default, Safe Mode does a UID compare check when
; opening files. If you want to relax this to a GID compare,
; then turn on safe_mode_gid.
; http://php.net/safe-mode-gid
safe_mode_gid = Off

; When safe_mode is on, UID/GID checks are bypassed when
; including files from this directory and its subdirectories.
; (directory must also be in include_path or full path must
; be used when including)
; http://php.net/safe-mode-include-dir
safe_mode_include_dir =

; When safe_mode is on, only executables located in the safe_mode_exec_dir
; will be allowed to be executed via the exec family of functions.
; http://php.net/safe-mode-exec-dir
safe_mode_exec_dir =

; Setting certain environment variables may be a potential security breach.
; This directive contains a comma-delimited list of prefixes. In Safe Mode,
; the user may only alter environment variables whose names begin with the
; prefixes supplied here. By default, users will only be able to set
; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
; Note: If this directive is empty, PHP will let the user modify ANY
; environment variable!
; http://php.net/safe-mode-allowed-env-vars
safe_mode_allowed_env_vars = PHP_

; This directive contains a comma-delimited list of environment variables that
; the end user won’t be able to change using putenv(). These variables will be
; protected even if safe_mode_allowed_env_vars is set to allow to change them.
; http://php.net/safe-mode-protected-env-vars
safe_mode_protected_env_vars = LD_LIBRARY_PATH

; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/open-basedir
;open_basedir =

; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-functions
disable_functions =

; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-classes
disable_classes =

; Colors for Syntax Highlighting mode. Anything that’s acceptable in
; would work.
; http://php.net/syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.bg = #FFFFFF
;highlight.default = #0000BB
;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP’s default behavior
; is to disable this feature.
; http://php.net/ignore-user-abort
;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; http://php.net/realpath-cache-size
;realpath_cache_size = 16k

; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120

;;;;;;;;;;;;;;;;;
; Miscellaneous ;
;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; http://php.net/expose-php
expose_php = On

;;;;;;;;;;;;;;;;;;;
; Resource Limits ;
;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds
; http://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
max_execution_time = 600

; Maximum amount of time each script may spend parsing request data. It’s a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
max_input_time = 600

; Maximum input variable nesting level
; http://php.net/max-input-nesting-level
;max_input_nesting_level = 64

; Maximum amount of memory a script may consume (128MB)
; http://php.net/memory-limit
memory_limit = 64M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Error handling and logging ;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn’t be wasting
; resources complaining about best practices and coding standards. That’s what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL | E_STRICT. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
;
; Error Level Constants:
; E_ALL – All errors and warnings (includes E_STRICT as of PHP 6.0.0)
; E_ERROR – fatal run-time errors
; E_RECOVERABLE_ERROR – almost fatal run-time errors
; E_WARNING – run-time warnings (non-fatal errors)
; E_PARSE – compile-time parse errors
; E_NOTICE – run-time notices (these are warnings which often result
; from a bug in your code, but it’s possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it’s automatically initialized to an
; empty string)
; E_STRICT – run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR – fatal errors that occur during PHP’s initial startup
; E_CORE_WARNING – warnings (non-fatal errors) that occur during PHP’s
; initial startup
; E_COMPILE_ERROR – fatal compile-time errors
; E_COMPILE_WARNING – compile-time warnings (non-fatal errors)
; E_USER_ERROR – user-generated error message
; E_USER_WARNING – user-generated warning message
; E_USER_NOTICE – user-generated notice message
; E_DEPRECATED – warn about code that will not work in future versions
; of PHP
; E_USER_DEPRECATED – user-generated deprecation warnings
;
; Common Values:
; E_ALL & ~E_NOTICE (Show all errors, except for notices and coding standards warnings.)
; E_ALL & ~E_NOTICE | E_STRICT (Show all errors, except for notices)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
; E_ALL | E_STRICT (Show all errors, warnings and notices including coding standards.)
; Default Value: E_ALL & ~E_NOTICE
; Development Value: E_ALL | E_STRICT
; Production Value: E_ALL & ~E_DEPRECATED
; http://php.net/error-reporting
error_reporting = E_ALL & ~E_NOTICE

; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; It’s recommended that errors be logged on production servers rather than
; having the errors sent to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-errors
display_errors = Off

; The display of errors which occur during PHP’s startup sequence are handled
; separately from display_errors. PHP’s default behavior is to suppress those
; errors from clients. Turning the display of startup errors on can be useful in
; debugging configuration problems. But, it’s strongly recommended that you
; leave this setting off on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/display-startup-errors
display_startup_errors = On

; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://php.net/log-errors
log_errors = On

; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
; http://php.net/log-errors-max-len
log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; http://php.net/ignore-repeated-errors
ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; http://php.net/ignore-repeated-source
ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; http://php.net/report-memleaks
report_memleaks = On

; This setting is on by default.
;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean). Setting this value
; to On can assist in debugging and is appropriate for development servers. It should
; however be disabled on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/track-errors
track_errors = On

; Turn off normal error reporting and emit XML-RPC error XML
; http://php.net/xmlrpc-errors
;xmlrpc_errors = 0

; An XML-RPC faultCode
;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of inserting html
; links to documentation related to that error. This directive controls whether
; those HTML links appear in error messages or not. For performance and security
; reasons, it’s recommended you disable this on production servers.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: On
; Development Value: On
; Production value: Off
; http://php.net/html-errors
html_errors = On

; If html_errors is set On PHP produces clickable error messages that direct
; to a page describing the error or function causing the error in detail.
; You can download a copy of the PHP manual from http://php.net/docs
; and change docref_root to the base URL of your local copy including the
; leading ‘/’. You must also specify the file extension being used including
; the dot. PHP’s default behavior is to leave these settings empty.
; Note: Never use this feature for production boxes.
; http://php.net/docref-root
; Examples
;docref_root = “/phpmanual/”

; http://php.net/docref-ext
;docref_ext = .html

; String to output before an error message. PHP’s default behavior is to leave
; this setting blank.
; http://php.net/error-prepend-string
; Example:
;error_prepend_string = “”

; String to output after an error message. PHP’s default behavior is to leave
; this setting blank.
; http://php.net/error-append-string
; Example:
;error_append_string = “”

; Log errors to specified file. PHP’s default behavior is to leave this value
; empty.
; http://php.net/error-log
; Example:
;error_log = php_errors.log
error_log = “/opt/lampp/logs/php_error_log”
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
error_log = syslog

;;;;;;;;;;;;;;;;;
; Data Handling ;
;;;;;;;;;;;;;;;;;

; Note – track_vars is ALWAYS enabled

; The separator used in PHP generated URLs to separate arguments.
; PHP’s default setting is “&”.
; http://php.net/arg-separator.output
; Example:
;arg_separator.output = “&”

; List of separator(s) used by PHP to parse input URLs into variables.
; PHP’s default setting is “&”.
; NOTE: Every character in this directive is considered as separator!
; http://php.net/arg-separator.input
; Example:
;arg_separator.input = “;&”

; This directive determines which super global arrays are registered when PHP
; starts up. If the register_globals directive is enabled, it also determines
; what order variables are populated into the global space. G,P,C,E & S are
; abbreviations for the following respective super globals: GET, POST, COOKIE,
; ENV and SERVER. There is a performance penalty paid for the registration of
; these arrays and because ENV is not as commonly used as the others, ENV is
; is not recommended on productions servers. You can still get access to
; the environment variables through getenv() should you need to.
; Default Value: “EGPCS”
; Development Value: “GPCS”
; Production Value: “GPCS”;
; http://php.net/variables-order
variables_order = “EGPCS”

; This directive determines which super global data (G,P,C,E & S) should
; be registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive are
; specified in the same manner as the variables_order directive, EXCEPT one.
; Leaving this value empty will cause PHP to use the value set in the
; variables_order directive. It does not mean it will leave the super globals
; array REQUEST empty.
; Default Value: None
; Development Value: “GP”
; Production Value: “GP”
; http://php.net/request-order
request_order = “GP”

; Whether or not to register the EGPCS variables as global variables. You may
; want to turn this off if you don’t want to clutter your scripts’ global scope
; with user data. This makes most sense when coupled with track_vars – in which
; case you can access all of the GPC variables through the $HTTP_*_VARS[],
; variables.
; You should do your best to write your scripts so that they do not require
; register_globals to be on; Using form variables as globals can easily lead
; to possible security problems, if the code is not very well thought of.
; http://php.net/register-globals
register_globals = Off

; Determines whether the deprecated long $HTTP_*_VARS type predefined variables
; are registered by PHP or not. As they are deprecated, we obviously don’t
; recommend you use them. They are on by default for compatibility reasons but
; they are not recommended on production servers.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-long-arrays
register_long_arrays = On

; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-argc-argv
register_argc_argv = On

; When enabled, the SERVER and ENV variables are created when they’re first
; used (Just In Time) instead of when the script starts. If these variables
; are not used within a script, having this directive on will result in a
; performance gain. The PHP directives register_globals, register_long_arrays,
; and register_argc_argv must be disabled for this directive to have any affect.
; http://php.net/auto-globals-jit
auto_globals_jit = On

; Maximum size of POST data that PHP will accept.
; http://php.net/post-max-size
post_max_size = 8M

; Magic quotes are a preprocessing feature of PHP where PHP will attempt to
; escape any character sequences in GET, POST, COOKIE and ENV data which might
; otherwise corrupt data being placed in resources such as databases before
; making that data available to you. Because of character encoding issues and
; non-standard SQL implementations across many databases, it’s not currently
; possible for this feature to be 100% accurate. PHP’s default behavior is to
; enable the feature. We strongly recommend you use the escaping mechanisms
; designed specifically for the database your using instead of relying on this
; feature. Also note, this feature has been deprecated as of PHP 5.3.0 and is
; scheduled for removal in PHP 6.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/magic-quotes-gpc
magic_quotes_gpc = Off

; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
; http://php.net/magic-quotes-runtime
magic_quotes_runtime = Off

; Use Sybase-style magic quotes (escape ‘ with ” instead of \’).
; http://php.net/magic-quotes-sybase
magic_quotes_sybase = Off

; Automatically add files before PHP document.
; http://php.net/auto-prepend-file
auto_prepend_file =

; Automatically add files after PHP document.
; http://php.net/auto-append-file
auto_append_file =

; By default, PHP will output a character encoding using
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
;
; PHP’s built-in default is text/html
; http://php.net/default-mimetype
default_mimetype = “text/html”

; PHP’s default character set is set to empty.
; http://php.net/default-charset
;default_charset = “iso-8859-1″

; Always populate the $HTTP_RAW_POST_DATA variable. PHP’s default behavior is
; to disable this feature.
; http://php.net/always-populate-raw-post-data
;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;

; UNIX: “/path1:/path2″
;include_path = “.:/php/includes”
;
; Windows: “\path1;\path2″
;include_path = “.;c:\php\includes”
;
; PHP’s default setting for include_path is “.;/path/to/php/pear”
; http://php.net/include-path

; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://php.net/doc-root
doc_root =

; The directory under which PHP opens the script using /~username used only
; if nonempty.
; http://php.net/user-dir
user_dir =

; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
; extension_dir = “./”
; On windows:
; extension_dir = “ext”

; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = Off

; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://php.net/cgi.force-redirect
;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP’s default behavior is to disable this feature.
;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://php.net/cgi.redirect-status-env
;cgi.redirect_status_env = ;

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP’s
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1;

; Disable logging through FastCGI connection. PHP’s default behavior is to enable
; this feature.
;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it’s set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0

;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://php.net/upload-tmp-dir
;upload_tmp_dir =

; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 10M

;;;;;;;;;;;;;;;;;;
; Fopen wrappers ;
;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-fopen
allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-include
allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP’s default setting
; for this is empty.
; http://php.net/from
;from=”john@doe.com”

; Define the User-Agent string. PHP’s default setting for this is empty.
; http://php.net/user-agent
;user_agent=”PHP”

; Default timeout for socket based streams (seconds)
; http://php.net/default-socket-timeout
default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;
; Dynamic Extensions ;
;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the following
; syntax:
;
; extension=modulename.extension
;
; For example, on Windows:
;
; extension=msql.dll
;
; … or under UNIX:
;
; extension=msql.so
;
; … or with a path:
;
; extension=/path/to/extension/msql.so
;
; If you only provide the name of the extension, PHP will look for it in its
; default extension directory.
;
; Windows Extensions
; Note that ODBC support is built in, so no dll is needed for it.
; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5)
; extension folders as well as the separate PECL DLL download (PHP 5).
; Be sure to appropriately set the extension_dir directive.
;
;extension=php_bz2.dll
;extension=php_curl.dll
;extension=php_dba.dll
;extension=php_exif.dll
;extension=php_fileinfo.dll
;extension=php_gd2.dll
;extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_intl.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_ldap.dll
;extension=php_mbstring.dll
;extension=php_ming.dll
;extension=php_mssql.dll
;extension=php_mysql.dll
;extension=php_mysqli.dll
;extension=php_oci8.dll ; Use with Oracle 10gR2 Instant Client
;extension=php_oci8_11g.dll ; Use with Oracle 11g Instant Client
;extension=php_openssl.dll
;extension=php_pdo_firebird.dll
;extension=php_pdo_mssql.dll
;extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
;extension=php_pdo_sqlite.dll
;extension=php_pgsql.dll
;extension=php_phar.dll
;extension=php_pspell.dll
;extension=php_shmop.dll
;extension=php_snmp.dll
;extension=php_soap.dll
;extension=php_sockets.dll
;extension=php_sqlite.dll
;extension=php_sqlite3.dll
;extension=php_sybase_ct.dll
;extension=php_tidy.dll
;extension=php_xmlrpc.dll
;extension=php_xsl.dll
;extension=php_zip.dll

extension=”zip.so”

extension=”sqlite.so”

extension=”radius.so”

extension=”pgsql.so”

; disabled in XAMPP 1.7.2 because incompatible with PHP 5.3.0
;extension=”dbx.so”

extension=”ming.so”

;extension=”dio.so”

;extension=”interbase.so”

; disabled in XAMPP 1.7.2 because incompatible with PHP 5.3.0
;extension=”eaccelerator.so”
;eaccelerator.shm_size=”16″
;eaccelerator.cache_dir=”/opt/lampp/tmp/eaccelerator”
;eaccelerator.enable=”1″
;eaccelerator.optimizer=”1″
;eaccelerator.check_mtime=”1″
;eaccelerator.debug=”0″
;eaccelerator.filter=”"
;eaccelerator.shm_max=”0″
;eaccelerator.shm_ttl=”0″
;eaccelerator.shm_prune_period=”0″
;eaccelerator.shm_only=”0″
;eaccelerator.compress=”1″
;eaccelerator.compress_level=”9″

;oci8mark

;;;;;;;;;;;;;;;;;;;
; Module Settings ;
;;;;;;;;;;;;;;;;;;;

[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = Europe/Berlin

; http://php.net/date.default-latitude
;date.default_latitude = 31.7667

; http://php.net/date.default-longitude
;date.default_longitude = 35.2333

; http://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.583333

; http://php.net/date.sunset-zenith
;date.sunset_zenith = 90.583333

[filter]
; http://php.net/filter.default
;filter.default = unsafe_raw

; http://php.net/filter.default-flags
;filter.default_flags =

[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1

[intl]
;intl.default_locale =

[sqlite]
; http://php.net/sqlite.assoc-case
;sqlite.assoc_case = 0

[sqlite3]
;sqlite3.extension_dir =

[Pcre]
;PCRE library backtracking limit.
; http://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000

;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
; http://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000

[Pdo]
; Whether to pool ODBC connections. Can be one of “strict”, “relaxed” or “off”
; http://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict

;pdo_odbc.db2_instance_name

[Pdo_mysql]
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/pdo_mysql.cache_size
pdo_mysql.cache_size = 2000

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/pdo_mysql.default-socket
pdo_mysql.default_socket=

[Phar]
; http://php.net/phar.readonly
;phar.readonly = On

; http://php.net/phar.require-hash
;phar.require_hash = On

;phar.cache_list =

[Syslog]
; Whether or not to define the various syslog variables (e.g. $LOG_PID,
; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
; runtime, you can define these variables by calling define_syslog_variables().
; http://php.net/define-syslog-variables
define_syslog_variables = Off

[mail function]
; For Win32 only.
; http://php.net/smtp
SMTP = localhost
; http://php.net/smtp-port
smtp_port = 25

; For Win32 only.
; http://php.net/sendmail-from
;sendmail_from = me@example.com

; For Unix only. You may supply arguments as well (default: “sendmail -t -i”).
; http://php.net/sendmail-path
;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
mail.add_x_header = On

; Log all mail() calls including the full path of the script, line #, to address and headers
;mail.log =

[SQL]
; http://php.net/sql.safe-mode
sql.safe_mode = Off

[ODBC]
; http://php.net/odbc.default-db
;odbc.default_db = Not yet implemented

; http://php.net/odbc.default-user
;odbc.default_user = Not yet implemented

; http://php.net/odbc.default-pw
;odbc.default_pw = Not yet implemented

; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype

; Allow or prevent persistent links.
; http://php.net/odbc.allow-persistent
odbc.allow_persistent = On

; Check that a connection is still valid before reuse.
; http://php.net/odbc.check-persistent
odbc.check_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/odbc.max-persistent
odbc.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/odbc.max-links
odbc.max_links = -1

; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
; http://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096

; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; http://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1

;birdstep.max_links = -1

[Interbase]
; Allow or prevent persistent links.
ibase.allow_persistent = 1

; Maximum number of persistent links. -1 means no limit.
ibase.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
ibase.max_links = -1

; Default database name for ibase_connect().
;ibase.default_db =

; Default username for ibase_connect().
;ibase.default_user =

; Default password for ibase_connect().
;ibase.default_password =

; Default charset for ibase_connect().
;ibase.default_charset =

; Default timestamp format.
ibase.timestampformat = “%Y-%m-%d %H:%M:%S”

; Default date format.
ibase.dateformat = “%Y-%m-%d”

; Default time format.
ibase.timeformat = “%H:%M:%S”

[MySQL]
; Allow accessing, from PHP’s perspective, local files with LOAD DATA statements
; http://php.net/mysql.allow_local_infile
mysql.allow_local_infile = On

; Allow or prevent persistent links.
; http://php.net/mysql.allow-persistent
mysql.allow_persistent = On

; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysql.cache_size
mysql.cache_size = 2000

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysql.max-persistent
mysql.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/mysql.max-links
mysql.max_links = -1

; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysql.default-port
mysql.default_port =

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysql.default-socket
mysql.default_socket =

; Default host for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysql.default-host
mysql.default_host =

; Default user for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysql.default-user
mysql.default_user =

; Default password for mysql_connect() (doesn’t apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run ‘echo get_cfg_var(“mysql.default_password”)
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysql.default-password
mysql.default_password =

; Maximum time (in seconds) for connect timeout. -1 means no limit
; http://php.net/mysql.connect-timeout
mysql.connect_timeout = 60

; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
; http://php.net/mysql.trace-mode
mysql.trace_mode = Off

[MySQLi]

; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysqli.max-persistent
mysqli.max_persistent = -1

; Maximum number of links. -1 means no limit.
; http://php.net/mysqli.max-links
mysqli.max_links = -1

; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysqli.cache_size
mysqli.cache_size = 2000

; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysqli.default-port
mysqli.default_port = 3306

; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysqli.default-socket
mysqli.default_socket =

; Default host for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysqli.default-host
mysqli.default_host =

; Default user for mysql_connect() (doesn’t apply in safe mode).
; http://php.net/mysqli.default-user
mysqli.default_user =

; Default password for mysqli_connect() (doesn’t apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run ‘echo get_cfg_var(“mysqli.default_pw”)
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysqli.default-pw
mysqli.default_pw =

; Allow or prevent reconnect
mysqli.reconnect = Off

[mysqlnd]
; Enable / Disable collection of general statstics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_statistics
mysqlnd.collect_statistics = On

; Enable / Disable collection of memory usage statstics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_memory_statistics
mysqlnd.collect_memory_statistics = On

; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
; http://php.net/mysqlnd.net_cmd_buffer_size
;mysqlnd.net_cmd_buffer_size = 2048

; Size of a pre-allocated buffer used for reading data sent by the server in
; bytes.
; http://php.net/mysqlnd.net_read_buffer_size
;mysqlnd.net_read_buffer_size = 32768

[OCI8]

; Connection: Enables privileged connections using external
; credentials (OCI_SYSOPER, OCI_SYSDBA)
; http://php.net/oci8.privileged-connect
;oci8.privileged_connect = Off

; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
; http://php.net/oci8.max-persistent
;oci8.max_persistent = -1

; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
; http://php.net/oci8.persistent-timeout
;oci8.persistent_timeout = -1

; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
; http://php.net/oci8.ping-interval
;oci8.ping_interval = 60

; Connection: Set this to a user chosen connection class to be used
; for all pooled server requests with Oracle 11g Database Resident
; Connection Pooling (DRCP). To use DRCP, this value should be set to
; the same string for all web servers running the same application,
; the database pool must be configured, and the connection string must
; specify to use a pooled server.
;oci8.connection_class =

; High Availability: Using On lets PHP receive Fast Application
; Notification (FAN) events generated when a database node fails. The
; database must also be configured to post FAN events.
;oci8.events = Off

; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
; http://php.net/oci8.statement-cache-size
;oci8.statement_cache_size = 20

; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
; http://php.net/oci8.default-prefetch
;oci8.default_prefetch = 100

; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
; http://php.net/oci8.old-oci-close-semantics
;oci8.old_oci_close_semantics = Off

[PostgresSQL]
; Allow or prevent persistent links.
; http://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On

; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off

; Maximum number of persistent links. -1 means no limit.
; http://php.net/pgsql.max-persistent
pgsql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
; http://php.net/pgsql.max-links
pgsql.max_links = -1

; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0

; Log PostgreSQL backends Noitce message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://php.net/pgsql.log-notice
pgsql.log_notice = 0

[Sybase-CT]
; Allow or prevent persistent links.
; http://php.net/sybct.allow-persistent
sybct.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
; http://php.net/sybct.max-persistent
sybct.max_persistent = -1

; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/sybct.max-links
sybct.max_links = -1

; Minimum server message severity to display.
; http://php.net/sybct.min-server-severity
sybct.min_server_severity = 10

; Minimum client message severity to display.
; http://php.net/sybct.min-client-severity
sybct.min_client_severity = 10

; Set per-context timeout
; http://php.net/sybct.timeout
;sybct.timeout=

;sybct.packet_size

; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
; Default: one minute
;sybct.login_timeout=

; The name of the host you claim to be connecting from, for display by sp_who.
; Default: none
;sybct.hostname=

; Allows you to define how often deadlocks are to be retried. -1 means “forever”.
; Default: 0
;sybct.deadlock_retry_count=

[bcmath]
; Number of decimal digits for all bcmath functions.
; http://php.net/bcmath.scale
bcmath.scale = 0

[browscap]
; http://php.net/browscap
;browscap = extra/browscap.ini

[Session]
; Handler used to store/retrieve data.
; http://php.net/session.save-handler
session.save_handler = files

; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP’s session functions.
;
; The path can be defined as:
;
; session.save_path = “N;/path”
;
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
;
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
;
; The file storage module creates files using mode 600 by default.
; You can change that by using
;
; session.save_path = “N;MODE;/path”
;
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process’s umask.
; http://php.net/session.save-path
;session.save_path = “/tmp”

; Whether to use cookies.
; http://php.net/session.use-cookies
session.use_cookies = 1

; http://php.net/session.cookie-secure
;session.cookie_secure =

; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it’s very helpful in combatting
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it’s a good start.
; http://php.net/session.use-only-cookies
session.use_only_cookies = 1

; Name of the session (used as cookie name).
; http://php.net/session.name
session.name = SISFOKOLID

; Initialize session on request startup.
; http://php.net/session.auto-start
session.auto_start = 0

; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://php.net/session.cookie-lifetime
session.cookie_lifetime = 0

; The path for which the cookie is valid.
; http://php.net/session.cookie-path
session.cookie_path = /

; The domain for which the cookie is valid.
; http://php.net/session.cookie-domain
session.cookie_domain =

; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
; http://php.net/session.cookie-httponly
session.cookie_httponly =

; Handler used to serialize data. php is the standard serializer of PHP.
; http://php.net/session.serialize-handler
session.serialize_handler = php

; Defines the probability that the ‘garbage collection’ process is started
; on every session initialization. The probability is calculated by using
; gc_probability/gc_divisor. Where session.gc_probability is the numerator
; and gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.gc-probability
session.gc_probability = 1

; Defines the probability that the ‘garbage collection’ process is started on every
; session initialization. The probability is calculated by using the following equation:
; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
; session.gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request. Increasing this value to 1000 will give you
; a 0.1% chance the gc will run on any give request. For high volume production servers,
; this is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://php.net/session.gc-divisor
session.gc_divisor = 1000

; After this number of seconds, stored data will be seen as ‘garbage’ and
; cleaned up by the garbage collection process.
; http://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440

; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; cd /path/to/sessions; find -cmin +24 | xargs rm

; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope, even when register_globals
; is disabled. PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled. This feature
; introduces some serious security problems if not handled correctly. It’s
; recommended that you do not use this feature on production servers. But you
; should enable this on development servers and enable the warning as well. If you
; do not enable the feature on development servers, you won’t be warned when it’s
; used and debugging errors caused by this can be difficult to track down.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-42
session.bug_compat_42 = On

; This setting controls whether or not you are warned by PHP when initializing a
; session value into the global space. session.bug_compat_42 must be enabled before
; these warnings can be issued by PHP. See the directive above for more information.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-warn
session.bug_compat_warn = On

; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://php.net/session.referer-check
session.referer_check =

; How many bytes to read from the file.
; http://php.net/session.entropy-length
session.entropy_length = 0

; Specified here to create the session id.
; http://php.net/session.entropy-file
;session.entropy_file = /dev/urandom
session.entropy_file =

; http://php.net/session.entropy-length
;session.entropy_length = 16

; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://php.net/session.cache-limiter
session.cache_limiter = nocache

; Document expires after n minutes.
; http://php.net/session.cache-expire
session.cache_expire = 180

; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; – User may send URL contains active session ID
; to other person via. email/irc/etc.
; – URL that contains active session ID may be stored
; in publically accessible computer.
; – User may access your site with the same session ID
; always using URL stored in browser’s history or bookmarks.
; http://php.net/session.use-trans-sid
session.use_trans_sid = 0

; Select a hash function for use in generating session ids.
; Possible Values
; 0 (MD5 128 bits)
; 1 (SHA-1 160 bits)
; http://php.net/session.hash-function
session.hash_function = 0

; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, “-”, “,”)
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://php.net/session.hash-bits-per-character
session.hash_bits_per_character = 5

; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a “=”, even if no value follows.
; Default Value: “a=href,area=href,frame=src,form=,fieldset=”
; Development Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; Production Value: “a=href,area=href,frame=src,input=src,form=fakeentry”
; http://php.net/url-rewriter.tags
url_rewriter.tags = “a=href,area=href,frame=src,input=src,form=fakeentry”

[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On

; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1

; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1

; Minimum error severity to display.
mssql.min_error_severity = 10

; Minimum message severity to display.
mssql.min_message_severity = 10

; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off

; Connect timeout
;mssql.connect_timeout = 5

; Query timeout
;mssql.timeout = 60

; Valid range 0 – 2147483647. Default = 4096.
;mssql.textlimit = 4096

; Valid range 0 – 2147483647. Default = 4096.
;mssql.textsize = 4096

; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0

; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On

; Use NT authentication when connecting to the server
mssql.secure_connection = Off

; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1

; Specify client character set.
; If empty or not set the client charset from freetds.comf is used
; This is only used when compiled with FreeTDS
;mssql.charset = “ISO-8859-1″

[Assertion]
; Assert(expr); active by default.
; http://php.net/assert.active
;assert.active = On

; Issue a PHP warning for each failed assertion.
; http://php.net/assert.warning
;assert.warning = On

; Don’t bail out by default.
; http://php.net/assert.bail
;assert.bail = Off

; User-function to be called if an assertion fails.
; http://php.net/assert.callback
;assert.callback = 0

; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval()
on January 4, 2010 at 5:31 pm budi

hmm dah lama sebenarnya nyari sistem informasi untuk sekolah saya… akhirnya baru ketemu sekarang. Untuk instalasi sisfokol ini (sy install yang sisfosma) semua proses extrak dan install sql berjalan dengan lancar, tetapi setelah dijalanin pada server (ubuntu 7.10, apache 2, php 5.3, mysql 5) muncul permasalahan yaitu proses login tidak dapat dilaksanakan (mungkin ada masalah dengan register global kalo membaca posting diatas), setelah diutak atik cukup lama akhirnya jadi (meski ngodingnya hampir semaput, soalnya ga mau ngubah setting default php.ini). Setelah diinstall akhirnya webnya berjalan dengan baik.

btw ada yang mo saya tanyakan ni mas (hehe sori kepanjangan preface-nya):

seandainya saya ingin memodifikasi web tersebut (baik tampilan layout, maupun kode programnya) kemudian mendistribusikan secara free ke komunitas (umumnya) dan sekolah (khususnya) apakah sy harus membayar lisensi kepada author utama untuk kasus ini…

makasih atas responnya…
on January 5, 2010 at 12:23 pm Abdul Adhim

Syukron alias terima kasih aku coba dulu ya …. !
on January 5, 2010 at 3:38 pm Abdul Adhim

Saya sudah install dan berhasil, tapi ketika login kok gak bisa masuk, emang sudah di uji coba ta?
on January 6, 2010 at 7:32 am sisfokol

@bytescode :
thanks sarannya…
good luck jg.

jangan lupa, dalam waktu dekat ini, pertengahan bulan januari 2010 ini, akan aq rilis SISFOKOL v3.0 .

@abdul adhim :
thanks telah coba karya saya.
semua solusi permasalahan tentang setting dan konfigurasi, dibahas disini semua.

SISFOKOL v2.0 itu rilis pada pertengahan tahun 2008.
jelas telah melalui proses uji coba.
silahkan dicoba lagi aja…

@budi :
thanks masukannya, dan telah coba karya saya ini.
anda bisa membuat turunan atau remaster dari SISFOKOL ini, dengan gabungan karya dan ide anda sendiri.
tidak ada namanya lisensi disini. yang ada hanyalah layanan donasi dan kastumisasi . . . ;-D .

enjoy aja.
met berjuang.
on January 8, 2010 at 6:00 pm tech

pengguna baru nihhh.. login pada SISFOSD, cara loginnya gmana…??? MOHON petenjuk makasih sebelumnya..
on January 12, 2010 at 3:03 am sisfokol

@tech :
dalam paket file sisfokol, ada petunjuk contoh login ke sistem-nya.
silahkan dicoba.
on January 12, 2010 at 9:21 pm jankis

Mas saya baru coba install di server lokal dengn XAMPP 1.7.2 pas saya login ke Tata Usaha dan mengklik Akademik>>Data Siswa>> muncul Erorr Warning: mysql_num_rows(): supplied argument is not a valid MySQL result resource in C:\xampp\htdocs\sis-smp1cijambe\admtu\akad\siswa.php on line 373
Kenapa Ya Mas?? Mohon Pencerahannya.
Sebelumnya Terimakasih.
on January 12, 2010 at 9:21 pm jankis

Mas, saya Pake SISFOKOL SLTP v.2.0
on January 14, 2010 at 5:59 pm jankis

Mas, Sorry nich aq minta pencerahannya, dalam SISFOKOL V.3.0 tidak bisa Ganti Password Kepala Sekolah.
on January 15, 2010 at 2:34 pm jankis

Mas, Saya mau Pesan Pesan SISFOKOL yang V.3.0 tapi setelah dicoba masih ada Bugs, pada saat mau ganti Password Kepala Sekolah dan Tatausaha tidak bisa..!!! Mohon Mas kasih tahu Errornya dimana?? Nanti saya ajukan ke Kepala Sekolah Saya utk menjadi Donasi di SISFOKOL
Trima Kasih..
on January 17, 2010 at 12:14 pm d33_hadi

Terima kasih banyak Mas, Saya memang sedang belajar PHP dan menemukan contoh aplikasi yang bagus…
Maju terus, pantang mundur
on January 18, 2010 at 9:01 am sisfokol

@jankis :
silahkan download lagi aja. . .
semoga bs optimal. . .;-D

@d33_hadi :
thanks telah coba karya saya.
smg bs bermanfaat.
on January 20, 2010 at 5:23 am jankis

Mas, Maaf..saya sudah Download lagi Sisfokol V.3. Tapi pada saat di Extract Error. knp ya Mas,??
on January 20, 2010 at 7:46 am nazman

mat siang mas, dan rekan-rekan semua

saya mohon pencerahan tentang trik membuat struktur organisasi yang dinamis pada php.

kasusnya seperti ini:
1. untuk strukturnya dapat di edit dan ditambah
2. pada setiap posisi struktur organisasinya bisa ditampilkan sekaligus nama, jabatan dan fotonya
3. jika di klik pada foto dapat menampilkan identitas Curiculu vitae nya masing-masing
4. struktur dapat di cetak dan bila struktur telah berobah orang-orangnya, maka data struktur yang lama masih dapat ditampilkan dalam format priview untuk dicetak tanpa harus mengganggu terhadap struktur yang baru.

terimah kasih mas dan rekan semua…
mohon bantuan banget… saya lagi dpt tugas nich..
on January 23, 2010 at 7:57 am sisfokol

@jankis :
silahkan coba file kompresi lainnya…
saat sebelum aq upload, gak ada yg masalah.

@nazman :
saya rasa cukup mudah.
yg perlu anda siapkan adalah tentang : penambahan data, edit data, upload foto, hapus data, dan print browser.
on January 23, 2010 at 8:14 am Agungdal

Terima kasih atas softwarenya..
saya tertarik mencoba sisfokol 2.0 untuk SMK. tetapi pada saat masuk ada masalah
Warning: date() [function.date]: It is not safe to rely on the system’s timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected ‘Asia/Krasnoyarsk’ for ’7.0/no DST’ instead in C:\xampp\htdocs\source\inc\fungsi.php on line 1196

trus bagaimana solusinya yah. saya pake server XAMPP
Terima kasih.
on January 28, 2010 at 2:24 am surya

maaf ni mas mengganggu…
coba aplikasi sisfokol dikasih petunjuk dlm format pdf…
masalahnya saya masih g ngerti caranya mas..
maklum mas mash dlm pembelajaran ni….

mas ya mas…
masih awam ni..

petunjuknya kirim ke email ya mas…
dilagak@yahoo.com
on January 28, 2010 at 2:26 am surya

oh ya saya minta petunjuk sifokol yg smp mas….
on January 29, 2010 at 1:01 am Nazman

makasih mas, trus kira-kira gimana contohnya mas? untuk penambahan data, edit data, upload foto, hapus data, dan print browser. pada struktur organisasi tersebut ?? saya masih bingung mas?? trims sebelumnya.
on January 30, 2010 at 9:38 am sisfokol

@Agungdal :
thanks telah coba karya saya.
harusnya pake XAMPP, bisa lho…
mungkin ini masalah timezone atau format tanggal yang tidak lazim dari sistem operasi anda.

saat sisfokol v2.0 dan v3.0 dibuat, menggunakan XAMPP versi 1.6 .

@surya :
ebook buku pedoman utk sisfokol versi free, sedang aq buat.
mungkin minggu depan, bisa usai.
ntar akan aq pasang di milist sisfokol.

@nazman :
oh….
aq belum punya contoh coding-nya…
coba googling aja ya…
on February 18, 2010 at 7:50 pm caks

penambahan guru2 untuk kelas V da VI, knapa gag bisa yah ? ada pencerahan ?
on February 20, 2010 at 10:54 am sisfokol

@caks :
untuk sisfokol sd ya..?

harusnya bisa.

silahkan kirim screenshot-nya. . .
on March 9, 2010 at 1:10 am hajir

assalamualaikum….
saya baru download nih versi 3 tapi sprtinya ada perbedaan dari versi 2 tetantang adanya halaman instalasi pertanyaan saya :

1. mohon pencerahan harus diisi apa tentang Host Database :…. Nama Database:….. Username Database:…… Password Database :….. “kalo bsa di kasih contoh pengisiannya biar jelas…”

2. ada manual booknya nggak…. kita mau download nih…

terimaksih mohon maaf ni orang awam banget saya pake windows dan pake xampp yang seperti anda sarankan yang terbaru…

wassalamuaikum….

salam dari ujung selatan jawa….
BANTUR
on March 9, 2010 at 11:28 am sisfokol

@hajir :
www.

halo…

nama yang sama ya . . ;-D

iya nih, versi 3.0, banyak yang berbeda.

1. ini hanyalah konfigurasi untuk koneksi database ke mysql-server yang anda miliki.

misalkan :
*host : localhost
*database : sisfokolku
*user : root
*pass :

contoh juga ada pada daftar komentar diatas, pada kanal download ini.

2. saya rasa, referensi pada blog ini, lumayan lengkap lho.
sedangkan untuk ebook, hanya ada dalam paket cd donatur, yang disertakan juga sisfokol versi donasi.

semoga bisa berhasil.

selamat mencoba.

wassalam.
on March 14, 2010 at 7:53 pm Software Aplikasi MIS Sekolah open source « It's about me..

[...] Sisfokol [...]
on May 7, 2010 at 7:22 am newbie

-mas, download sisfokol versi 2.0 yg katanya gratis dimana ya? soalnya banyak link yg uda gak bisa … thx

-software aplikasi sekolah gratis lainnya apakah ada??
thx

~calon guru
on May 14, 2010 at 11:31 am sisfokol

@newbie :
semua sisfokol karya saya, saya tempatkan di milist sisfokol.

(http://yahoogroup.com/groups/sisfokol).

semuanya bisa kok di-download.

untuk v2.0, sudah gak saya sarankan. karena sudah ada v3.0 terbaru yang rilis januari kemarin.

kalo aplikasi buatan lain, silahkan googling aja :
‘aplikasi administrasi sekolah’.

banyak juga lho, pesaing sisfokol.

thanks. goodluck.
on May 18, 2010 at 11:08 pm emen

sip
on May 19, 2010 at 10:32 am sisfokol

@emen :
enjoy aja…
on May 26, 2010 at 1:28 am Wahyoe

Mas klo mau menambahkan header berupa gambar sendiri bisa ngga di index.html and gimana caranya ???
on May 29, 2010 at 11:24 am sisfokol

@Wahyoe :

iya bisa.

edit aja file tersebut, ‘/template/index.html’.
on June 2, 2010 at 5:57 am aryo

assalamualaikum…
terimakasih banyak atas source2nya…
terus berjuang ya mas….
on June 2, 2010 at 6:05 am aryo

caranya download sourcenya gimana ya mas?
heheh maklum newbie
on June 3, 2010 at 4:28 am abdul

SMAN 1 CABANGBUNGIN
on June 7, 2010 at 10:55 am sisfokol

@aryo :
wa’alaikum salam.

untuk download, silahkan kunjungi milist sisfokol, pada kanal ‘files’.

http://yahoogroup.com/groups/sisfokol/
on June 7, 2010 at 10:56 am sisfokol

@abdul :
thanks atas laporan sekolahnya…

sukses selalu ya…
on June 8, 2010 at 7:11 am artik

halo, saya lagi nyoba aplikasi ini bwt sekolah tempat saya kerja. Yang mau saya tanyakan adalah:
1. Di localhost, saya tidak bisa login – saya menggunakan fedora 12 dengan webserver diinstall secara native. apakah ada pengaturan lain spt di httacces misalnya (sy masih buta php)
2. Dalam pengisian nilai, saya masih bingung dengan kode NH dan NR.
Terimakasih atas bantuannya
on June 9, 2010 at 10:35 am sisfokol

@artik :
thanks telah coba karya saya.

1. memang pada versi2 rilis terbaru linux, ada beberapa setting webserver yang agak lain. apalagi sejak ada php versi 6.0, yang sangat berbeda dengan yang lama versi 5.0 .

httaccess juga perlu disettingkan ke php.ini .

silahkan lihat petunjuk di milist sisfokol dan blog ini ya…

2. untuk NH, itu nilah harian. sedangkan NR itu nilai remidi.
on June 10, 2010 at 10:21 am Gunawan

Usul bos, di sekolah kami data siswa sudah disiapkan dalam file excel, gimana kalao ditambah import data dari excel, biar nggak input data ulang…
on June 15, 2010 at 10:24 am sisfokol

@Gunawan :
thanks telah coba karya saya.

usul tersebut, telah saya pelajari. dan akan ada di rilis berikutnya ini.

silahkan cek ini ya :

http://sisfokol.wordpress.com/2010/06/09/tentang-rilis-sisfokol-edisi-revisi/
on June 26, 2010 at 6:22 am fatur

Assalamu’alaikum …

bos mw tanya punya software inventori tugas perkembangan (ITP/ATP)
makasih sebelumnya ..
on June 26, 2010 at 12:47 pm eko

bos saya sedang mencoba sisfokol_v3_smk_free dan saya install di server, saya menggunakan OS ubuntu setelah semua konfigurasinya saya ikuti kenapa muncul seperti ini :

(Warning: mysql_connect() [function.mysql-connect]: Access denied for user ‘root’@'localhost’ (using password: NO) in /var/www/sisfokol/inc/koneksi.php on line 20
Access denied for user ‘root’@'localhost’ (using password: NO))

Mohon pencerahannya…..
on June 26, 2010 at 3:44 pm masiyant

Kayaknya Sisfokol harus Menambah 1 halaman Baru untuk Menu Produk. Agar para Pengunjung gampang Untuk Melihat Poduk2 yang di hasilkan Oleh pak Agus DKK di Sisfokol ini.

kan dah ada lebih 2 produk yang di hasilkan di antaranya Sisfokol itu sendiri, Janisari, dan Sinau.

Ini hanya masukan saja.
on July 5, 2010 at 1:43 pm sisfokol

@fatur :
wa’alaikum salam.

waduh, maaf gak punya nih…
on July 5, 2010 at 1:47 pm sisfokol

@eko :
thanks telah coba karya saya…

tentang koneksi database mysql di ubuntu, itu harus punya akses user yang ber-password. jadi tidak bisa null password.

silahkan sesuaikan koneksi database sisfokol, dengan user password mysql yang ada.

kalo ternyata ingin bikin user mysql sendiri, silahkan gunakan phpmyadmin. pada user management.
on July 5, 2010 at 1:49 pm sisfokol

@masiyant :
iya, thanks sarannya.

kayaknya memang perlu ada pendataan etalase, biar para user gak bingung lagi… ;-D
on July 6, 2010 at 8:06 am Gunawan

Setelah sy coba sampai ke raport, ada yg perlu sy tanyakan…
1. Di SMK selain Adaptif, Normatif, Produktif masih ada Muatan Lokal. (sy sdh tambahkan di tabelnya) muncul di combonya. yang jadi masalah pada raport tidak ada nomor urutnya.
2. Pada raport Mapel tidak urut (Pendidikan Agama) di urutan ke 3 Setelah bahasa Indonesia. padahal Agama sy kasih no 1 No Sub 1.
gimana solusinya?
on July 19, 2010 at 2:38 pm diaz

saya sudah download v-3.0 dan mohon ijin untuk mengutak-atik source-nya, untuk inspirasi tugas saya. Dan terimakasih sebelumnya, saya harap anda tidak bosan2 dengan berbagi.
Sukses!!!!
on July 20, 2010 at 7:06 am sisfokol

@Gunawan :
1. silahkan anda utak-atik pada looping coding script, pada file raport_pdf.php

2. coba anda set lagi, semua nomor index urutan mapel…
on July 20, 2010 at 7:07 am sisfokol

@diaz :
enjoy aja…

saya tunggu juga saran dan kritiknya ya…
on July 20, 2010 at 7:29 am Sistem Informasi SMA dan SMP « Just take It Simple

[...] Sisfokol sisfokol adalah sistem informasi sekolah berbasis php. Aplikasi ini cukup simple, pengguna dapat melakukan kustomisasi pada sistem informasi yang akan dibuat. untuk menggunakan aplikasi ini, pengguna ditutut paling tidak mengerti mengenai bahasa pemrograman PHP. karena untuk melakukan custom awal program diperlukan kemampuan dasar dalam memahami sistem. untuk mendownload sisfokol dapat di lakukan di sini. [...]
on September 3, 2010 at 5:07 am ita

link buat download nya mana yah ko ga ada?
on September 3, 2010 at 1:29 pm sisfokol

@ita :
download-nya di milist sisfokol (dijelasin juga diatas lho…) :

http://tech.groups.yahoo.com/group/sisfokol/
on September 12, 2010 at 9:05 pm Aan

Ijin download + melakukan utak-atik sedikit untuk belajar membuat website(maklum, lulusan teknik mesin. Jadi harus belajar dari 0(NULL).)
Thanks ya pak……
on September 15, 2010 at 2:33 am sisfokol

@Aan :
iya… silahkan..

semoga karya saya bisa bermanfaat.

met belajar ya…
on September 16, 2010 at 4:13 am zhee

sya sdh download sisfokol smk, tp bingung cara instalasinya gmana….ada yang mw bantu ngga???
mohon pencerahannya………..
on September 16, 2010 at 4:16 am zhee

minta tolong donk…
cara instalasi sisfokol gmn sih………
on September 20, 2010 at 6:14 am sisfokol

@zhee :
silahkan baca semua petunjuk yang ada disini…

biar tidak terjadi perulangan penjelasan dalam satu halaman ya… ;-D
on September 23, 2010 at 3:23 am dikaell

gan mohon bantunnnya bgt mnt link download sisfokol yang terbaru dan cara instalasinya help me pliz . . .
on September 24, 2010 at 1:59 am sisfokol

@dikaell :
ntar akan pasang di arsip milist…
on September 24, 2010 at 7:22 am dikaell

thx yah gan . . .
jadi saya harus gabung dulu di milis sisfokol yah??
terima kasih
on September 30, 2010 at 1:28 am zhee

dear all…

tanya donk…..ko penempatan siswa per ruang hanya bisa dilakukan pada thn ajaran 2009/2010, kelas x, keahlian teknik mekanik otomotif, ruang A saja. ko yang lain ga bisa.. saya pengguna sisfokol smk v3 terus pake webserver XAMMP….
makasih……..
on September 30, 2010 at 1:23 pm sisfokol

@dikaell :
biar tahu info juga…

sebenarnya lagi diusahakan mirror server lain, cuman masih aq testing dahulu…
on September 30, 2010 at 1:26 pm sisfokol

@zhee :
bisa kok…

gak masalah…

lancar2 aja semuanya…

coba cek lagi, mungkin penempatan siswanya yang kurang tepat…
on October 1, 2010 at 12:28 am zhee

kembalikan permission folder sisfokol ke chmod 644… maksudnya gimana bos..? cara mengembalikannya gimana bos..?
on October 2, 2010 at 3:43 pm Ario

Pak, saya coba2 install dan sudah berhasil sampai keluar login page, tapi begitu login admin, guru dll halamannya tidak berubah, halaman login tidak bereaksi.

Kenapa ya pak?

Thanks,
AB
on October 4, 2010 at 6:51 am sisfokol

@ario :
itu karena ada beberapa setting webserver, yang harus anda ubah.

silahkan baca ini :
http://sisfokol.wordpress.com/2008/07/17/htaccesstxt/

http://sisfokol.wordpress.com/2009/11/02/post-data-sisfokol-by-egpcs/

@zhee :
itu untuk hak akses folder.

tentang chmod, silahkan baca ini :
http://sisfokol.wordpress.com/2010/01/12/perubahan-yang-ada-dalam-sisfokol_v3_codecegunan/

http://brightstarblogs.wordpress.com/2008/07/27/chmod-command/

http://www.novian.biz/2007/10/30/basic-command-in-linux/
on October 5, 2010 at 8:42 am akh_fey

lagi download nih, tak coba dulu ya….
on October 19, 2010 at 1:38 am akhrikas

dear sisfokol,

saya sudah coba install sisfokol sltp v.3, ppakai xamp,
waktu login akses admin tidak masalah, tetapi
waktu akses menggunakan tata usaha , maaf username dan password ada dimana yah ?

terima kasih
on October 19, 2010 at 10:02 am Steven

mas, saya sudah coba download sisfokol_v3_SMK dan mencoba melakukan instalasi dan mentok di tahap 1, untuk info saya instal di localhost, menggunakan WAMP,

mentoknya, ketika memasukkan info mengenai DB di formnya. ketika import database, hanya seperti ke refresh aja, dan di database ga terjadi apa2.

mohon bantuannya.

Thanks
on October 20, 2010 at 5:07 am sisfokol

@akh_fey :
ok.
on October 20, 2010 at 5:12 am sisfokol

@akhrikas :
contoh akses ada di readme sisfokol yang ada di dalam paket file-nya.

bisa juga reset lagi, via admin.
on October 20, 2010 at 5:17 am sisfokol

@Steven :
tentang setting tambahan, dari ‘.htaccess.txt’ ke ‘php.ini’ webserver anda, telah pernah dibahas pada halaman ini.

silahkan baca dari atas ya… ;-D
on October 29, 2010 at 7:16 am Nikolas D

Help me dunk.
Kalo download yg code:sawahsiring dimana?
Soalnya yg cegunan khan menu nya tidak kompatibel dgn browser baru?
saya cek ke sisfokol.idrepo.or.id ternyata isinya juga yg cegunan.

Tengkiyu.
on October 31, 2010 at 3:55 am sisfokol

@Nikolas D :
iya, nanti bisa di-download kesitu.

ini masih dalam perawatan, server donasi dari RumahIlmuIndonesia dan idREPO.

mg2 mulai senin, 02nop, bisa kembali normal. dan aq umumkan link-nya.
on November 1, 2010 at 10:56 pm husnitea

saya udah coba install paket smp dan jalan 100% tapi masalahnya ada beberapa menu yang tidak jalan……. gmn donk mas?? pleaaaaaaaaaaaaaase
on November 6, 2010 at 4:13 am sisfokol

@husnitea :
thanks telah coba.

menu yang gak jalan, terutama pada submenu.
karena gak kompatible script-nya dengan browser terbaru.

bisa diatasi dengan edit file2 di ‘/inc/menu/’.

silahkan dicoba ya…

goodluck.
on November 7, 2010 at 1:38 am belajar

mas mana ni sawahsiring+linuxbiasawae nya?? kok lum muncul yag
on November 10, 2010 at 2:54 pm sisfokol

@belajar :
ini masih pusing mikirin hosting dari para donatur.

belum jalan sempurna semua…

maklum, belum punya server hosting sendiri.
on November 11, 2010 at 2:24 pm aan

Salut buat siskofol. Baru nyoba udah terasa bakal enak nih program. Saya baru coba aja mas, install udah ok… tapi ada masalah nih mas..
1. Pas aku mau isi kelas A( pada penempatan ruang siswa) yg aku rubah R1 kenapa , kenapa kursor masuk pada tahun pelajaran dan ada kalimat TAHUN PELAJARAN belum dipilih. padahal udah aku klik. berapa kali dicoba tetap sama???

2. iMBASNYA lalu pada bagian penilaian pas mo diisi dan diklik ruang, nama siswa nya nggak tampil lagi??

saya pake wamserver…

Mohon pencerahannya mas…ditunggu.
on November 11, 2010 at 5:03 pm sandy

mas, ijin donlot ya…
mau tak utak-atik buat pembelajaran.
terima kasih banyak mas teruskan perjuanganmu.
nanti kalo saya menemui masalah saya akan coba tanya2 sama masnya, semoga ga ngerepotin.
Bravo!
on November 12, 2010 at 4:29 am sisfokol

@aan :
iya, thanks telah coba nih…

itu karena kegagalan dalam pengambilan nilai form.
sedikit bugs aja.

tp solusinya aq udah dapat.
juga telah aq terapkan pada sisfokol edisi revisi.

daripada anda kelamaan edit source-nya, lebih baik edit aja pada webserver-nya, di ‘php.ini’.

solusinya, silahkan coba anda aktifkan pada beberapa bagian dari ‘Data Handling’.

lalu restart apache.
on November 12, 2010 at 4:30 am sisfokol

@sandy :
iya. amin.
on November 12, 2010 at 6:48 am me.yanz

Selamat siang.. sesuai petunjuk kang onno ,. ane mampir kesini kang

q mo download , tapi link nya dimana yah .. ane (goblok) gan . mangap..

bisa kasih ??? haturnuwun kang
on November 13, 2010 at 4:24 am aan

Thanks buat sisfokol.. akhirnya bisa juga. Kemarin aku coba dulu di intranet local pake wamserver. Tapi aku coba masukkan di server web site jalan 100 %. Sip… tapi capek juga harus mengcopi source php.ini ke masing2 folder yang nggak jalan… trims.. sofware udah bagus banget.
on November 13, 2010 at 11:22 am aan

Mas..agus sisfokol yg jago… emang data guru nggak bisa dicetak versi pdf kayak data siswa ya??? Padahal itu penting banget. kalo bisa semua data bisa versi cetak pdfnya dong..

atau aku aja yg salah setting hingga nggak muncul..
trims ya… mohon ilmunya…
on November 13, 2010 at 1:00 pm sisfokol

@me.yanz :
siang juga…

halo.

enjoy aja.

link-nya ada di milist.
juga dijelaskan pada bagian awal halaman ini.
[http://tech.groups.yahoo.com/group/sisfokol/]

ingat, ini hanya khusus untuk SISFOKOL v3.0 (code:cegunan).

edisi revisi, SISFOKOL v3.0 (code:sawahsiring), hanya ada dalam bundle LinuxBIASAWAE.
on November 13, 2010 at 1:05 pm sisfokol

@aan :
he… he..

maklum, terkadang memang gitu.
beda webserver, beda masalah dengan beda solusi juga… ;-D

untuk guru, bisa print data profil dari data pegawai.

cek aja ya…
on November 17, 2010 at 2:10 pm widodo

bisa minta link download ?
on November 18, 2010 at 2:18 am sisfokol

@widodo :
ntar bisa download di :

*[http://www.idrepo.or.id/].

*[http://kambing.ui.ac.id/].

*[http://www.rumahilmu.org/].

*[http://www.baliexoticcoffee.com/].
on November 23, 2010 at 8:31 am widodo

maaf Numpang Minta bantuannya doonk..

si situs saya pake sisfokol. configurasinya udah bener tapi saat login dg adminstrator user=admin passwd=admin

muncul pesan password salah harap diulangi
dan g bisa login …

Mohon bantuannya…?

tolong kirimkan ke bull.mclaren@gmail.com

Trima kasih
on November 24, 2010 at 5:30 am akbar

@sisfokol

mas mau tanya, untuk sisfokol_smk_v3.0_sawahsiring kapan di rilisnya ya mas ?

saya dah cobain yang versi slta dan hasilnya bagus
on November 30, 2010 at 3:07 am sisfokol

@widodo :
mungkin ada yang salah dengan koneksi database-nya.
silahkan dicek lagi.

bisa jadi, ada yang pernah ganti password-nya tuh…
on November 30, 2010 at 3:08 am sisfokol

@widodo :
mungkin ada yang salah dengan koneksi database-nya.
silahkan dicek lagi.

bisa jadi, ada yang pernah ganti password-nya tuh…

@akbar :
udah rilis. silahkan anda download dari milist sisfokol.
on November 30, 2010 at 9:28 pm smk multi media mandir

wuiihhh …..
mangtsaffff kk …

aku buat tapi dekstop. ini versi web … semester depan ijin mo sinkronin ….
ijin donlod ya kk
on December 1, 2010 at 4:17 am sisfokol

@smk multi media mandir :
amin. thanks.

mohon saran dan kritiknya ya… ;-D
on December 14, 2010 at 3:10 pm guspur

lah gak ada link downloadnya
on December 16, 2010 at 2:21 am deehya

salam kenal pak…
pak gmana cra ya downloadnya?..link2 nya kok pada ga bisa

*[http://www.idrepo.or.id/].

*[http://kambing.ui.ac.id/].

*[http://www.rumahilmu.org/].

*[http://www.baliexoticcoffee.com/].

newbie..
on December 16, 2010 at 7:11 am ilyas

wah keren yah siskofol support nya setiap yang tanya di blog ini di respon, maju terus, dulu waktu masih jadi programmer freelance saya pengen bgt mengembangkan sisfokol eh tau2 malah dapet kerja di perusahaan yg bikin aplikasi mirip siskofol, akhirnya bikin sendiri deh, karena buat custom sisfokol ribet juga, tapi tetap semangat yah buat siskofol, semoga bisa dibuat model erp nya
on December 22, 2010 at 8:51 am jaka

sisfokol q gk jalan di windows. php my adminnya juga. gimana
on January 10, 2011 at 8:11 am sisfokol

@guspur, @deehya :
ada kok link download-nya.

udah aq jelaskan diatas.

coba juga, kunjungi :
http://www.baliexoticcoffee.com/linux_biasawae/
http://tech.groups.yahoo.com/group/sisfokol/message/995/
on January 10, 2011 at 8:13 am sisfokol

@ilyas :
amin.

mantap juga tuh…

sukses juga ya…

jangan lupa, saran dan kritiknya. . . ;-D
on January 10, 2011 at 8:15 am sisfokol

@jaka :
kalo sampe phpmyadmin anda gak jalan, berarti anda itu masih salah install mysql-server nya.

cek lagi ya… ;-D

berarti bukan sisfokol-nya yg error.
on January 28, 2011 at 7:47 am abonk

Ty pak, saya sedang mencobanya, kebetulan ada sekolah temen lagi butuh sebagai bahan pertimbangan untuk menggunakan sistem informasi terkomputasi di sekolahnya… nice share.. . semoga sukses selalu pak.
on January 28, 2011 at 11:44 pm sisfokol

@abonk :
ok. sukses selalu juga. . .

nanti kalo ada kesulitan dalam pengembangan, ada layanan kastumisasi ya. hubungi aja…
on February 2, 2011 at 11:27 am nda

mas… cara kerja sisfokol gmna yh???

apa bisa di gunakan untuk OS windowsXp???
trus cara pemasangan nya gmn???
ko stelah di download file nya bukan rar or zip???
mhon pnjelasn……………
on February 3, 2011 at 12:21 am sisfokol

@nda :
iya, betul. file kompresi pake .lzma .
ukurannya bisa lebih kecil dibandingkan .zip, .rar, ataupun .tar.bz2 .

anda bisa ekstrak pake : zipzag, 7zip, ataupun file roller gnome.

bisa juga dipasang di windows, misalkan pake webserver XAMPP.

cara pemasangannya, hampir sama dengan instalasi CMS.

untuk cara kerja, silahkan baca petunjuk yang ada dan pelajari blog sisfokol, ataupun milist sisfokol.

thanks. goodluck.
on February 23, 2011 at 12:11 am Fajri tirta nugraha

Mas ada sisfokol yg pke framework codeigniter gk?
klo ada mnta link nya donk…
Terima kasih sebelumnya….
on February 23, 2011 at 12:39 am sisfokol

@Fajri tirta nugraha :
waduh. . . gak pernah pake codeigniter.
soalnya bikin konsep ajax sendiri.
on February 23, 2011 at 5:41 am dika

mas saya mhon ijin untuk jadikan sisfokol sebagai TA saya boleh ngga. .
klo boleh mnt link download dong versi yang terbaru. . .
dan petunjuk2 yang lainnya atau mungkin ada ebooknya . .thx
on February 23, 2011 at 5:58 am Fajri tirta nugraha

kalo sisfokol ini konsepnya oop atw terstruktur yh??
ada laporan pembuatannya gk mas?misal pke dfd atw usecase??
on February 23, 2011 at 6:01 am Fajri tirta nugraha

ouh ia mas ebook penggunaan sisfokol ini link downloadny dmn yh?
teima kasih sebelumnya…
on March 1, 2011 at 4:49 am sisfokol

@dika :
silahkan download aja ke :
http://www.baliexoticcoffee.com/linux_biasawae/
http://tech.groups.yahoo.com/group/sisfokol/message/995/

untuk referensi, bisa baca di blog ini ataupun di milist sisfokol.
on March 1, 2011 at 4:51 am sisfokol

@Fajri tirta nugraha :
untuk perancangan, sisfokol pake konsep UML.
perancangan ini tidak saya publikasikan, karena demi keamanan para pengguna sisfokol.

untuk ebook, hanya ada dalam layanan donasi.
on March 28, 2011 at 9:29 am iqbal

mas,, sisfokol khusus buat di linux ya?
kok saya download di link atas dapetnya file linux??
mohon link download nya untuk di windows donk,,
on April 5, 2011 at 9:44 am sisfokol

@iqbal :
gak harus pake linux kok.

file .lzma itu kompresi baru. di windows, ada juga kok tool-nya.
on May 25, 2011 at 8:05 am subhan

saya sudah instal sisfokol dihosting dan berhasil. Namun waktu masukkan mata pelajaran dan guru pada menu akademik, tidak bisa. mohon solusinya
on May 27, 2011 at 7:38 am vindwisel

nyoba dl gan
on May 31, 2011 at 6:45 am bytescode

Ingin menambahkan, mirror baru biasawae sudah saya mirrorkan selain di baliexoticcofee, yaitu di server ITB.

Cek di sini :
http://ftp.itb.ac.id/pub/ISO-IMAGES/linux/linux_biasawae/

Semoga bermanfaat.
on June 13, 2011 at 12:24 am sisfokol

@subhan :
mungkin itu masalah menu.

coba gunakan SISFOKOL v3.0 (code:SawahSiring, oktober2010).
karena pada versi ini, masalah menu telah saya perbaiki.

tidak seperti SISFOKOL v3.0 (code:Cegunan, april2010).
on June 13, 2011 at 12:25 am sisfokol

@vindwisel :
ok. silahkan.
on June 13, 2011 at 12:27 am sisfokol

@bytescode :
ok. thanks.
on June 30, 2011 at 6:19 pm cuiiy

Mas adakah link sisfokol yg tanpa bundle linux biasa wae? File-nya terlalu besar soalnya, Thx
on July 10, 2011 at 5:56 pm hendy

mas agus, mau nanya lagi. saya pake sisfokol yg SD tapi kok kenaikan kelasnya cuma sampe kelas 3? abis tu lulus. kelas 4 keatas ga muncul menunya? apakah ini bug juga? gmn cara mengatasinya? thank u
on July 10, 2011 at 6:50 pm hendy

maaf, sudah bisa. ‘siswa_kenaikan.php’ pada folder admintu/akad diedit.
cara:
1. find (CTRL+F) ‘jika kenaikan’ trus ubah (($btxno == “1″) OR ($btxno == “2″)) menjadi (($btxno == “1″) OR ($btxno == “2″) OR ($btxno == “3″) OR ($btxno == “4″) OR ($btxno == “5″))
—-> ada 2 line yg harus diubah seperti ini

2. find (CTRL+F) ‘jika kelulusan’ trus ubah $btxno == “3″ menjadi $btxno == “6″
—-> ada 2 line yg harus diubah seperti ini

3. save dan dicoba
on July 12, 2011 at 7:24 pm nona

permisi, saya udah coba program sisfokol sd, tp pas lihat database nya apa udah masuk kaidah normalisasi database apa belum?
soalnya banyak field yg sama tp tabelnya terpisah,
on August 9, 2011 at 4:15 am adin

mw nanya dunk bagaimana cara runingnya setelah saya download?????
on August 17, 2011 at 3:53 pm sisfokol

@cuiiy :
untuk sementara, masih ada. tapi nanti, versi berikutnya, sudah gak terpisah dengan LinuxBIASAWAE.

http://tech.groups.yahoo.com/group/sisfokol/message/995/
http://tech.groups.yahoo.com/group/sisfokol/message/1143/
http://tech.groups.yahoo.com/group/sisfokol/message/1291/
http://tech.groups.yahoo.com/group/sisfokol/files/
on August 17, 2011 at 3:55 pm sisfokol

@hendy :
silahkan anda cek pada database, table ‘m_kelas’.
on August 17, 2011 at 3:59 pm sisfokol

@nona :
kita pakai sistem class sendiri, UML-nya.

memang begitulah konsepnya, tidak seperti umumnya normalisasi level dasar.
on August 17, 2011 at 4:06 pm sisfokol

@adin :
silahkan lakukan konfigurasi sisfokol. trus lakukan dump database .sql . trus jalankan browser. begitulah… simple-nya.
on October 3, 2011 at 2:14 am SURI

Assalamu’alikum…….
Mau tanya nih Pak

Kalo pengelolaan DANA BOS bisa ga di SISFOKOL???

Nuhun
on October 16, 2011 at 2:22 am sisfokol

@suri :
wa’alaikum salam.

belum ada sistem tersebut. soalnya jarang yang memberikan saran itu, untuk sisfokol ;-D . mungkin suatu saat nanti, akan ada.
on October 20, 2011 at 10:46 am teguh

mas masih eror nih, gimana solusinya, aku gak paham

Warning: mysql_connect() [function.mysql-connect]: Access denied for user ‘biasawae’@'localhost’ (using password: YES) in C:\Program Files\xampp\htdocs\sltp\inc\koneksi.php on line 20
Access denied for user ‘biasawae’@'localhost’ (using password: YES)

pada koneksi.php saya ubah agak keatas

$koneksi = mysql_connect($xhostname, $xusername, $xpassword) or die(mysql_error());
mysql_select_db($xdatabase) or die(database tidak di temukan);

tapi pesan di browser tetap menunjukkan eror line 20, padahal

$koneksi = mysql_connect($xhostname, $xusername, $xpassword) or die(mysql_error());
mysql_select_db($xdatabase) or die(database tidak di temukan);

di line 1
on October 27, 2011 at 8:59 am orang pengen bisa

register global harus on ya mas.
ada tambahan script

# php.ini #########
error_reporting = E_ALL & ~E_NOTICE
variables_order = “EGPCS”
register_long_arrays = On
register_argc_argv = On
auto_globals_jit = On

max_execution_time = 600
max_input_time = 600
memory_limit = 64M

display_errors = Off
log_errors = On
error_log = syslog
implicit_flush = On
output_buffering = 4096

session.save_handler = files
session.use_cookies = 1
session.name = SISFOKOLID
session.auto_start = 0
session.cookie_lifetime = 0
session.cache_limiter = nocache
session.cache_expire = 180

allow_url_fopen = On

file_uploads = On
upload_max_filesize = 10M
php_flag register_global = on <—- ini tambahannya –<
# php.ini ############
on October 29, 2011 at 2:36 am sisfokol

@teguh :
kalo itu sih, bukan error.

silahkan sesuaikan koneksi database-nya, dengan mysql-server di komputer anda.

itu karena entri user dan password, masih belum tepat. akhirnya gak nyambung ke database-nya.

pada halaman ini, sudah ada bahasannya. silahkan lihat bagian atasnya ya… ;-D
on October 29, 2011 at 2:37 am sisfokol

@orang pengen bisa :
mulai sisfokol v3.0 (code:sawahsiring), gak harus ‘on’.

udah langsung bisa.
on November 10, 2011 at 3:15 pm Arif

Waktu saya import database lewat phpmyadmin muncul pesan ini:

Error
SQL query:

# MySQL-Front Dump 2.5
#
# Host: localhost Database: sisfokol_smk_v2
# ——————————————————–
# Server version 4.0.18-max-debug
#
# Table structure for table ‘admin_ks’
#
CREATE TABLE admin_ks(

kd VARCHAR( 50 ) NOT NULL DEFAULT ”,
usernamex VARCHAR( 15 ) NOT NULL DEFAULT ”,
passwordx VARCHAR( 50 ) NOT NULL DEFAULT ”,
nip VARCHAR( 10 ) NOT NULL DEFAULT ”,
nama VARCHAR( 30 ) NOT NULL DEFAULT ”,
postdate DATETIME NOT NULL DEFAULT ’0000-00-00 00:00:00′
) TYPE = MYISAM ;

MySQL said:

#1064 – You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ‘TYPE=MyISAM’ at line 19

Ada soluisnya mas? Terima kasih
on November 11, 2011 at 2:48 am sisfokol

@Arif :
harusnya bisa tuh.

mungkin attribut database yang anda buat, bukan MyISAM ya…
on November 12, 2011 at 7:07 am Arif

Bukannya secara default sudah pakai MyISAM ? saya pakai XAMPP Windows 1.7.7
on November 12, 2011 at 10:42 pm sisfokol

@Arif :
m..m…. gitu ya.

kok bisa begitu ya… ?.
on November 13, 2011 at 9:46 am Arif

Apakah ada solusinya, master?
on November 16, 2011 at 12:50 am sisfokol

@arif :
saya ujicoba lagi, dengan versi phpmyadmin terbaru 2tahun terakhir, ternyata untuk database dari sisfokol v2.0, terkadang memang gagal dump .sql .

tapi kalo untuk sisfokol v3.0, bisa.

coba lakukan dump sql, via manual aja.
dengan perintah command line mysql-server.

atau, coba pake phpmyadmin versi lama.
on November 16, 2011 at 2:43 pm Arif

Untuk phpmyadmin versi lama, versi berapa yang direkomendasikan, master?
on November 18, 2011 at 5:31 pm Daftar Blog Tempat Belajar Linux dan Para ophrack3rz « ophrack3rz

[...] Downloads LinuxBIASAWAE & SISFOKOL (By Agus Muhajir) :http://sisfokol.wordpress.com/download/ [...]
on November 19, 2011 at 12:42 am sisfokol

@Arif :
saya pake phpmyadmin v3.3.2
on November 23, 2011 at 4:22 pm akismet-8c78802ed5f41159c9c7ffcbb4b58e23

dimana yah link buat download sisfokol terbaru…
on March 12, 2012 at 8:11 am el

mas, kpn nih sisfokolnya bisa di donlot?
on March 17, 2012 at 12:23 pm Rizal Mutaqien

Aduh ane lagi mudeng nyari script untuk universitas kalo ada yang tahu kasih tahu dong :

http://sekilastips.info
http://rizalblogs.info
on March 19, 2012 at 1:54 am sisfokol

belum ada nih…
on March 19, 2012 at 1:55 am sisfokol

nanti bs download di milist sisfokol.
on March 19, 2012 at 4:36 am el

nanti kpn mas?zzzzZzzzz. lol
on March 20, 2012 at 7:59 am sisfokol

silahkan lihat infonya di milist sisfokol.
on March 20, 2012 at 9:46 am Adams

Mas, tolong dibantu, kira2 dimana kesalahan saya,

setelah login administrator
dengan user admin dan password admin,
maka dibagian header muncul seperti ini :

Notice: Use of undefined constant nocache – assumed ‘nocache’ in C:\xampp\htdocs\sisfokol_v4_smk\adm\index.php on line 33

Notice: Undefined variable: diload in C:\xampp\htdocs\sisfokol_v4_smk\inc\niltpl.php on line 28

Notice: Undefined variable: wkdet in C:\xampp\htdocs\sisfokol_v4_smk\inc\niltpl.php on line 35

Notice: Undefined variable: wkurl in C:\xampp\htdocs\sisfokol_v4_smk\inc\niltpl.php on line 36
on March 20, 2012 at 9:47 am ini SISFOKOL v4.0 (code:NyurungBAN) « SISFOKOL -> Freedom. OpenSource. Commercial Support.

[...] Download [...]
on March 20, 2012 at 9:49 am sisfokol

oh.. kalo itu sih, bukan error. cuman pengecekn coding aja. soalnya saya banyak bikin variable sendiri.

matikan aja ‘display_errors’ pada php.ini webserver anda.
on March 26, 2012 at 10:29 am affandy

mas aku udah unduh kok ngak bisa sibuka sisfokol_v4_smk.tar.lzma
on March 29, 2012 at 1:09 am boby agustian

kl begini kira2 kenapa ya???

Warning: mysql_connect() [function.mysql-connect]: Access denied for user ‘biasawae’@'localhost’ (using password: YES) in C:\xampp\htdocs\sisfokol_v4_smk\inc\koneksi.php on line 24
Access denied for user ‘biasawae’@'localhost’ (using password: YES)
on March 29, 2012 at 2:15 am sisfokol

@affandy :
bisa kok.
on March 29, 2012 at 2:16 am sisfokol

@boby agustian :
sesuaikan dong, koneksi database-nya dengan mysql-server di webserver anda.
on March 30, 2012 at 12:12 pm assalman

Tolong dikirim sisfokol v. 4.0 untuk mts (sltp) keemail saya kang.
on March 31, 2012 at 6:47 am prazt811

sisfikol SLTA sampai sekarang belum bisa di download boz..???
on March 31, 2012 at 6:49 am prazt811

sisfokol yang SLTA belum bisa di download boz sampai sekarang…???
on March 31, 2012 at 7:51 am sisfokol

sudah ada. silahkan anda download ya.
on March 31, 2012 at 7:52 am sisfokol

silahkan nanti download sendiri saja ya.
on April 2, 2012 at 2:52 am Puji H. Fredelina

mas admin gmna bukanya..pkek archive rar atau zip kok bisa..pke softwere apa bukanya…
on April 2, 2012 at 5:47 am sisfokol

ada yang bilang, kalo di windows bs pake 7zip.
on April 2, 2012 at 12:32 pm tata

gimana cara downloadbya gan
on April 2, 2012 at 11:46 pm sisfokol

pada halaman ini, ada alamat situs yang bisa anda kunjungi untuk download. silahkan dicoba ya…
on April 10, 2012 at 7:01 am nugie

kok under linux … yang windows mana ?
on April 10, 2012 at 3:50 pm sisfokol

@nugie : dari dulu sisfokol bisa berjalan di beragam sistem operasi kok. yang penting ada webserver.
on April 11, 2012 at 4:09 am dhea

aku udah donlod sisfokol v4….. gmn cara ekstraknya di ubuntu gan…..
on April 11, 2012 at 10:17 am sisfokol

@dhea : pastikan pada aplikasi ekstrak anda, mendukung kompresi .lzma ya…
on April 11, 2012 at 7:04 pm dhe

ok mas bro udah berhasil tak unduh…… tapi mata pelajaran pada raport kok dobel ya…. yang satu KKM nya 65, yang satunya KKM nya sesuai dengan isian kita…..trus solusinya gmn?
on April 11, 2012 at 7:25 pm dhea

oh iya mas bro lupa : sekalian pengumuman kelulusannya juga belum ada
on April 11, 2012 at 7:27 pm dhea

mas bro di raport mata pelajarannya kok dobel, yang satu KKMnya 65 yang satunya KKMnya sesuai isian kita…. gmn solusinya??
oh iya mas bro lupa : sekalian pengumuman kelulusannya juga belum ada
on April 12, 2012 at 7:22 am sisfokol

@dhe : coba entri lagi aja ya…
on April 12, 2012 at 7:22 am sisfokol

@dhea : benar, menu itu memang belum ada.
on April 16, 2012 at 7:45 am dowex

mas.. aq cb ekstrak pke 7zip ug gagal ya?? ada yang eror gtu.. MOHON PENCERAHAN pliss….
MAKASIH sbelumnya…
on April 18, 2012 at 9:42 pm eman

untuk donlodnya dimana ya?
on April 19, 2012 at 6:36 am andri

mas saya ada masalah pada saat di buka di webroser tulisannya Warning: Cannot modify header information – headers already sent by (output started at /var/www/sisfokol-smk/inc/fungs.php:341) in /var/www/sisfokol-smk/inc/fungsi.php on line 342.
disini saya menggunkan sisfokol v3 smk dengan sistem operasi debian 5 leny
on April 25, 2012 at 9:54 am Amy sidra

ijin donlod gan, saya coba. kalo sangat membantu saya maka saya akan bantu sebar di website saya
on April 26, 2012 at 11:14 pm sisfokol

@amy : iya. mg2 bermanfaat ya…
on April 26, 2012 at 11:16 pm sisfokol

@andri : itu bukan error mas. karena saya banyak bikin variable sendiri. coba matikan aja, ‘display_errors’ pada php.ini webserver anda.
on April 26, 2012 at 11:16 pm sisfokol

@eman : diatas sudah saya kasi link-nya…
on April 26, 2012 at 11:18 pm sisfokol

@dowex : sudah bisa semua kok pak. silahkan dicoba lagi ya…
on May 2, 2012 at 12:56 am diana

misalnya untuk podok pesantren gmna mas?? untuk psb-nya menyatukan antara sd, smp, dan sma diwaktu pendafaran – pengumuman diterima,, bisa kasih solusi… trimksih..
on May 3, 2012 at 10:43 am uziesetiawan

pas coba di localhost dah bisadi pake gan,ni ane dapet masalah pas di upload di webserver ni pesannya gan

You don’t have permission to access /sisfo/login.php on this server.

Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument to handle the request.
on May 3, 2012 at 2:37 pm phazoy

menggunakan server xampp 1.7.3 bisa gak sisfokol yang untuk SMP om..
mohon pencerahannya.
on May 6, 2012 at 10:40 pm sisfokol

@phazoy : bisa .
on May 6, 2012 at 10:41 pm sisfokol

@uziesetiawan : seharusnya bisa juga mas. coba firewall pada hosting webserver-nya, dicek lagi hak aksesnya ya.
on May 6, 2012 at 10:43 pm sisfokol

@diana : bisa juga. yang penting, daya tampung bisa sesuai. dan waktu pendaftaran sama. serta nomor pendaftaran, bisa anda catat manual. atau kalo butuh yang lebih mantap, nanti ambil layanan kastumisasi aja ya…
on May 6, 2012 at 10:46 pm sisfokol

@amy : mg2 bisa bermanfaat.
on May 8, 2012 at 4:47 pm qwertyfahry

kalau saya ingin mengetahui lebih dalam tentang sistem penjadwalan mengajar disini bagaimana ? bisakah admin memberi tahu secara detail hanya tentang penjadwalan saja ? terutama masalah struktur tabel dari database jadwalnya. terimakasih.
on May 10, 2012 at 8:35 am sisfokol

@qwertyfahry : nanti via japri di email saya ya. hajirodeon@yahoo.com
on May 10, 2012 at 11:47 pm tarno

sisfokol yang rar ga ada bos
on May 11, 2012 at 12:42 am prazt811

kok ndak bisa download SISFOKOL_v4.0_SMA ya mas
on May 11, 2012 at 12:45 am prazt811

pakai link yang mana, cz mau klik yg di tulisan SISFOKOL_v4.0_SMA tidak bisa
on May 11, 2012 at 1:33 am prazt811

gmn ya downloadnya * SISFOKOL_v4.0_SMA
on May 12, 2012 at 1:34 pm dedi

makasih gan berguna bagi saya
on May 13, 2012 at 2:38 am Nur Taufik

assalamu’alakum…
mas bagaimana caranya menghapus data calon siswa baru ..terima kasih
on May 13, 2012 at 3:41 am diana

Permisi mas, mau nanya lagi nih… Saya akan menggabungkan ke-3 psb tersebut sd-smp-sma menjadi psb pondok…. nah yg sya bingungkan masalh databse tabel siswa,,, enaknya di jadikan satu tabel siswa apa tabel siswa-nya sendiri2., ada tabel siswa sd, tabel siswa smp, dan tabel siswa sma… Thx…
on May 15, 2012 at 3:08 am sisfokol

@prazt811 : diatas sudah ada alamat situsnya. silahkan dibuka ya…
on May 15, 2012 at 3:10 am sisfokol

@diana : jadikan satu aja, bisa.
on May 15, 2012 at 3:11 am sisfokol

@dedi : amin.
on May 15, 2012 at 3:12 am sisfokol

@tarno : gak ada. lebih kecil .lzma lho, dibandingkan .rar
on May 15, 2012 at 3:20 am sisfokol

@Nur Taufik :
wa’alaikum salam.

sementara masih manual, silahkan cek table ‘psb_siswa_calon’.
on May 16, 2012 at 8:13 am iyul

saya sangat tertarik untuk mencoba sourcecodenya tp sayang untuk dowload sisfokolnya uda ga ada linknya, hanya tulisan saja.mohon linknya diberikan, terima kasih
on May 17, 2012 at 11:51 pm sisfokol

@iyul : alamat link-nya itu ada diatas. anda bisa download dari daftar link yang ada. soalnya sumber download banyak lokasinya.
on May 17, 2012 at 11:57 pm sisfokol

@all : bagi yang mau download sisfokol, silahkan baca semua halaman ini dengan baik. mengingat alamat link atau mirror server lebih dari satu, anda bisa pilih link download yang anda inginkan. tujuan dari adanya mirror server lebih dari satu, agar anda memiliki kemudahan dalam hal kecepatan download dan alternatif lokasi link lain, jika link yang dituju sedang padat pengunjung.
on May 18, 2012 at 4:25 pm ady

boleh minta link download sisfokol smp ver4 nggk???
cz ada yg ku donlot tp eror extensi .tar.****.
on May 20, 2012 at 8:02 pm sisfokol

@ady : tidak ada yang error. silahkan coba lagi download.
on May 23, 2012 at 1:03 am diana

Mas, tanya lagi nggeh, misalkan dijadikan satu tabel dr sd-sma trus untuk pembayaran-penerimaann gimana ya nyelek ke tabelnya?? apa diberi status???
on May 23, 2012 at 7:22 am sisfokol

@diana : sebenarnya bisa juga kok. silahkan diutak-atik ya…
on May 23, 2012 at 8:03 am sigit

Permisi admin, mau nanya untuk soal database tabel, itu kok semua tabel ada field kd ya?? thanks….
on May 23, 2012 at 10:36 pm yanto

q juga mau tanya jg untuk yg PSB, itu kok ada nilai prestasi juga dr mana ya?? dr awal pndftaran kan sdh ad nilai UN, US, Ujiaan Mapel & wawancara… sdngkn nilai prestasi dr mana asalnya ?? Mksih
on May 29, 2012 at 1:18 pm sisfokol

@yanto : nilai prestasi kan untuk pertimbangan kita aja. yang entri bukan calon siswa.
on May 29, 2012 at 1:19 pm sisfokol

@sigit : iya, field itu untuk relasi antar table nantinya. karena memang, saya membuat ID sendiri, lewat php. tidak lewat autonumber atau angka khusus dari database mysql.

Comments RSS

	sisfokol on Download
	sisfokol on Download
	sisfokol on Tentang
	iyan on Tentang
	yanto on Download
	sigit on Download
	sisfokol on Download
	sisfokol on Tentang
	sisfokol on F.A.Q
	diana on Download
	iyan on Tentang
	akismet-e864a566ab62… on F.A.Q
	sisfokol on F.A.Q
	sisfokol on Download
	ady on Download

SISFOKOL -> Freedom. OpenSource. Commercial Support.

Sistem Informasi Sekolah Berbasis Open Source, Yang Free Software Banget…

Download

Like this:

364 Responses

Leave a Reply Cancel reply

SISFOKOL by…

Pages

Categories

Barang Dagangan Lain. . .

Beli Paket CD SISFOKOL versi Donasi

Konsep Freedom OpenSource Software

Lain - Lain...

Top Posts

Top Clicks

Recent Comments

Archives

Blog Stats

Meta

Follow “SISFOKOL -> Freedom. OpenSource. Commercial Support.”

June 2012
M	T	W	T	F	S	S
« May
				1	2	3
4	5	6	7	8	9	10
11	12	13	14	15	16	17
18	19	20	21	22	23	24
25	26	27	28	29	30